• Magazine of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.73-77
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1833-1837
• /
• 2004

The two-inertia system, which has the torsion vibration, is typically found in several industrial applications. This torsion vibration will effect the quality of the rolled material as well as the stability of the drive system. Thus the speed and torsion vibration of the system have to be properly controlled. This paper, I-PDA controller designed by Coefficient Diagram Method to control a two-inertia system is proposed. The experimental result shows that both of transient and steady state specification can be fulfilled but the transient response still has long rise time. In order to improve the speed of the system response, a phase lag structure of feedforward controller is introduced to I-PDA control system. It is shown that the performance of the I-PDA control system with suitable FFC has shorter rise and settling times, no overshoot and the torsion vibration can be suppressed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.416-420
• /
• 2008

In EMAT field, spiral RF coils are much more widely used when compared with solenoid coils. In the field of the magnetostrictive strip transducers for long range ultrasonic testing of cylindrical structures, however, solenoid coils has been used. This seems to be attributed to the difficulty in fabricating low frequency (i.e., large size) spiral coils. In this paper, we describe a method for fabricating spiral coil magnetostrictive strip guided wave transducers from FFC (flexible flat cable). It is demonstrated through a comparison experiment that the spiral coil transducer has much superior performance (sensitivity, SNR, and guided wave direction control capability) than the previous transducer with solenoid coils.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.491-501
• /
• 2008

In order to describe runoff characteristics of urban drainage area, outflow from subbasins divided by considering topography and flow path, is analyzed through stormwater system. In doing so, concentration time and time-area curve change significantly according to basin shape, and runoff characteristics are changed greatly by these attributes. Therefore, in this development study of FFC2Q model by MLTM, we aim to improve the accuracy in analyzing runoff by adding a module that considers basin shape, giving it an advantage over popular urban hydrology models, such as SWMM and ILLUDAS, that can not account for geometric shape of a basin due to their assumptions of unit subbasin as having a simple rectangular form. For subbasin shapes, symmetry types (rectangular, ellipse, lozenge), divergent types (triangle, trapezoid), and convergent types (inverted triangle, inverted trapezoid) have been analyzed in application of time-area curve for surface runoff analysis. As a result, we found that runoff characteristic can be quite different depending on basin shape. For example, when Gunja basin was represented by lozenge shape, the best results for peak flow discharge and overall shape of runoff hydrograph were achieved in comparison to observed data. Additionally, in case of considering subbasin shape, the number of division of drainage basin did not affect peak flow magnitude and gave stable results close to observed data. However, in case of representing the shape of subbasins by traditional rectangular approximation, the division number had sensitive effects on the analysis results.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.825-833
• /
• 2013

In this study, the dyeing properties of Phellodendron amurense on cotton and silk fabrics were evaluated to establish a scientific database of dyeing methods using natural dyes with the ultimate aim of facilitating the practical use of these dyes. The optimal thickener and dyeing concentrations depending on the thickener type were identified when dyeing with P. amurense, and the fabric color, color fastness, and antibiosis were examined for various thickeners, fabrics, and mordants. The results were as follows.: The optimal concentrations of thickeners when dyeing on cotton and silk fabrics were CMC 3% (w/w), Mayprogum 7% (w/w), and Indalka 9% (w/w). The optimal concentration of P. amurense was 25% (w/w), irrespective of the type of thickener. To maintain the hue unique to P. amurense, thickening with Mayprogum or Indalka and mordanting with Al was effective for cotton, while thickening with Mayprogum or Indalka and mordanting with Al or thickening with CMC and mordanting with gallnut was effective for silk. The dry-cleaning fastness and abrasion resistance of cotton fabrics dyed with P. amurense were excellent at the 4-5 level. Gallnut was effective for washing fastness and perspiration fastness against color degradation, and FFC was effective for light fastness. The washing fastness, dry-cleaning fastness, abrasion resistance, and perspiration fastness of silk fabrics dyed with P. amurense were excellent at level 4, except for washing and perspiration fastness, and FFC was effective for the improvement of light fastness. Dyeing cotton and silk fabrics with P. amurense thus yielded antibiosis and excellent washing fastness.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.115-126
• /
• 2016

In this study, computational fluid dynamics (CFD) analysis was conducted to investigate the flow pattern and to find the occurrence of dead zones in an existing capacitive deionization (CDI) cell. Newly designed cells-specifically designed to avoid dead zones-were analyzed by CFD in accordance with the flow rates of 15, 25 and 35 ml/min. Next, the separation performances between the existing and newly designed cell were compared by conducting CDI experiments in terms of salt removal efficiency at the same flow rates. Then, the computational and experimental results were compared to each other. The salt removal efficiencies of the hexagon flow channel 1 (HFC1) and hexagon flow channel 2 (HFC2) were increased 88-124% at 15 ml/min and 49-50% at 25 ml/min, respectively. There was no difference between the existing cell and the foursquare flow cell (FFC) at 35 ml/min.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.4
• /
• pp.382-388
• /
• 2019

Streptococcosis caused by Streptococcus parauberis is a very important disease in farmed olive flounder Paralichthys olivaceus. For most fish pathogens, including S. parauberis, there are no analytical criteria to distinguish antibioticsusceptible strains from antibiotic-resistant strains. In this study, epidemiological cut-off ($CO_{WT}$) values were generated to classify 75 strains of S. parauberis isolated from 1999 to 2018 as wild type (WT) and non-wild type (NWT) using disc diffusion data and normalized resistance interpretation (NRI) analysis. The susceptibility of the isolates to 16 antibiotics was evaluated using CLSI guideline M42-A. The wild-type cut-off values for amoxicillin, erythromycin, oxytetracycline, and florfenicol for S. parauberis were ${\geq}35$, 31, 28, and 27 mm, respectively. The NWT ratios of S. parauberis strains to treatment with GEN, FFC, ENR, SXT, EFT, VAN, and CHL were 17% or less, indicating that these antibiotics may be used to treat streptococcosis caused by S. parauberis. For recent S. parauberis isolates, the NWT ratios for AMX, ERY, OTC and FFC are much higher than for strains isolated from 1999-2007. The $CO_{WT}$ data from this study will assist aquatic animal disease professionals in prescribing appropriate antibiotics for the treatment of streptococcosis caused by S. parauberis, which will help reduce the misuse and abuse of antibiotics in the aquaculture sector.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.103-110
• /
• 2024

In this study, a nonlinear dynamic analysis of a frame and single member, which reflect the characteristics of a plant facility, is performed using the commercial MIDAS GEN program and the results are analyzed. The general structural members and material properties of the plant are considered. The Newmark average-acceleration numerical-analysis method is applied to a plastic hinge to study material nonlinearity. The blast load of a vapor-cloud explosion, a representative plant explosion, is calculated, and nonlinear dynamic analysis is conducted on a frame and single member. The observed dynamic behavior is organized according to the ratio of natural period to load duration, maximum displacement, ductility, and rotation angle. The conditions and range under which the frame functions as a single member are analyzed and derived. NSFF with a beam-column stiffness ratio of 0.5 and ductility of 2.0 or more can be simplified and analyzed as FFC, whereas NSPF with a beam-column stiffness ratio of 0.5 and ductility of 1.5 or more can be simplified and analyzed as FPC. The results of this study can serve as guidelines for the blast-resistant design of plant facilities.

• Journal of Information Technology Services
• /
• v.22 no.5
• /
• pp.17-30
• /
• 2023

A company's sustainable growth is a very important goal, and for this purpose, the company's business model is changing into a convergence of products and services. The purpose of PS-Offering is to maintain a long-term relationship with customers, and customer experience management is necessary for this. This study presents a service design methodology that can support customer experience management of the PS-Offering business model. The experience management portfolio analysis methodology consists of four steps: 1. Deriving service encounter through customer journey maps; 2. Identify the service structure of each service encounter in three forms (FFC, FSC, FSE). 3. Analyze the customer's emotional variables, that is, customer experience, at each service encounter, Finally, 4. After plotting the level of customer experience at the service encounter, the analysis is conducted with a customer experience management portfolio that seeks future strategic plans for this. The methodology presented in this study will help in the service design of the service encounter unit centered on customer experience. And it will improve the financial performance of the company by raising the service level of the business model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.324-334
• /
• 2012

In this research, the dyeing properties of $Lycopus$ $lucidus$ Turcz on cotton and silk fabrics were evaluated to establish a scientific database of natural dyes. The optimum dyeing conditions were identified with K/S values depending on the dyeing concentration, temperature, time, and pH. For the optimum conditions, the color changes for different synthetic mordants were observed as L, $a^*$, $b^*$ and H, V, C. The color fastness after dyeing and mordanting was also examined. Additionally, the antibiosis of $Lycopus$ $lucidus$ Turcz was examined. The results were as follows: For the cotton, the optimized dyeing conditions were 300% (o.w.f.), $50^{\circ}C$, 40 min., and pH 5. For the silk fabric, the conditions were 450% (o.w.f.), $70^{\circ}C$, 60 min., and pH 4. The K/S value of dyed cotton improved about 1.03-2.78 folds after mordanting. The fabric color was yellow in the absence of mordanting, while it was reddish yellow after post-mordanting with FFC. Although the color changed with the mordanting method and mordant, the overall hue was yellow. Thus, $Lycopus$ $lucidus$ Turcz appears to have the potential for use as a natural dyeing material for a yellow hue. The K/S value of the dyed silk fabric improved about 1.05-1.40 folds after mordanting. The fabric showed a reddish yellow color when pre-mordanted with Al and Cu. The washing and dry-cleaning fastness of the cotton and silk fabrics were at the 4-5 level. The light fastness of the cotton improved after mordanting; however, pre-mordanting was more effective than post-mordanting or the absence of mordanting. The dyed cotton, silk fabrics showed excellent antibiosis.