• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 춘계학술대회
• /
• pp.47-50
• /
• 1990

In this study, the degree of spectral transfer to lower frequency caused by accumulation of Latic acid inside the muscle is estimated the convintional dip analysis, zero-crossing method and FFT method have intrinsic errors and estimation problems in case of severe noise. The new spectral analysis method using "$2^{nd}$ order Maximum Entropy Method" was applied to estimate mean frequency and we confirmed that this new method yields fast and reliable estimation over the FFT method.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.640-647
• /
• 1998

다중 분해능 웨이블릿 해석법을 마이크로스트립 패치 안테나의 산란해석에 적용하였다. 다충구조에 대한 스펙 트럼 영역 그린 함수(spectral domain Green's dyad)의 특성올 공간-스펙트럼 영역 표현법을 이용하여 살펴보고, 스펙트럼 영역 웨이블릿을 주어진 문제에 적용하는 것이 유용함을 관찰하였다. 적분방정식에 모멘트법을 이 용하여 행렬방정식을 얻고, 그 풀이에 CG(conjugate gradient)법과 스펙트럼 영역 웨이블릿올 결합하여 효율 적으로 문제를 풀이할 수 있다. 단충구조 위에 놓인 정방형 패치에 대하여 기폰의 모멘트법 결과와 다충 분해능 웨이블릿 해석법올 적용한 결과를 비교하였다.

• 한국수산과학회지
• /
• 제27권5호
• /
• pp.594-604
• /
• 1994

The storm surges caused by the typhoon Brenda in 1985 were studied by analysing tidal observation data at 7 stations along the south coast of the Korean peninsula. The tidal deviation at these stations along the coast are discussed in association with meteorological data. The sea level anomalies were studied by means of the Empirical Orthogonal Function (EOF) analysis and the Fast Fourier Transform(FFT) method. From the result of EOF analysis, the temporal and spatial variations of storm surge were described by the first mode of EOF, which is $73\%$ of the total variances during the passage of typhoon Brenda. From the results of FFT spectral analysis, the peak energy of the autospectrum for surge, atmospheric pressure, and wind stress appeared in the low frequency fluctuations band. The result of FFT analysis showed that the typhoon surge was related chiefly to the atmospheric pressure change in an open bay such as Cheju and Keomundo harbor, while it was influenced mainly by the wind stress in the semi-enclosed waters of Yeosu, Chungmu and Kadukdo.

• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.430-436
• /
• 1988

LSF(Line Spectral Frequency) derived from LPC has known as a very useful transmission parameter of speech signals, for it has a good linear interpolation characteristics and a low spectrum distortion at low bit rates coding. This paper presents that it is possible to extract directly the formant frequencies of speech signals from LSF parameter without application of FFT algorithm by comparing the distribution of LSF parameter with the frequency distribution of analysis filter. This paper suggests the advanced algorithm that results in improving the speed of convergence at analytic solution method. Also, for the flexibility of parameters, the process that transforms from LSF to LPC is presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.474-477
• /
• 2002

Hearing loss caused by exposure to industrial machine noise results in devastating disability that is mostly preventable. And recent researches indicate that the noise may also induce hypertension and cardiovascular disease. In addition the sleep polygraph provides many indicators of sleep disturbance by the noise. In this paper we make an analysis on ball bearing machine noise, a kind of the industrial noise. The analysis of Its power spectrum is based on FFT(Fast Fourier Transform). And then the spectral results of the noise are compared with that of the spectrum for an auditory signal. The signal is measured from the pronunciation of two Koreans. Finally we suggest the most important stratagem to prevent the noise for worker's health and efficiency.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.402-405
• /
• 1997

The analysis of heart sounds is a noninvasive diagnostic method useful to diagnose heart valve function. In this paper we compared the ability of spectral analysis method for prosthetic heart valve sounds. Phonocardiograms of prosthetic heart valve were analyzed in order to derive frequency domain feature suitable for the classification of the valve state. The FFT-based methods did not provide sufficient frequency resolution to completely characterize the spectrum of prosthetic heart valve sounds. A high resolution parametric methods were shown to give superior frequency resolution. In parametric methods, all methods provide a 1st & 2nd & 3rd frequency component. But Shank method provided a most dominant frequency peak.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.275-278
• /
• 1997

Standard methods estimating the power spectral density(PSD) from an irregularly sampled cardiac event series require deriving a new evenly-spaced signal applicable to those methods. To avoid that requirement, in this study, the power spectrum of heart rate variability was estimated by Lomb-Scargle's algorithm, which is a means of obtaining PSD estimates directly from irregularly sampled timeseries observed in astronomy. To assess the performance of Lomb-Scargle algorithm in the power spectral analysis of heart rate variability, it was applied to various cardiac event series derived through integral pulse frequency modulation model(IPFM) simulation and from real ECG signals, and the resultant power spectra was compared with those obtained by a conventional method based on the FFT. In result, it is concluded that Lomb-Scargle's periodogram is very effective in the power spectral analysis of heart rate variability, especially in the presence of arrhythmia and/or dropouts of cardiac events.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.424-429
• /
• 2013

The trolley carrying the pod moves along by the airfield runway. The pod through the trolley are subjected to vibration arising from the ground state, the precision optical components in the pod can have a significant impact. The road tests were conducted by using the measurement pod to remove the risk for the project. The measurement pod was composed with the ACRA, sensors, battery. The accelerometers were attached to get the acceleration through the road condition. The PSD envelop was calculated by FFT from the acceleration. The driving safety was proven through comparing the measurement data and MIL-STD-810G specification.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.288-294
• /
• 2013

The diagnosis of motor failures using an on-line method has been the aim of many researchers and studies. Several spectral analysis techniques have been developed and are used to facilitate on-line diagnosis methods in industry. This paper discusses the first application of a motor flux spectral analysis to the identification of broken rotor bar (BRB) faults in induction motors using a multiple signal classification (MUSIC) technique as an on-line diagnosis method. The proposed method measures the leakage flux in the radial direction using a radial flux sensor which is designed as a search coil and is installed between stator slots. The MUSIC technique, which requires fewer number of data samples and has a higher detection accuracy than the traditional fast Fourier transform (FFT) method, then calculates the motor load condition and extracts any abnormal signals related to motor failures in order to identify BRB faults. Experimental results clearly demonstrate that the proposed method is a promising candidate for an on-line diagnosis method to detect motor failures.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.217-220
• /
• 1996

In this paper, we compare three mehods to obtain PSD of HRV - FFT, AR modeling, and residual integration. Using these methods we speculate the balances of the LP and HF powers of HRV at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ tilt levels of head-up tilt table for young and healthy 24 men. R peaks are located at the highest point of QRS complex detected from modified spacial velocity algorithm. In general FFT is the most fast way to obtain PSD but PSD from FFT has too many peaks and valleies. AR PSD can show frequency of ANS activity effectively but LF component of PSD is often invisible due to interference of VLF power. The residual integration method that decomposes the AR PSD is very efficient way to extract LF component. Applying the above three methods to HRV we can visualize the trend of PSD variations along tilt levels.