• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1617-1624
• /
• 2013

논문에서는 방화셔터와 피난계단이 존재하는 실내 환경의 화재 시뮬레이션을 실시하여 방화셔터와 화재 확산 사이의 관계를 분석하였다. 화재 시뮬레이션용 상용 소프트웨어인 FDS(Fire Dynamics Simulator)를 사용하여 가상으로 설정한 실내 로비에서 화재 규모와 방화셔터의 개폐 여부를 변화시켜 가면서 모의실험을 실시하였다. 실험을 통해 화재실 벽면과 계단 입구의 온도 변화, 이산화탄소 농도 변화, 연기의 확산 등의 변수들을 구하고 결과를 검토하였다. 피난계단에서 온도와 이산화탄소의 분포는 화재규모와 개구부의 개폐 여부와 별 상관이 없으나, 방화셔터의 부분 하강이 연기의 확산을 막고 있음을 알 수 있었다.

• 한국가시화정보학회지
• /
• 제4권1호
• /
• pp.8-13
• /
• 2006

Fire simulation has been developed for decades to analyze fire cases and provide a tool to study fundamental fire dynamics and combustion. There are three way of fire simulation which are a full scale simulation, an experimental simulation and a computational simulation. In case of a full scale simulation, because a higher cost, a higher risk, more efforts are needed, a demand for it has been decreased. But recently a demand for an experimental simulation and a computational simulation has been increased. A computational simulation has several advantages; lower cost, short period, many case studies, more visual results, a quantitative result and etc. FDS(Fire Dynamics Simulator) which has been developed in BFRL(Building and Fire Research Laboratory), NIST(National Institute of Standards and Technology) is a popular world wide code for fire simulation. Lack of accurate predictions by the model could lead to erroneous conclusions with regard to fire safety. All results should be evaluated by the informed judgment of the qualified user.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.438-443
• /
• 2008

Fire model shall be verified and validated to reliably show the predictive capabilities for a specific use. In the process of model verification and validation, both the acceptable uses and limitation of fire model are established. In this study, the results of FDS simulation are compared with the data of PRISME experiment such as temperature, heat release rate, heat flux, product concentrations in the under-ventilated two-room condition. Furthermore, the sensitivity of FDS under ventilation condition changes are evaluated. FDS provide the reliable prediction for under-ventilated two-room fire scenario with slightly deviation.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 춘계학술논문발표회 논문집
• /
• pp.9-15
• /
• 2011

This study aims to validate predictive capabilities of FDS for the pool fire in three rooms connected to ventilation network. The three rooms in real scale fire test facility are configured to be similar to that of nuclear power plant in size, ventilation condition, construction material, etc. Basically three rooms are confined to the other area except two open doors and two ventilation duct in each room. The real scale fire test was conducted with these conditions and the predictive capabilities of FDS will be validated by comparing FDS simulation results with experimental data from the temperature, heat flux, and concentration point of view. This study concludes that temperature from FDS is about 25 % lower deviation from the experiment, and heat flux from FDS is about 5% deviation.

• 한국화재소방학회논문지
• /
• 제32권1호
• /
• pp.7-15
• /
• 2018

구획실 내 프로판 가스화재에 대해 Fire Dynamics Simulator (FDS)를 이용한 수치계산을 수행하고 실험과의 비교를 통해 적용된 연소모델 예측성능을 평가하였다. 검토된 연소모델은 FDS v5.5.3의 혼합분율 연소모델과 FDS v6.6.3의 Eddy Dissipation Concept (EDC) 모델이며, EDC 모델에서 화학반응기구는 1-step Mixing Controlled, 2-step Mixing Controlled, 3-step Mixing Controlled 및 Mixing Controlled 반응과 유한화학반응이 혼합된 3-step Mixed 반응을 적용하였다. 구획실 내부의 온도에 대해서는 각 연소모델들 간의 예측성능 차이는 그다지 크지 않음을 확인하였다. 연소모델 차이에 의한 $O_2$와 $CO_2$ 농도에 대한 예측성능 차이보다는 CO에 대한 예측결과 차이가 크게 나타났다. CO 농도에 대해서는 EDC 3-step Mixing Controlled 모델이 가장 높게 예측하며 혼합분율 연소모델은 실험보다는 낮게 예측하였다. EDC 3-step Mixed 모델이 가장 예측성능이 좋았지만 EDC 2-step Mixing Controlled 모델도 충분히 합리적인 수준으로 예측하고 있음을 확인하였다. EDC 1-step Mixing Controlled 모델에 기존에 제안된 CO 수율을 적용할 경우 CO 농도에 대해서 너무 과소 예측하며 CO 예측 정확도를 높이기 위해 수율을 높이면 $CO_2$ 농도에 대한 합리적인 예측이 어려워지는 문제점이 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.585-593
• /
• 2011

Actual fire test under a laboratory and fire simulation by using computer are considered into main methodology in order to estimate and predict fire size of railway train. Even if practical fire size could be obtained from the full-model railway car test such as a large scale cone-calorimeter test, it is not always possible and realistic due to that expensive cost and attendant dangers could in no way be negligible. In this point of view, fire simulation analysis method based on the computational fluid dynamics could be proposed as an alternative and it seems to be also efficient and reasonable. However, simulation results have to be verified and validated in accordance with the proper procedure including comparing analysis with the actual fire test. In this paper, fire load and growth aspect was investigated through the room corner test (ISO 9705) for the mock-up model of the actual railway car. Then, it was compared with the output data derived from the simulation by using Pyrolysis Model of the FDS (Fire Dynamics Simulator, by NIST) for the exact same domain and condition corresponding with pre-performed room-corner test. This preliminary verified and validated fire modeling method could enhance the reliability of output data derived from the fire simulation under the similar domain and condition.

• 한국화재소방학회논문지
• /
• 제24권5호
• /
• pp.60-67
• /
• 2010

화재분석모델이 제한사항 내에서 화재 피해를 신뢰성 있게 예측하기 위해서는 화재분석모델에 대한 검증분석이 반드시 이루어져야 하며, 이러한 검증분석 과정은 일반적으로 실증실험 결과와 비교함으로서 이루어진다. 본 연구의 목적은 화재분석모델인 FDS의 이중격실 Pool 화재에 대한 예측 능력을 평가하고, FDS의 중요 입력값(열방출률 및 환기량)의 미소변화에 따른 출력값(온도, 농도, 열유속)의 민감도를 분석하기 위함이다. FDS의 예측능력 평가와 FDS 입력변수의 민감도 분석을 위해 국제공동연구 PRISME 프로잭트로부터 화재실증 결과와 FDS 결과물을 비교분석하였다. 이중격실 Pool 화재에 대한 FDS의 예측능력은 화재실증 실험결과와 비교하여 약 ${\pm}$20% 오차범위를 나타내었다. 또한, FDS의 입력변수에 대한 민감도는 열방출율의 미소변화에 따라 비교적 높은 출력값의 변화가 나타났으며, 환기량의 미소변화에 따라 출력값 변화는 연소생성물의 농도에만 영향을 미쳤다.

• Steel and Composite Structures
• /
• 제10권2호
• /
• pp.129-149
• /
• 2010

The objective of this study is to formulate a general 3D material-structural analysis framework for the thermomechanical behavior of steel-concrete structures in a fire environment. The proposed analysis framework consists of three sequential modeling parts: fire dynamics simulation, heat transfer analysis, and a thermomechanical stress analysis of the structure. The first modeling part consists of applying the NIST (National Institute of Standards and Technology) Fire Dynamics Simulator (FDS) where coupled CFD (Computational Fluid Dynamics) with thermodynamics are combined to realistically model the fire progression within the steel-concrete structure. The goal is to generate the spatial-temporal (ST) solution variables (temperature, heat flux) on the surfaces of the structure. The FDS-ST solutions are generated in a discrete form. Continuous FDS-ST approximations are then developed to represent the temperature or heat-flux at any given time or point within the structure. An extensive numerical study is carried out to examine the best ST approximation functions that strike a balance between accuracy and simplicity. The second modeling part consists of a finite-element (FE) transient heat analysis of the structure using the continuous FDS-ST surface variables as prescribed thermal boundary conditions. The third modeling part is a thermomechanical FE structural analysis using both nonlinear material and geometry. The temperature history from the second modeling part is used at all nodal points. The ABAQUS (2003) FE code is used with external user subroutines for the second and third simulation parts in order to describe the specific heat temperature nonlinear dependency that drastically affects the transient thermal solution especially for concrete materials. User subroutines are also developed to apply the continuous FDS-ST surface nodal boundary conditions in the transient heat FE analysis. The proposed modeling framework is applied to predict the temperature and deflection of the well-documented third Cardington fire test.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.293-294
• /
• 2006

This paper aims to simulate by FDS(Fire Dynamics Simulator) the distributions of temperature and smoke on fires in accommodations on boards. The paper focuses on analysis of temperature at fire occurrence and soot density. The purpose of this study is to predict the possibility of safe escape and efficient fire extinguishing method using fire simulation results.

• 한국화재소방학회논문지
• /
• 제33권2호
• /
• pp.47-55
• /
• 2019

건물형태의 공간 내에서 발생한 고체연료 화재에 대해 Fire dynamics simulator (FDS)을 이용하여 설계화재곡선의 예측성능을 실험결과와 비교하여 평가하였다. FDS의 연소모델로서는 EDC 2-step mixing controlled를 적용하였으며 검토된 설계화재곡선들은 기존 연구들에서 제안한 2-stage design fire (TDF) 곡선, Quadratic 및 Exponential design fire 곡선들이다. 시뮬레이션 결과는 건물 내 연기 전파과정이 설계화재곡선에 많은 영향을 받는 것을 확인하였다. 설계화재곡선을 이용한 시뮬레이션은 건물 내 실험온도결과에 대해 합리적으로 예측하고 TDF가 가장 온도를 무난하게 예측하는 것을 확인하였다. 그리고 각 설계화재곡선의 화학종 농도에 대한 예측은 실험과 충분히 예측하지 못하는 것을 확인하였다. 이점은 본 연구에서 사용한 연소모델은 고체연료 화재에 대한 시뮬레이션에 적합하지 않음을 나타내며 고체연료의 예측에 대한 FDS 연소모델에 대한 연구가 추가적으로 필요해 보인다.