• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.163-165
• /
• 1996

In the PIC simulation of plasma, the fields are commonly calculated on uniform spatial grids using FDM. But, FDM has a difficulty in modeling a complex shaped model. FEM has a good flexibiblity in treating a complex shape, so that we calculated the field by using FEM not FDM. In this paper, the plasma between plane-to-plane electrodes was simulated using FEM and FDM. Comparing the results of those two methods told us that FEM is also valid as a calculating method in PIC plasma simulation. In order to verify the use of FEM, the discharge of rod-to-plane was simulated. There was not a little distortion of the electric field between the electrodes due to the distribution of space charges.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.363-368
• /
• 2004

Maglev vehicles, which are levitated and propelled by electromagnets, often run on elevated guideways comprised of steel, aluminum and concrete. Therefore, an analysis of the dynamic interaction between the Maglev vehicle and the guideway is needed in the design of the critical speed, ride, controller design and weight reduction of the guideway. This study introduces a dynamic interaction simulation technique that applies FEM. The proposed method uses FEM to model the elevated guideway and the Maglev vehicle, which is different from conventional studies. Because the proposed method uses FEM, it is useful to calculate the deformation of the elevated guideway, the dynamic stress, and the motion of the vehicle. By applying the proposed method to an urban transit Maglev vehicle, UTM01, the dynamic response is simulated according to velocity increase and can be reviewed again. From the result of the study, we concluded that FEM simulation of the dynamic interaction between the maglev vehicle and the guideway is possible.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.81-87
• /
• 2017

315Fr 컴프레서용 모터가 진동 기준을 초과하는 문제가 발생하였고 이를 해결하기 위한 FEM해석과 모드실험을 수행하였다. 먼저 자유단 조건하의 해석과 실험을 수행하여 해석을 위한 조건을 확인하였다. 해석을 위한 Mesh, 재질, 경계 조건을 검토하였다. 여기서 얻은 결과를 바탕으로 볼트가 고정된 상태의 FEM 해석과 모드 실험을 수행하여 진동의 원인을 확인하였다. 모드실험 결과 121.7Hz에 Rolling 모드가 있음을 확인하였고 해석을 통해서도 동일한 결과를 얻을 수 있었다. 이 결과를 바탕으로 진동 기준을 초과하는 원인은 120Hz에 존재하는 Rolling 운동과 2X, 2fl 가진 주파수의 공진에 의한 것임을 알게 되었다. 여기서 얻은 결과를 바탕으로 추후 시리즈 설계에 있어서는 시험 모델 제작이나 실험 없이 해석만으로 문제점을 예측하고 해결할 수 있는 기술을 보유하게 되었다.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.325-332
• /
• 2005

This paper presents a study on defects in pearlite lamella structure of high carbon steel by means of finite-element method(FEM) simulation. High carbon pearlite steel wire is characterized by its nano-sized microstructure feature of alternation ferrite and cementite. FEM simulation was performed based on a suitable FE model describing the boundary conditions and the exact material behavior. Due to the lamella structure in high carbon pearlite steel wire, material plastic behavior was taken into account on deformation of ferrite and cementite. The effects of many important parameters(reduction in area, semi-die angle, lamella spacing, cementite thickness) on wire drawing process can be predicted by DEFORM-2D. It is possible to obtain the important basic data which can be guaranteed in the ductility of high carbon steel wire by using FEM simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.359-367
• /
• 2004

In this research on-line model for the prediction of the effective strain distribution in strip on finishing mill process is presented. To describe the effective strain distribution in strip, three guide points and a distribution fitting variable are used. On-line models to get these points and fitting variable non-dimensionalization method and least square method were used with FEM simulation results. The model is developed using strip only FEM simulation as reference sets and compared with roll coupled FEM simulation results as perturbed sets. The on-line model to describe effective strain distribution shows good agreement with coupled FEM analysis results.

• 소성∙가공
• /
• 제21권5호
• /
• pp.298-304
• /
• 2012

The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.473-481
• /
• 2017

This study suggests a simple, convenient and non-destructive method for investigation of the Young's modulus detection in stepped shafts which only utilizes the first-order resonant frequency in flexural mode and dimensions of structures. The method is based on the impulse excitation technique (IET) to pick up the fundamental resonant frequencies. The standard Young's modulus detection formulas for rectangular and circular cross-sections are well investigated in literatures. However, the Young's modulus of stepped shafts can not be directly detected using the formula for a beam with rectangular or circular cross-section. A response surface method (RSM) is introduced to design numerical simulation experiments to build up experimental formula to detect Young's modulus of stepped shafts. The numerical simulation performed by finite element method (FEM) to obtain enough simulation data for RSM analysis. After analysis and calculation, the relationship of flexural resonant frequencies, dimensions of stepped shafts and Young's modulus is obtained. Numerical simulations and experimental investigations show that the IET method can be used to investigate Young's modulus in stepped shafts, and the FEM simulation and RSM based IET formula proposed in this paper is applicable to calculate the Young's modulus in stepped shaft. The method can be further developed to detect mechanical parameters of more complicated structures using the combination of FEM simulation and RSM.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.373-376
• /
• 2006

The ring rolling design for a large-scale Ti-6Al-4V alloy ring was performed with a calculation method and FEM simulation. The ring rolling design includes geometry design and optimization of process variables. The calculation method was to determine geometry design such as initial billet and blank size, and final rolled ring shape. A commercial FEM code, SHAPE was used to simulate the effect of process variables in ring rolling on the distribution of the internal state variables such as strain, strain rate and temperature. In order to predict the forming defects during ring rolling, the process-map approach based on Ziegler's instability criterion was used with FEM simulation. Finally, an optimum process design to obtain sound Ti-6Al-4V rings without forming defects was suggested through combined approach of Ziegler's instability map and FEM simulation results.

• 소성∙가공
• /
• 제16권3호
• /
• pp.172-177
• /
• 2007

The process design for large-scale ring rolling of Ti-6Al-4V alloy was performed by calculation method, processing map approach and FEM simulation. The ring rolling design includes geometry design and optimization of process variables. The calculation method was used to make geometry design such as initial billet and blank sizes, and final rolled ring shape. A commercial FEM code, SHAPE-RR was used to simulate the effect of process variables in ring rolling on the distribution of the internal state variables such as strain, strain rate and temperature. In order to predict the forming defects during ring rolling and the formation of over-heating above $\beta$-transus temperature due to deformation heating, the process-map approach based on Ziegler's instability criterion was used with FEM simulation. Finally, an optimum process design to obtain sound Ti-6Al-4V rings without forming defects was suggested through combined approach of Ziegler's instability map and FEM simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.565-567
• /
• 2000

In this paper, the discharge characteristics of AC PDP, one of the leading technologies currently under development for large-area flat displays, is computed by using Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. Up to now, many simulations of AC PDP have been mainly done by Finite Difference Method(FDM). But we simulated the AC PDP by using FEM-FCT method which discretizes the region of interest with unstructured grids. FEM-FCT method can reduce the computational cost because of refining locally where the physical quantities have steep gradients and is more efficient in solving discharge problems, such as a AC PDP. Results are presented in Ne-Xe(4%) gas mixture for a gas pressure of 400 Torr and as the discharge proceeds, the space and time variations of the electron and ion densities, potential and wall charges on the dielectric are described. Results from our simulation by FEM-FCT are similar to those from simulation by FDM and are more efficient in computational cost reduction.