• 자원환경지질
• /
• 제36권5호
• /
• pp.387-389
• /
• 2003

한반도지역에서 중력 기준점 설치, 기 설치된 중력 기준점의 중력 값들의 정밀도 향상 및 중력가속도 값을 얻기 위하여, 표준연구원(KRISS)은 한 중 공동으로 1996년 10월8일∼11월8일까지, 국립지리원(NGI)은 한$.$일공동으로 1999년 12월10∼16일까지 각각 대전과 수원에서 절대 중력계(Laser Interferometry Absolute Gravimeter type NIM-II와 FG5 Absolute Gravity meter(#203))를 사용하여 절대중력관측을 수행하였다. 표준연구원과 국립지리원이 관측한 절대 중력 값은 각각 979,829.609${\pm}$006 mGal(대전), 979,918.775${\pm}$0.0001 mGal(수원)이다. 앞으로 한반도에서 지구과학분야 활성화를 위해서 더 많은 절대중력 기준점의 확보가 필요하다고 사려된다.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.50-54
• /
• 2012

본 연구는 커패시터 전극 응용을 위한 복합체 전극에 관련된 것으로 PANI와 PANI/$TiO_2$로 구성된 수퍼커패시터 전극을 제조하여 cyclic voltammetry(CV)를 이용하여 6 M KOH 수용액에서 축전량(capacitance) 특성을 조사하였다. PANI/$TiO_2$ 복합체는 간단한 in-situ 방법을 통해 다양한 비율로 합성되었다. PANI/$TiO_2$ 복합체의 형태학(morphology)적 특징을 파악하기 위해서 주사전자현미경(SEM)과 투과전자현미경(TEM)을 통해 분석하였고, X선 회절 분석기(XRD)를 이용하여 복합체의 결정화도와 담지된 $TiO_2$의 입자크기를 확인하였다. 전기화학적 시험 결과, 아닐린 대비 $TiO_2$의 주입량이 10 wt%일 때 가장 우수한 축전량(626 $Fg^{-1}$)을 나타냈고 높은 주사속도인 100 $mVs^{-1}$에서 286 $Fg^{-1}$의 비축전량을 나타내었다. 이는 폴리아닐린(PANI) 매트릭스(matrix)에 균일하게 담지된 $TiO_2$(~6.5 nm)가 효과적인 연결 구조를 형성하여 전하이동현상이 증가하고, 축전이 가능한 반응면적이 증가한 것과 관련있다고 판단된다.

• Earthquakes and Structures
• /
• 제10권5호
• /
• pp.1033-1048
• /
• 2016

An analytical solution based on the neutral surface concept is developed to study the free vibration behavior of simply supported functionally graded plate reposed on the elastic foundation by taking into account the effect of transverse shear deformations. No transversal shear correction factors are needed because a correct representation of the transversal shearing strain obtained by using a new refined shear deformation theory. The foundation is described by the Winkler-Pasternak model. The Young's modulus of the plate is assumed to vary continuously through the thickness according to a power law formulation, and the Poisson ratio is held constant. The equation of motion for FG rectangular plates resting on elastic foundation is obtained through Hamilton's principle. Numerical examples are provided to show the effect of foundation stiffness parameters presented for thick to thin plates and for various values of the gradient index, aspect and side to thickness ratio. It was found that the proposed theory predicts the fundamental frequencies very well with the ones available in literature.

• Steel and Composite Structures
• /
• 제28권5호
• /
• pp.541-557
• /
• 2018

This paper presents the influence of carbon nanotubes (CNTs) waviness and aspect ratio on the vibrational behavior of functionally graded nanocomposite sandwich annular sector plates resting on two-parameter elastic foundations. The carbon nanotube-reinforced (CNTR) sandwich plate has smooth variation of CNT fraction along the thickness direction. The distributions of CNTs are considered functionally graded (FG) or uniform along the thickness and their mechanical properties are estimated by an extended rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. Effects of CNT distribution, volume fraction, aspect ratio and waviness, and also effects of Pasternak's elastic foundation coefficients, sandwich plate thickness, face sheets thickness and plate aspect ratio are investigated on the free vibration of the sandwich plates with wavy CNT-reinforced face sheets. The study is carried out based on three-dimensional theory of elasticity and in contrary to two-dimensional theories, such as classical, the first- and the higher-order shear deformation plate theories, this approach does not neglect transverse normal deformations. The sandwich annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free.

• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.533-547
• /
• 2018

In this paper the time-dependent creep analysis of a thick-walled FG cylinder with finite length subjected to axisymmetric mechanical and thermal loads are presented. First order shear deformation theory (FSDT) is used for description of displacement components. Inner and outer temperatures and outer pressure are considered as thermo-mechanical loadings. Both thermal and mechanical loadings are assumed variable along the axial direction using the sinusoidal distribution. To find temperature distribution, two dimensional heat transfer equation is solved using the required boundary conditions. The energy method and Euler equations are employed to reach final governing equations of the cylinder. After determination of elastic stresses and strains, the creep analysis can be performed based on the Yang method. The results of this research indicate that the boundaries have important effects on the responses of the cylinder. The effect of important parameters of this analysis such as variable loading, non-homogeneous index of functionally graded materials and time of creep is studied on the behaviors of the cylinder.

• Structural Engineering and Mechanics
• /
• 제64권5호
• /
• pp.591-610
• /
• 2017

This paper is concerned with the static analysis of variable thickness of two directional functionally graded porous materials (FGPM) circular plate resting on a gradient hybrid foundation (Horvath-Colasanti type) with friction force and subjected to compound mechanical loads (e.g., transverse, in-plane shear traction and concentrated force at the center of the plate).The governing state equations are derived in terms of displacements based on the 3D theory of elasticity, assuming the elastic coefficients of the plate material except the Poisson's ratio varying continuously throughout the thickness and radial directions according to an exponential function. These equations are solved semi-analytically by employing the state space method (SSM) and one-dimensional differential quadrature (DQ) rule to obtain the displacements and stress components of the FGPM plate. The effect of concentrated force at the center of the plate is approximated with the shear force, uniformly distributed over the inner boundary of a FGPM annular plate. In addition to verification study and convergence analysis, numerical results are displayed to show the effect of material heterogeneity indices, foundation stiffness coefficients, foundation gradient indices, loads ratio, thickness to radius ratio, compressibility, porosity and friction coefficient of the foundation on the static behavior of the plate. Finally, the responses of FG and FG porous material circular plates to compound mechanical loads are compared.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.229-229
• /
• 2011

부유 게이트 Floating gate (FG) 플래시 메모리 소자의 단점을 개선하기 위해 전하 포획 층에 전하를 저장하는 전하 포획 플래시 메모리 Charge trap flash (CTF)소자에 대한 연구가 활발히 진행되고 있다. CTF소자는 FG플래시 메모리 소자에 비해 비례축소가 용이하고 긴 retention time을 가지며, 낮은 구동 전압을 사용하는 장점을 가지고 있다. CTF 소자에서 비례축소에 따라 단채널 효과와 펀치-쓰루 현상이 증가하는 문제점이 있다.본 연구에서는 CTF 단채널 효과와 펀치-쓰루 현상을 감소시키기 위한 방법으로 silicon-on-insulator (SOI) 기판을 사용하였으며 SOI기판에서 절연층의 깊이에 따른 전기적 특성을 고찰하였다. silicon-oxide-nitride-oxide-silicon(SONOS) 구조를 가진 CTF 메모리 소자를 사용하여 절연층의 깊이 변화에 따른 subthreshold swing특성, 쓰기-지우기 동작 특성을 TCAD 시뮬레이션 툴인 Sentaurus를 사용하여 조사하였다. 소스와 드레인의 junction depth는 20 nm 사용하였고, 절연층의 깊이는 5 nm~25 nm까지 변화하면서 절연층의 깊이가 20 nm이하인 fully depletion 소자에 비해, 절연층의 깊이가 25 nm인 소자는 partially depletion으로 인해서 드레인 전류 레벨이 낮아지고 subthreshold swing값이 증가하는 현상이 나타났다. 절연층의 깊이가 너무 얕을 경우, 채널 형성의 어려움으로 인해 subthreshold swing과 드레인 전류 레벨의 전기적성질이 SOI기판을 사용하지 않았을 경우보다 떨어지는 경향을 보였다. 절연층의 깊이가 17.5 nm인 경우, CTF소자의 subthreshold swing과 드레인 전류 레벨이 가장 좋은 특성을 보였다.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1279-1298
• /
• 2015

In this paper, free vibration characteristics of a rotating double tapered functionally graded beam is investigated. Material properties of the beam vary continuously through thickness direction according to the power-law distribution of the volume fraction of the constituents. The governing differential equations of motion are derived using the Hamilton's principle and solved utilizing an efficient and semi-analytical technique called the Differential Transform Method (DTM). Several important aspects such as taper ratios, rotational speed, hub radius, as well as the material volume fraction index which have impacts on natural frequencies of such beams are investigated and discussed in detail. Numerical results are tabulated in several tables and figures. In order to demonstrate the validity and accuracy of the current analysis, some of present results are compared with previous results in the literature and an excellent agreement is observed. It is showed that the natural frequencies of an FG rotating double tapered beam can be obtained with high accuracy by using DTM. It is also observed that nondimensional rotational speed, height taper ratio, power-law exponent significantly affect the natural frequencies of the FG double tapered beam while the effects of hub radius and breadth taper ratio are negligible.

• Structural Engineering and Mechanics
• /
• 제55권5호
• /
• pp.1001-1014
• /
• 2015

Bending analysis of functionally graded (FG) nano-plates is investigated in the present work based on a new sinusoidal shear deformation theory. The theory accounts for sinusoidal distribution of transverse shear stress, and satisfies the free transverse shear stress conditions on the top and bottom surfaces of the plate without using shear correction factor. The material properties of nano-plate are assumed to vary according to power law distribution of the volume fraction of the constituents. The size effects are considered based on Eringen's nonlocal theory. Governing equations are derived using energy method and Hamilton's principle. The closed-form solutions of simply supported nano-plates are obtained and the results are compared with those of first-order shear deformation theory and higher-order shear deformation theory. The effects of different parameters such as nano-plate length and thickness, elastic foundation, orientation of foundation orthtotropy direction and nonlocal parameters are shown in dimensionless displacement of system. It can be found that with increasing nonlocal parameter, the dimensionless displacement of nano-plate increases.

• Advances in nano research
• /
• 제5권2호
• /
• pp.141-169
• /
• 2017

In this paper, a nanobeam connected to a rotating molecular hub is considered. The vibration behavior of rotating functionally graded nanobeam based on Eringen's nonlocal theory and Euler-Bernoulli beam model is investigated. Furthermore, axial preload and porosity effect is studied. It is supposed that the material attributes of the functionally graded porous nanobeam, varies continuously in the thickness direction according to the power law model considering the even distribution of porosities. Porosity at the nanoscopic length scale can affect on the rotating functionally graded nanobeams dynamics. The equations of motion and the associated boundary conditions are derived through the Hamilton's principle and generalized differential quadrature method (GDQM) is utilized to solve the equations. In this paper, the influences of some parameters such as functionally graded power (FG-index), porosity parameter, axial preload, nonlocal parameter and angular velocity on natural frequencies of rotating nanobeams with pure ceramic, pure metal and functionally graded materials are examined and some comparisons about the influence of various parameters on the natural frequencies corresponding to the simply-simply, simplyclamped, clamped-clamped boundary conditions are carried out.