• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.569-579
• /
• 2001

This study investigates the effects of operating conditions on the chattering of an automotive disk brake by experimental and computational methods. Design factors, which cause chattering in automobiles, have attracted great attentions for long time; but they are not well understood yet. For this study, we construct a brake dynamometer for measuring the disk surface temperature during chattering, and propose an efficient hybrid algorithm (combining FFT-FEA and traditional FEA program) for analyzing the thermo-elastic behavior of three-dimensional brake system. We successfully measure the judder in a brake system via the dynamometer and efficiently simulate the contact pressure variation by the hybrid algorithm. The three-dimensional simulation of thermo-mechanical interactions on the automotive brake, showing the transient thermo-elastic instability phenomenon, is presented for the first time in this academic community. We also find from the experimental study that the disk bulk temperature strongly influences the brake chattering in the automotive disk brakes.

• 패션비즈니스
• /
• 제12권4호
• /
• pp.131-142
• /
• 2008

One of the major fashion trends is the naturalism and ecology-conscious trend. The natural looks required in the trend require somewhat random distribution of yarn linear density, which results in irregular appearance along the yarn. This is a technically challenging work of producing yarns that look natural far from being artificial yet maintaining the intricately aesthetic randomness without causing process disturbances. This study focused on the characteristics of fabrics made of natural cellulosic fibers including hemp, ramie, flax, and polyester fabrics. Image analysis of the fabric samples included area measurement of yarn specimen, FFT and inverse FFT. Measurements of bending resistance, thickness, air permeability, and weight were also implemented to interpret the structural differences.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권2호
• /
• pp.60-64
• /
• 2001

The degradation process of silicone rubber was investigated by leakage current monitoring in Inclined-Plane method. DAS (Data Acquisition System) with 12-bit, 8-channel A/D converter was prepared. Average current, cumulative charge, current waveform and the number of peak pulses were measured on-line. And, FFT (Fast Fourier Transform) analysis was performed with stored current waveform. Besides, maximum erosion depth was measured in order to use as the indicator of the degradation process. So, the results of leakage current components and maximum erosion depth measurements were compared to find one or more components which have trends of changing similarly to that of erosion process. The result suggests that the ratio of peak current to r.m.s. current, harmonic contents and the number of peak pulses are well corresponding with the degradation process.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.107-111
• /
• 1999

We developed the experimental function (ERF) which can be used for the numerical curve fitting analysis in photoelectron spectroscopy (PES). We selected the core-levels of Ag 3d5/2 and Au 4f7/2 to obtain the ERF from the measured core-level spectra. For the numerical fourier transformation we applied the fast transform (FFT) algorithm. we considered optical (Wiener) filtering with the FFT due to noise and used Hann window function to remedy the information leakage in frequency domain due to discrete and finite sampling of measurement. The comparison of the curve fitting results using the ERF obtained in this work and the mathematical response function with a gaussian in the conventional approach shows clearly the improvement of the curve fitting analysis.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.570-575
• /
• 2011

Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each parts' shape, length and mass can affect driving frequency and vibration mode. This paper analyzed Cu sheet deposition characteristics using ultrasonic metal welder and tension tester. A horn suitable for 40,000Hz was attached to the ultrasonic metal welder in order to weld Cu plates. The Cu sheet welding was done with different amplitude, pressure, and welding time, and its maximum tension was measured with tension tester. Maximum tension of 153.87N was obtained when the pressure was 2.0bar, amplitude was 80%, and welding time was 0.30s. Therefore, excessive welding condition negatively influences maximum tension measurement result.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.430-435
• /
• 1992

This paper presents a real-time algorithm for an infrared seeker to find the real target automatically against various background noises without changing the reticle configuration. The modeling technique of infrared sources and analysis results of the various source types based on the FFT algorithm are included. Futhermore, a neural network is used to recognize the source type using the results of FFT analysis. The evaluation of target recognition for cases which can happen in real situation is also treated.

• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.7-12
• /
• 2005

This paper presents several time series methods to analyze the chatter mechanics by using the power spectrum of these algorithms considering the cutting dynamics. In this study, several time series models such as AR(burg, forwardbackward, geometric lattice, instrument variable, least square, Yule Walker), ARX(1s, iv4), ARMAX, ARMA, Box Jenkins, Output Error were modeled and compared with one another. Finally, it was proven that time series modelings are also a desirable and reliable algorithm than the other conventional methods(FFT) for the calculation of the chatter mode in turning operation. Also, the spectrum of times series methods is a little bit more powerful than the FFT fer the detection of a high noisy and weak chatter mode. The radial cutting force Fy has been used for spectrum and chatter stability lobe analysis in this study.

• 한국소음진동공학회논문집
• /
• 제12권8호
• /
• pp.589-597
• /
• 2002

주행중인 차량의 동적 거동에 대한 응답을 해석하기 위하여 시간영역에서 뿐만 아니라 주파수 영역에서의 해석이 필요하다. 주파수 영역에서의 해석을 위하여 시간영역에서의 값을 FFT를 이용하여 주파수 영역으로 변화하는 방법이 일반적으로 사용되어 왔다. 본 연구에서는 최대 엔트로피 방법을 이용하여 기존의 FFT 방법보다 차량의 과도응답특성을 시간영역 및 주파수 영역에서 편리하게 해석할 수 있는 방법을 제시하고 있다.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권8호
• /
• pp.351-358
• /
• 2001

This paper deals with the PSS modeling of Ulchin N/P #1 as well as the generator and excitation system modeling by utilizing the recorded data from AVR step test, which has been performed by entering small voltage signal into the AVR summing point. In addition to it. two recorded results obtained from the AVR step test with PSS sunning and without PSS running have not only been compared each other on the time domain, but also they heve been analyzed with FFT analysis on the frequency domain; thus, the desirable effects of running PSS in Ulchin N/P #1 on power system have been explicitly confirmed. Finally, the derived PSS model parameters lead to good matches between simulation results and recorded data.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.982-991
• /
• 2012

In this study, a new method has been presented for the detection of broken rotor bar (BRB) faults in inverter driven induction motors controlled via Field Oriented Control (FOC). To this end, a FOC controlled induction motor with a BRB fault was modeled using the Matlab/Simulink program. Experiments were carried out using the prepared simulation model at various loads and operating speeds. The motor current and speeds were monitored for healthy, 1, 2 and 3 BRB faults. The Resampling Based Order Tracking Analysis (RB-OTA) method was applied to the monitored signals. The obtained results were compared by using the classic Fast Fourier Transform (FFT) method. When the obtained results were analyzed via the FFT method no information regarding any faults was determined in the run up or run down regions of the motor and the presented method gave very good results. The reliability of the proposed method was validated with experimental results. The main innovative part of this study is that the RB-OTA method was implemented on the induction motor current signal for detecting BRB faults.