• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.258-267
• /
• 1993

A mathematical model has been developed to describe heat transfer phenomena in a PCM (phase change material) module for development of an energy recovery system. The PCM module, melting point of which is around 1673 K, consists of silicon(96.8%), aluminium(2.7%) and marginal amounts of impurities such as Ca, Fe and Ti. The module is covered by a capsule that consists of SiC(58%) and graphite(42%). Physical properties that are required for model predictions were cited from the references. The apparent capacity method and the postiterative method wert used in the mathematical model to describe the phase changing mechanism. Temperature and velocity of fluid are the major variables in the model calculation. For the gas temperature of 1773 K that simulates real operating conditions, the prediction shows that PCM is rapidly melted to axial direction. However, for the gas temperature of 3000 K that is higher than the real conditions, PCM is melted rapidly to the radial direction. The gas velocity has no influence on the melting phenomena of the PCM except when the gas velocity is relatively low. At the low gas velocity asymmetry of the temperature profiles in PCM is obtained.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.221-236
• /
• 2005

In order to investigate the contamination levels and dispersion patterns of heavy metals such as Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn by urbanization, soils beneath roadside-trees and leaves of Ginkgo biloba were collected from Seoul area during October to November in 2001. All tree leaves were grouped into washed and unwashed ones. The pH of most soil ranges from 6 to 9 indicating a weak acidic and alkaline. The element couples of Cd-Co, Cr-Ni and Zn-Cu-Pb have good correlation in soils, and contamination sources of Cd-Co, Cr-Ni and Zn-Cu-Pb could be similar. High correlation coefficients among Pb, Cu and Zn in G. biloba indicates that these elements show the similar behavior during the metabolism processes. From the results of pollution index calculation for soils, industrialized and heavy traffic area were severly polluted by heavy metals such as Cd, Cu, Pb and Zn. By the discriminant analysis, industrialized and heavy traffic areas are enriched in the order of Ni> Cr> Pb. Cadmium is useful to discriminate between industrialized and heavy traffic areas, Co and Pb are highly enhanced in heavy traffic area.

• Journal of the Korean Society of Groundwater Environment
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The objectives of this study are to investigate the groundwater and surface water contamination, to interpret the attenuation mechanism of contaminant transport, and to find the appropriate contamination indicator. at the two big landfill sites : Nanjido Landfill and Hwasung Landfill. Leachate from the Nanjido, th, Hwasung and the Kimpo waste disposal sites is characterized by high temperature (31.7-40.1$^{\circ}C$), high electric conductivity (14,650-32,800 ${\mu}$S/cm), somewhat higher pH(7.58-8.45) and low Eh (-119.4-20.4 mV), and is enriched in both major (Na$^{＋}$, K$^{＋}$, Ca$^{2＋}$, Mg$^{2＋}$, HC $O_3$$^{－}$, Cl$^{－}$) and minor (Mn, Sr$^{2＋}$, Ba$^{2＋}$, Li$^{＋}$, F$^{－}$, Br$^{－}$) ions. Municipal solid waste leachate and industrial waste leachate are effectively discriminated by the content of S $O_4$$^{2－}$, Fe, and heavy metals. The attenuation mechanism of each component was assessed using the chemical analysis. Cl-normalizing process, WATEQ4F simulation, and preceding flownet analysis. Based on the calculation of Contamination Factor, K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br and TOC are effective contamination indicators in the Nanjido landfill site, and K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br and TOC in the Habsburg landfill site Particularly, TOC is the best contamination indicator in landfill sites influenced by sea water.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.938-945
• /
• 2005

The microstructure evolution in hot forging process is composed of dynamic recrystallization during deformation as well as grain growth during dwell time. Therefore, the control of forging parameters such as strain, strain rate. temperature and holding time is important because the microstructure change in hot working affects the mechanical properties. Modeling equations are developed to represent the flow curve. grain size. recrystallized volume fraction and grain growth phenomena by various tests. The developed modeling equations were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The large exhaust valve spindle (head diameter of 512mm) was simulated by closed die forging with hydraulic press and cooled in air after forging. The preform was heated to each 1080 and 1150$^{\circ}C$. Numerical calculation was performed by DEFORM-2D. a commercial finite element code. Heat transfer can be coupled with the deformation analysis in a non-isothermal deformation analysis. In order to obtain the fine and homogeneous microstructure and good mechanical properties in forging. the FEM would become a useful tool in the simulation of the microstructure development. In forging, appropriate temperature, strain and strain rate and rapid cooling are required to obtain the fine grain microstructure The optimal forging temperature and effective strain range of Nimonic 80A for large exhaust valve spindle are about 1080$\∼$l120$^{\circ}C$ and 150$\∼$200$\%$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.73-79
• /
• 2014

The sandwich shell with Egg-box core has been used for the combustion chamber case of air breathing propulsion system. The alteration on pitch length and thickness of Egg-box core was required to be lighter and save manufacturing time and cost of combustion chamber case. In this paper, the finite element analysis method which simulated bending test was used to predict the equivalent shear modulus which affect structural stability of sandwich shell in short time. The result of FE calculation on sandwich panel with homogeneous material, H130-foam core, showed a good agreement with the values available in the reference. The equivalent shear modulus of Egg-box core according to the variation of pitch length and thickness can be obtained.

• Journal of the Korean Magnetics Society
• /
• v.23 no.6
• /
• pp.205-208
• /
• 2013

The width dependence of Delta E has been studied by impedance resonance method in Fe-rich amorphous ribbon of as received state. It can be explained by single domain model include effective magnetic field $H_{eff}$ and demagnetization factor $N_d$. Wider width ribbon's effective is smaller than narrow it. Young's modulus also smaller than narrow width. These result well agreement in calculation. It has been also studied that linear magnetic field sensor using width dependence of Delta E under the field range 0 Oe~80 Oe. The sensitivity of the sensor was found to be 95 Hz/Oe.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.619-628
• /
• 2002

This paper deals with the FE analysis for the free vibration of sloshing in horizontal cylindrical tank with baffles. We use Laplace equation based on potential theory as governing equation. This problem is solved by FEM using lineal isoparametric elements. We assume that the tank as well as baffles is rigid body and by separating nodes into two at the baffle location, baffle effect is obtained by separating nodes into two at the baffle location. For the calculation of natural frequencies and mode shapes, we introduce Lanczos transformation and Jacobi iteration methods. Numerical results of the first longitudinal and transverse modes, while comparing with literature cited, are very good. In order for the baffle effects on the free vibration of sloshing, various combinations of baffle parameters, which are location, inner diameter and number, are examined.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.2
• /
• pp.69-89
• /
• 1991

The anorthositic rocks and the many other plutons which are of different varieties and age were distributed in the northern extremity of the distributed areas of H-S anorthositic rocks. The purpose of this study was to find plutons which had comagmatic relationships, and to make clear the magmatic process of anorthositic magma. The plutons were classified, and the petrological and the geochemical characteristics of the plutons were compared and researched in this study. And, because, like anorthosite, the rocks which intrude in the deep crust accompany assimilation, an AFC model calculation was performed to make the differentiation process of the anorthositic rocks clear. The plutons in this area were classified into three groups, and the three groups were composed of the Precambrian anorthositic rocks and related rocks, the Jurassic gabbro, and the plutons of undnown age. The anorthositic magma was differentiated from the anorthositic rocks through the tonalite to the alkali-feldspar granite, and it was differentiated under K, Mg, Fe free/lack condition. It was found from the result of AFC model that the anorthositic rocks were differentiated by fractional crystallization, but they were assimilated with wall-rocks, and the assimilation was performed at the rate of r$\leq$0.1. The plutons which intruded the anorthositic rocks subsequently consisted of the gabbro, the megacrystic granite, the fine-grained granite, and the gneissose granite. But they were formed by the repeated intrusion of magma, which may, or may not, be of the same origin. According to the result of the RCF model, these plutons were differentiated by simple fractional crystallization, and they were assimilated relatively less than the anorthositic rocks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.157-166
• /
• 2014

A light water reactor (LWR) fuel rod consists of zirconium alloy cladding tube and uranium dioxide pellets with a slight gap between them. The modeling of heat transfer across the gap between fuel pellets and the protective cladding is essential to understanding fuel behavior under irradiated conditions. Many researchers have been developing fuel performance codes based on finite element method (FE) to calculate temperature, stress and strain for multidimensional analysis. The gap conductance model for multi-dimension is difficult issue in terms of convergence and nonlinearity because gap conductance is function of gap thickness which depends on mechanical analysis at each iteration step. In this paper, virtual link gap element (VLG) has been proposed to resolve convergence issue and nonlinear characteristic of multidimensional gap conductance. In terms of calculation accuracy and convergence efficiency, the proposed VLG model has been evaluated for variable cases.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.93-106
• /
• 2001

T-joint and hopper knuckle joint models are typical welded joints in ship structure, which are very susceptible to fatigue damage under service condition. Fatigue test and fracture mechanical analysis were performed on these joints to find out characteristics of fatigue behavior. Unified S-N curve was developed from the test results of these two types of joint using hot spot stress concept, and also propagation life was also estimated using Paris' crack propagation law. Residual stress effect on propagation life was considered in calculating propagation life, as was done with thermo-elasto-plastic FE analysis and residual stress intensity factor calculation. Fatigue life of similar kinds of welded joint could be predicted with this unified S-N curve and fracture mechanical analysis technique.