이 연구는 내신성적이 우수함에도 불구하고 수능성적이 저조한 학생들이 문제 해결과정에서 나타내는 특성과 수학불안 요인을 분석하는데 있다. 연구의 대상은 인천시 5고등학교 자연계열 2학년 학생 중 내신성적이 상위 10%안에 드나 수능성적(모의수능성적)은 그렇지 못한 학생 5명이고, 이들의 수학적 성향, 수학 성취도, 개인별 특성 등에 대한 사전 면담자료, 문제풀이과정에 대한 사후 심층면담자료, 현장노트, 수학불안검사를 바탕으로 그들의 특성과 수학불안 요인을 분석한 결과는 다음과 같다. (1) 내신성적은 좋으나 수능성적이 저조한 학생들의 수학 문제 해결 과정에서 나타나는 특성은 수학전 영역에서의 개념부족, 공식암기 부족 등으로 인하여 문제풀이계획을 세우지 못하거나 설사 문제를 푼다고 해도 계산 실수, 착각, 부주의 등으로 인해 정확한 답을 구하지 못하는 것으로 나타났다. (2) 내신성적은 좋으나 수능성적이 저조한 학생들은 어느 정도의 수학 불안은 가지고 있었다. 불안의 요인은 개념부족, 응용력 부족 등 개인적 인지능력에 의한 저조한 수학 성취수준과 수학 공부시간 부족, 풀이시간 부족 등의 환경적 요인에 때문인 것으로 밝혀졌다. 특히 수학개념이 부족한 학생일수록 수학불안 현상이 심하게 나타났다. 따라서 이들 학생들의 수학 문제풀이 과정 중에 나타나는 계산 실수, 부주의, 착각은 그들의 수학 자신감에 많은 악영향을 미치게 되므로, 교사가 이를 그냥 방관할 것이 아니라 적극적으로 확인하고 지도해줄 필요가 있다. 또 교실 수업에서도 수능시험에서 다루고 있는 수학 내적, 외적 문제해결문제, 추론문제, 응용문제, 통합문제에 대한 문제풀이 경험을 하게하여 수학불안을 해소해줄 필요가 있다.)값을 보였으나, 10,000Hz의 높은 측정주파수에서는 더 큰 $E_a$값을 나타냄으로서 반응온도변화에 민감함을 보여주었다.원으로부터 부유물을 증가로 사료되었으며, 이에 대한 대책마련이 시급한 것으로 사료되었다. 수질이 휴양용수로서 사용하는 데에 적합하도록 충분한 차집시설과 환경 기초시설의 설치 운영이 필요할 것으로 판단된다.TEX>$K_s$값이 높고 $V_m/K_s$비율은 낮아 수게에서 질소가 저농도 일 때에는 다른 미세조류와 비교하면 경쟁력이 떨어지고 질소에 대한 기질 친화력은 약한 것으로 나타났다. 낙동강 하류지역에서 M. aeruginosa가 대발생하는 시기에 수중 영양염의 농도 변동은 M. aeruginosa의 영양생리 kinetics 특성과 잘 부합하는 것으로 나타났다.부분을 보완하기 위한 연구가 이루어져야 할 것으로 보인다. 연마방법 간에 상호 연관성이 없었다. FE-SEM관찰에서 레진전색제를 적용한 후의 표면은 모든 군에서 대체적으로 평활한 표면을 나타내었다. 4. 동일한 복합레진과 연마방법으로 처리된 군에서 레진전색제 적용 전과 후의 표면조도 값은 M1B군이 M1군보다, S1B군이 S1군보다 통계학적으로 높게 나타났으며, M4B군과 M5B군은 각각 M4군과 M5군 보다. 그리고 S5B군은 S5군 보다 통계학적으로 낮게 나타났다 (p<0.05). 본 연구를 종합하여 보면, 복합레진의 종류에 따라 표면조도의 순서는 다르게 나타났고, polyester strip 하에서 복합레진이 중합된 경우 가장 낮은 표면조도 값과 평활한 표면을 제공하였으며 전반적으로 anishing bur는 가장 높은 Ra값과 거친 표면을 제공하였다.
Titanium and its alloys are widely used as implants in orthopedics, dentistry and cardiology due to their outstanding properties, such as high strength, high level of hemocompatibility and enhanced biocompatibility. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The aim of this study is to research Si and Mg doped hydroxyapatite film formation by plasma electrolytic oxidation. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. A Si and Mg coating was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.
Commercially pure titanium (CP Ti) and Ti-6Al-4V alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Manganese(Mn) plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Radio frequency(RF) magnetron sputtering in the various PVD methods has high deposition rates, high-purity films, extremely high adhesion of films, and excellent uniform layers for depositing a wide range of materials, including metals, alloys and ceramics like a hydroxyapatite. The aim of this study is to research the Mn coatings on the micro-pore formed Ti-29Nb-xHf alloys by RF-magnetron sputtering for dental applications. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. Mn coatings was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Mn coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.
Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.
본 연구에서는 철(Fe)을 촉매금속으로 사용하고 마이크로웨이브 플라즈마 화학기상증착법(microwave plasma CVD)을 이용하여 얇은 다중벽 탄소나노튜브를 합성하였다. 촉매금속으로 사용된 철은 직류 마그네트론 스퍼터를 사용하여 증착하였으며, 탄소나노튜브의 합성에는 플라즈마 공급원인 수소($H_2$), 탄소 공급원인 메탄($CH_4$)과 함께 미량의 산소($O_2$) 또는 아르곤(Ar)과 함께 물을 수증기의 형태로 사용하였다. 산소 또는 수증기의 추가에 따른 탄소나노튜브의 성장률의 변화를 주사전자현미경으로 조사하였으며, 결정구조를 투과전자 현미경을 통해 관찰하였다. 또한 라만 분광법을 이용하여 추가 주입 기체의 종류에 따른 탄소나노튜브의 결정성의 변화를 분석하였다. 실험결과, 산소를 추가로 주입하였을 때 성장률이 가장 컸고 결정성도 개선되는 것을 확인하였다. 최종적으로 150 분 동안 합성하여 기판 위에 2.7 mm 이상의 수직 정렬된 얇은 다중벽 탄소나노튜브(thin-multiwalled CNTs)를 합성할 수 있었다.
General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.
본 연구에서는 난용성 약물인 5'-NIO의 가용화를 위해 초임계 유체 ASES 공정을 이용하여 PVP K-30과의 고체분산체를 제조하고 첨가제인 P188의 영향에 대해 고찰하였다. FE-SEM을 이용하여 초임계 유체 공정으로 제조된 고체분산체 미립자의 형상을 분석한 결과 100-200 nm 크기의 나노입자들이 응집된 형태를 나타내었으며, P188의 함량이 증가함에 따라 입자간의 응집이 증가하여 덩어리 형태로 전환되는 것을 확인할 수 있었다. XRD 분석 결과 5'-NIO 결정피크가 사라진 것을 확인하였으며, 이는 5'-NIO가 고분자 매질내에 분자 또는 나노 크기 수준으로 분산되었음을 의미한다. 또한 FT-IR 분석 결과 5'-NIO와 PVP K-30간에 수소결합과 같은 상호작용이 존재함을 학인할 수 있었다. 5'-NIO/PVP K-30 2성분계 고체분산체에 비이온성 계면활성제를 첨가한 경우 용출률이 현저히 향상되었으나, P188의 함량이 매우 큰 경우에는 오히려 용출률이 감소한 다는 것을 확인하였다. 본 연구를 통해 초임계 유체 공정이 기존의 고체분산체 제조 방법을 충분히 대체할 수 있다는 가능성을 확인할 수 있었다.
열전재료는 열전현상을 가지고 있어 열전발전과 열선냉각이 가능하기 때분에 해저용, 우주용, 군사용의 특수 전원으로 이미 실용화되어있고, 반도체, 레이저 다이오드, 적외선 검출소자 등의 냉각기로 쓰여지고 있어 많은 연구자들이 이들 재료에 대한 연구에 관을 갖고 열전특성을 향상시키기 위하여 많은 연구를 진행하고 있다 이들 열전재료는 사용 온도구역에 따라 3종류로 구분하고 있으며, 실온부근의 저온 영역(20$0^{\circ}C$)이하에서는 $Bi_2Te_3$계 재료, 중온영역(20$0^{\circ}C$~50$0^{\circ}C$)에서sms (Pb,Ge) Te계 재료, 고온영역(50$0^{\circ}C$~lOoo$^{\circ}C$)에서는 Si-Ge계 Fe Si계 재료가 이용되고 있다. 본 연구에서는 실온에서 성능지수가 높은 Bi_2(Te,Se)_3$에 대한 연구를 진행하였다. Bi_2(Te,Se)_3$계 열전재료는 기존의 공법인 Zone melting법을 이용하는 경우 성능지수가 높으나, 단위정이 Rhombohedral 구조파 기저면(basal plane)에 벽개성이 있는 관계로 재료의 적지 않은 손실과 가공상의 어려움이 있다. 또한 사료전체에 걸쳐 화학적으로 균질한 고용체를 얻는 것도 어려운 문제점으보 부각되고 있디 따라서 이와같은 문제점을 보완하기 위하여 용질원자의 편석감소, 고용도의 증가, 균일 고용체 형성, 결정립의 미세화등의 장점이 있는 급속응고법을 본 연구에 응용하였다. 본 연구에서는 위에서와 같은 급속응고의 장점과 대량 가공이 능늪한 연간압출공정을 이용하여 제조된 분말을 성형화 하였다. 특히 열간압출 가공에 있어서 압축다이 각 변화는 재료의 소성유동에 매우 중요한 역하을 하게되며, 이와 갇은 소성유동은 본 재료의 열전특성에 중요한 영향을 미치는 C 면 배양에 중요한 역할을 한 것으 로 기대된다. 이에 본 연구에서는 압출다이 각도 변화에 따른 미세조직변화와 이들 조직이 강도와 열전특성에 미치는 영향을 석하고자 한다. 압출재의 미세조직은 XRD(X Ray Diffraction), SEM(Scanning Electron Microscopy)으로 분석하였으며, 열전특성인 Seebeck계수($\alpha$)와 전기비저항( $\rho$ )은 열전측정장치로, 기계적 강도는 MTS장비를 이용하여 이루어졌다. 또한 압축다이각도 변화에 따른 결정방위 해석은 모노크로미터가 장착된 X RD장비감 이용하여 분석되었다.
연구는 부산 오륜대 한국순교자박물관에 소장되어있는 "국긔복소션"과 "법복졀복"의 직의(織衣) 즉, 표지직물 및 이를 보관하는 첩갑을 구성하고 있는 직물에 관한 분석적 연구이다. 본 유물은 조선 제24대 왕인 헌종(재위 1834~1849)의 후궁인 경빈 김씨(1831-1907)가 작성한 것으로 추정된다. 첩갑과 2권의 필첩의 표지는 모두 적외분광 분석 결과, 견직물에 의해 배첩이 되어있으며 첩갑의 표지는 화문직은단(花紋織銀緞)으로 되어있고 두 필첩의 겉표지는 초록색과 적색의 수자편복문단이다. 첩갑의 금속사 부분은 에너지분산형 분광분석으로 분석한 결과 은이 산화한 것임을 확인할 수 있었다. 한편 염료분석 결과, 적색인 "법복졀복"의 표지직물에서는 berberine, brazilin, carthamin 등이 검출되어 황벽, 소목, 홍화 등에 의해 복합염색이 된 것으로 추정되며 첩갑의 색사들을 분석한 결과에서는 첩갑의 황색섬유에서 rutin이 검출되어 괴화에 의한 염색으로 추정된다.
본 연구에서는 용액 중 플라즈마 공정을 이용하여 젤라틴/Ag 나노입자(AgNP) 용액을 제조하고 동결 건조하여 3차원 비계 형태의 생체복합재료를 성공적으로 제조하였다. 본 공정에서는 환원제 사용 없이 플라즈마 방전 중 수소 라디칼과 Ag 이온의 환원을 통해, 젤라틴 기지재 내에 지름 12~20 nm 크기의 구형 AgNP가 효과적으로 형성되었다. 젤라틴 농도가 높을수록(3%) AgNP의 분산안정성이 좋았으며, 3차원 비계 형태의 젤라틴의 미세공 조직이 작아지고 밀도가 높아지는 것으로 나타났다. 또한 AgNP의 농도가 높을수록(5 mM) 항균효과가 좋았는데, Ag5G3 생체복합재료를 사용했을 때 황색포도상구균의 생장은 44% 감소되었고, 대장균의 생장은 100% 감소되어 그람 음성균에 대한 항균력이 더 좋은 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.