• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1234-1240
• /
• 2004

We studied on the electro-optic characteristics and dynamic stability according to an undesirably defined pretilt angle induced in high step coverage of pixel area for the Twisted Nematic (TN) / Fringe-Field Switching (FFS) mode. In case of the TN mode, LC directors twist reversely near the edges of thin-film-transistor and black matrix where the pretilt angle of the LC is not well defined. Therefore, the voltage-dependent dynamics of the LC in TN mode is unstable and shows the bad electro-optic characteristics. On the other hand, in case of the FFS mode, the LCs are twisted parallel to the bottom substrate by fringe electric field and the electro-optic characteristic is not influenced by the pretilt angle of the LC which is not well defined.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.633-640
• /
• 2004

We have studied color tracking of a fringe-field driven homogenously aligned nematic liquid crystal (LC) cell with negative dielectric anisotropy and compared it with other devices such as the twisted nematic(TN) and in-plane switching(IPS) modes. According to studies, the TN device shows bluish color at grey scale and even at a low retardation cell it cannot avoid color tracking. The authentic IPS device having cell retardation value of 0.23 ${\mu}{\textrm}{m}$ also shows bluish white color. However, the FFS device shows excellent color tracking characteristics even at high retardation value of the cell while keeping high transmittance and greenish white.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1054-1057
• /
• 2003

We have studied $90^{\circ}$ twisted nematic (TN) mode driven by fringe electric field, where two polarizers are parallel each other such that the cell shows a black state before a voltage is applied. According to the studies by computer simulation for a LC with negative dielectric anisotropy, the LC twists perpendicular to the horizontal field direction of fringe electric field and the degree of tilt angle is very low, when a voltage is applied. Therefore, the new device exhibits wide viewing angle characteristic due to in-plane switching and high transmittance since the LC director aligns parallel to the polarizer axis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.186-186
• /
• 2009

Most liquid crystal display modes, including the twisted nematic (TN) $mode^1$, the in-plane switching (IPS) $mode^2$, the fringe field switching (FFS) $mode^3$, and the vertically aligned (VA) $mode^4$ are based on either a horizontal or a vertical alignment. However, for some applications, such as no-bias-bend (NBB) pi cell or bistable bend-splay display, an intermediate pretilt angle is essential$^5$. NBB pi cells have been a focus of interest because of their fast response time; however, the reliable control of the intermediate pretilt angle of liquid crystals that is required for the fabrication of NBB pi cells is challenging. The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method. Various pretilt angles in the range from 0^{\circ}$ to 90^{\circ}$ were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-treated blended polyimide layer. A NBB pi cell with an intermediate pretilt angle of 47.8^{\circ}$ was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption. In addition, the response time of the NBB pi cell was rapid.