• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.245-245
• /
• 2003

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.318-321
• /
• 2005

In vibro-acoustic analysis, the commercial CAE tools, such as SYSNOISE, is usually used to take into account of the coupled effects of fluid acoustics and structural vibration. The acoustic field can be solved by either FEM or BEM, while the vibration field is usually solved by FEM. The interior or exterior acoustic problems with the coupled effects of the structural boundary could be solved by the commercial tools. The commercial tools, however, could not solve the problems in case that both the interior and exterior acoustic field is coupled with the structural boundary. In this paper, a realistic method based on FEM/BEM coupling scheme is presented to analyze the acoustic radiation from the internal source in a chamber to external acoustic field through elastic structural boundary. Several numerical examples are implemented to validate the developed program.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.480-485
• /
• 2006

본 논문에서는 사용자가 NURBS 곡면을 다양한 형태로 변형을 손쉽게 할 수 있는 수정된 유한요소법을 이용한 곡면 변형의 방법을 제시한다. 수정된 유한요소법은 NURBS 기저함수를 전통적 유한요소법의 형상함수를 대신하여 유한요소해석을 한다. 모델링된 객체는 NURBS 곡면으로 이루어져 있고, 각각의 세그먼트별로 나누어진 기저함수와 제어점으로 구성되어있기 때문에 번거롭게 요소와 형상함수를 따로 구하지 않아도 되며, 자체 보간 방식이므로 기존의 유한요소법에 비해 적은 요소와 절점으로 곡면을 해석 할 수 있다. NURBS 곡면 변형은 각각의 제어점에 의해 구역이 나눠지고 각 구역은 변형될 지점과 가장 가까운 제어점으로 구성된 구역의 제어점들을 변형시킬 지점과 각 제어점의 거리 비례에 따라서 제어점 들의 속도가 지정되어 변형을 완성한다. 제시된 변형 방법은 다른 변형들과 같이 초기 입력에 의해 변형이 한 순간에 진행되는 것이 아니라 점진적 변형이 일어나며, NURBS 의 특징인 전체 제어점 변형으로 인해 의도하지 않은 변형이 일어나는 것을 변형 중간에 각각의 제어점의 속도를 제어함으로써 사용자의 의도한 변형으로 빠른 시간에 완성할 수 있게 된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.74-81
• /
• 2002

Recently tube hydroforming has been widely applied to the automotive industries due to its several advantages over conventional methods. In this paper, attention is paid to comparison of an implicit and an explicit finite element method widely used for numerical simulation of a hydroforming process. For an explicit FEM, a huge amount of computational time is required because of the very small time increment to solve a quasi-static problem. Hence, when an explicit FEM is used fDr a hydroforming process, it is general to convert the real problem to a virtual problem with a different processing time and mass density by appropriate scaling factor. However it is difficult to figure out how large the scaling should be adopted enough to ignore the dynamic effects and maintain the desired accuracy. In this paper, the comparison of the results obtained from both methods focus on the accuracy of the predicted geometrical shape and the stress with various scaling factors which are applied to analyze hydroforming process of an automobile lower arm.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1870-1875
• /
• 2003

Optimization has been used in many engineering problems and must be one of the essential components during design process now. It is the process of maximizing the performance called an objective function of a system while satisfying some constraints, so finite element method is generally required in order to obtain these values during optimization. However, there are some difficulties to obtain them by means of FEM, where the changes of design variables cause the distortion and the regeneration of mesh that may result in inaccuracy and inefficiency. In order to overcome this problem, this paper proposed an alternative that the eXtended FEM introduced and developed by Ted Belytschko was applied to the optimization process because the key points of the X-FEM lie in that the discontinuity can be represented independently on the mesh by a function called in an enrichment function.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.384-390
• /
• 2005

In the numerical analysis of En (eddy current testing) using 3-dimensional FEM (finite element method), MVP (magnetic vector potential) and electric scalar potential are used as variables in conductor region. Three dimensional modeling makes number of unknowns increase, and the degree of freedom of variables also makes number of unknowns increase. Because of this reason, modified UP is used to reduce the number of unknowns. Gauge condition is enforced artificially on existing FEM formulations to insure the uniqueness of MVP. So in this paper the effects of these FEM formulation procedures on ECT are investigated and the appropriate FEM formulation is suggested for accurate ECT simulation.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.195-201
• /
• 2009

In this paper, the critical strains for pavement design were calculated from both Layered Elastic Program (LEP) and Finite Element Method (FEM) and the case studies which give similar critical responses were compared. Although FEM has been realized as a superior model, LEP is more favorable to pavement design due to its simplicity and thus, the technique to calculate the correct critical responses using LEP is significant. This study showed that KENLAYER can possibly estimate the critical responses close to ones obtained from TTIPAVE, which considers nonlinear cross-anisotropic behavior of unbound base materials, by adjusting the stress point locations.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.106-111
• /
• 1996

Electric machines such as motors which have rmving parts are designed for producing mechanical force or torque. The accurate calculations of electromagnetic force and torque are important in the design these machines. Electromagnetic force calculation method using the results of Finite Element Method(FEM) has been presented variously in 2-D problems. Typically the Maxwell's Stress Tensor method and the method of virtual work are used. The former calculates forces by integrating the surface force densities which can be expressed in terms of Maxwell Stress Tensor(MST), and the latter by differentiating the electromagnetic energy with respect to the virtual dis¬placement of rigid bodies of interest. In the problems including current source, magnetic vector potentials(MVP) have rmstly been used as unknown variables for field analysis by a numerical method; e. g. FEM. This paper, thus, introduces the two both methods using MVP in 3-D case. To verify the usefulness of presented methods, a solenoid model is chosen and analyzed by 3-D and axisymmetric FEM. It is found that the force calculation results are in good agreement for several mesh schemes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.85-89
• /
• 2005

For the analysis of a vibrating two dimensional structure such as the simply supported rectangular plate, Spectral Finite Element Method (SFEM) has been studied. Under the condition that two parallel edges are simply supported at least and the other two edges can be arbitrary, Spectral Finite Element has been developed. Using this element SFEM is applied to the vibrating rectangular plate which all edges are simply supported, and obtain the frequency response function in frequency domain and the dynamic response in time domain. To evaluate these results normal mode method and finite element method (FEM) are also accomplished and compared. It is seen that SFEM is more powerful analysis tool than FEM in high frequency range.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2009

This paper presents a comparative study of reinforced soil slope by using LEM and SSR-FEM. Current analysis methods for reinforced soil wall are based on LEM. SSR-FEM assumes a reduction of soil strength by a factor to reach a critical state prior to failure based on continuum mechanics. In this study the comparisons are concerned with the factor of safety and the potential failure surface in reinforced soil wall. We investigated the stability of the reinforced soil wall with a slope of $60^{\circ}$ by LEM and SSR-FEM. The comparisons indicated good performance of the SSR-FEM on stability analysis of reinforce soil wall.