• 한국재난정보학회 논문집
• /
• 제12권1호
• /
• pp.1-9
• /
• 2016

국부적인 두께감소 문제에 대하여 직관부위를 대상으로 한 건전성 평가는 잘 알려져 있으나 엘보우를 대상으로 한 건전성 평가는 최근에 원자력 분야에서는 많은 연구가 이루어지고 있으나 석유화학 플랜트에서 이용되는 건전성 평가 지침서 중 하나인 API579 코드에는 아직 없는 실정이다. 이에 본 연구에서는 엘보우를 대상으로 엘보우의 외부(extrados)와 내부(intrados)에 두께 감소가 있다고 가정한 후 유한요소해석법을 이용하여 두께감소된 엘부우의 건전성평가 해석을 수행하였다. 본 해석 결과는 석유화학 플랜트에서 이용되는 엘보우의 건전성 평가에 이용될 수 있음을 보여주었다.

• Reproductive and Developmental Biology
• /
• 제35권1호
• /
• pp.67-75
• /
• 2011

The faulty regulation of imprinting gene lead to the abnormal development of reconstructed embryo after nuclear transfer. However, the correlation between the imprinting status of donor cell and preimplantation stage of embryo development is not yet clear. In this study, to determine this correlation, we used the porcine spermatogonial stem cell (pSSC) and fetal fibroblast (pFF) as donor cells. As the results, the isolated cells with laminin matrix selection strongly expressed the GFR ${\alpha}$-1 and PLZF genes of SSCs specific markers. The pSSCs were maintained to 12 passages and positive for the pluripotent marker including OCT4, SSEA1 and NANOG. The methylation analysis of H19 DMR of pSSCs revealed that the zinc finger protein binding sites CTCF3 of H19 DMRs displayed an androgenic imprinting pattern (92.7%). Also, to investigate the reprogramming potential of pSSCs as donor cell, we compared the development rate and methylation status of H19 gene between the reconstructed embryos from pFF and pSSC. This result showed no significant differences of the development rate between the pFFs ($11.2{\pm}0.8%$) and SSCs ($13.3{\pm}1.1%$). However, interestingly, while the CTCF3 methylation status of pFF-NT blastocyst was decreased (36.3%), and the CTCF3 methylation status of pSSC-NT blastocyst was maintained. Therefore, this result suggested that the genomic imprinting status of pSSCs is more effective than that of normal somatic cells for the normal development because the maintenance of imprinting pattern is very important in early embryo stage.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.34-39
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally condrcted by using S-N curves, as specified in the codeds and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02 ). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• 한국가스학회지
• /
• 제5권4호
• /
• pp.56-61
• /
• 2001

최근 여러 산업설비에서 주목받고 있는 RBI 소프트웨어는 개발한 회사에 따라 그 분석 수준, 적용분야, 반영하는 손상기구 등이 다양하다. 본 논문에서는 국내 여러 개의 기관이 공동으로 참여한 다자간 공동연구과제인, 해외 RBI 소프트웨어의 기능에 대한 조사연구에 대해 소개하였으며 연구 내용의 일부를 사례로서 보여주었다. 이 연구에서는 RBI 소프트웨어를 개발한 국외 기관별로 수집된 자료와 데모 프로그램을 동해서 기존 RBI 진단시스템의 장단점을 비교$\cdot$분석하였으며, 향후 RBI 소프트웨어를 개발하는 경우 필요한 최적기능에 대해 연구하였다.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.391-400
• /
• 2008

Multi-pulse topology of converters using elementary six-pulse GTO - VSC (gate turn off based voltage source converter) operated under fundamental frequency switching (FFS) control is widely adopted in high power rating static synchronous compensators (STATCOM). Practically, a 48-pulse ($6{\times}8$ pulse) configuration is used with the phase angle control algorithm employing proportional and integral (PI) control methodology. These kinds of controllers, for example the ${\pm}80MVAR$ compensator at Inuyama switching station, KEPCO, Japan, employs two stages of magnetics viz. intermediate transformers (as many as VSCs) and a main coupling transformer to minimize harmonics distortion in the line and to achieve a desired operational efficiency. The magnetic circuit needs altogether nine transformers of which eight are phase shifting transformers (PST) used in the intermediate stage, each rating equal to or more than one eighth of the compensator rating, and the other one is the main coupling transformer having a power rating equal to that of the compensator. In this paper, a two-level 48-pulse ${\pm}100MVAR$ STATCOM is proposed where eight, six-pulse GTO-VSC are employed and magnetics is simplified to single-stage using four transformers of which three are PSTs and the other is a normal transformer. Thus, it reduces the magnetics to half of the value needed in the commercially available compensator. By adopting the simple PI-controllers, the model is simulated in a MATLAB environment by SimPowerSystems toolbox for voltage regulation in the transmission system. The simulation results show that the THD levels in line voltage and current are well below the limiting values specified in the IEEE Std 519-1992 for harmonic control in electrical power systems. The controller performance is observed reasonably well during capacitive and inductive modes of operation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권5호
• /
• pp.718-724
• /
• 2007

Considerable attention has been focused on the cloning of mammalian embryos, as a consequence of poor development, in order to enhance the application of genetic engineering. Experiments were conducted to compare the developmental competence of parthenotes and reconstructed (NT) rabbit eggs with fetal fibroblasts (FFs) following various activation regimens. Oocytes and NT eggs were exposed to: electric stimulation (EST, Group 1) and EST followed by 6-dimethylaminopurine (DMAP, Group 2), cycloheximide (CHX, Group 3) or DMAP/CHX (Group 4). Pronuclear (PN) status, cleavage, blastocyst development and the ploidy were assessed. In parthenote groups 1, 2, 3 and 4, the PN formation differed significantly. And, the cleavage and blastocyst rates were 41.7 and 5%, 75.6 and 53.7%, 68 and 36%, 82.1 and 52.6%, respectively, among treatments. Polyploidy was observed in 17.2% of EST plus DMAP and 44.9% of EST plus DMAP/CHX groups. In SCNT groups (Group 1, 2, 3 and 4), the cleavage and blastocyst rates were 28.6 and 7.1%, 58.3 and 29.2%, 56.8 and 24.1%, 64.5 and 27.8%, respectively. The chromosomal composition differed significantly (p<0.05) among treatments. In Group 2 and 3, 53.8% and 81.8% of embryos revealed diploid chromosomal sets, respectively. However, in Group 4, 53.3% of embryos showed abnormal ploidy (mixoploid). Although DMAP or combination with DMAP/CHX resulted in higher in vitro development of rabbit SCNT embryos, higher incidence of chromosomal abnormality may induce problems related to fetal loss of at late stage of development.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.69-74
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves, as specified in the codes and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• 가정과삶의질연구
• /
• 제32권3호
• /
• pp.115-135
• /
• 2014

The purpose of this study was to develop a "Family Play Therapy Program" using puppets to decrease attachment problems for families with children having attachment problems and to examine its effectiveness. The participants were an experimental group of 16 individuals(8 children with attachment problems whose ages ranged from 4 to 5 and 8 mothers) and a control group of 16 individuals (8 children with attachment problems whose ages ranged from 4 to 5 and 8 mothers). The experimental group was treated through the Family Play Therapy Program, which involved the use of puppets and was held for twelve sessions twice a week. The changes in the participants were measured in order to examine the effects of the program. The researcher measured children's emotional and behavioral expression(TBP), the mothers' sense of self(Self-Differentiation Scale), personal relationships(ECR-R), and the perception of family functions(ICPS-FFS) both before and after the FPT program and compared their differences. The MIM Rating Scale and Marschak Behavior Rating Scale were administered to examine the interactions between mothers and children, and 1:1 interviews were also conducted. The data thus gathered were used for non-parametric analysis(Mann-Whitney U test and Wilcoxon rank sum test)using SPSS WIN 17.0. The results of this study were as follows: First, the program had a positive effect on children's emotional expression. After the problem were over, negative emotional and behavioral expression in the experimental group decreased. Second, the program had a positive effect on mothers' self-differentiation and personal relationships. Third, the program had a positive effect on changes in the interaction behaviors between the mother and child. Fourth, the program had a partially positive effect on the responses from their group developmental stages, especially on the subscale of both a program for the reinforcement of mothers' emotions and family play program utilizing puppets.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.680-689
• /
• 2010

The crack-tip stress fields and fracture mechanics assessment parameters for a surface crack, such as the elastic stress intensity factor or the elastic-plastic J-integral, can be affected significantly by the adjacent cracks. Such a crack interaction effect due to multiple cracks can alter the fracture mechanics assessment parameters significantly. There are many factors to be considered, for instance the relative distance between adjacent cracks, the crack shape, and the loading condition, to quantify the crack interaction effect on the fracture mechanics assessment parameters. Thus, the current assessment codes on crack interaction effects (crack combination rules), including ASME Sec. XI, BS7910, British Energy R6 and API 579-1/ASME FFS-1, provide different rules for combining multiple surface cracks into a single surface crack. The present paper investigates crack interaction effects by evaluating the elastic stress intensity factor and the elastic-plastic J-integral of adjacent in-plane surface cracks in a plate through detailed 3-dimensional elastic and elastic-plastic finite element analyses. The effects on the fracture mechanics assessment parameters of the geometric parameters, the relative distance between two cracks, and the crack shape are investigated systematically. As for the loading condition, an axial tension is considered. Based on the finite element results, the acceptability of the crack combination rules provided in the existing guidance was investigated, and the relevant recommendations on a crack interaction for in-plane surface cracks are discussed. The present results can be used to develop more concrete guidance on crack interaction effects for crack shape characterization to evaluate the integrity of defective components.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.163-171
• /
• 2022

Objectives: Fit performance may vary depending on the ambient aerosol number and ratio in respective test environment. Although several instrument can measure it, they differ with respect to the measurement principle and the range of ambient aerosols collected to calculate the fit factor. Methods: In this study, the fit performance between a condensation nuclei counter(CNC) and an optical particle counter(OPC) was compared according to ambient aerosol number concentration, and evaluated consistency. One type respirators(N95 masks) was worn by 50 participants PortaCount®(Pro+ 8038) and MT®(05U) were connected with one probe to one mask, and Fit Factors(FFs) were measured simultaneously. Results: The interclass correlation coefficient of the fit factor and ambient aerosol number, as measured by the two instrument, was 0.82 and 0.79, respectively, indicating a high consistency level. On the other hand there was a significant correlation between the successful test performance of the OPC instrument and the ambient aerosol number. Conclusions: The test was passed with the CNC and OPC instruments when the ambient aerosol number was 635-3,332 particles/cm³ and 368-1,976 particles/cm³, respectively. Thus, the ideal ambient aerosol number of particles differed between the two instrument.