• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.715-726
• /
• 2018

Various methods, such as geophysical exploration, temperature measurement, and fiber optics, have been developed for detecting the seepage at a dam. In this study, in order to investigate the possibility of leakage detection using dielectric constant of FDR sensor, a physical model consisting of weak and no-weak zones is fabricated and the sensors for dielectric constant, temperature and pore water pressure measurements are installed. As a leakage happens, the dielectric constant changes more rapidly through a weak zone than no-weak zone. In addition, comparing three factors (dielectric constant, temperature, and pore water pressure), the response of dielectric constant to seepage is fast and it is easily recognized even at the end measurement point. Considering these features, it is concluded that it could be possible to cope with the leakage detection quickly and efficiently if the dielectric constant is measured at the downstream slope of a dam.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.401-408
• /
• 2022

As research on a controlled environment system based on crop growth environment sensing for sustainable production of horticultural crops and its industrial use has been important, research on how to properly utilize soil moisture sensors for outdoor cultivation is being actively conducted. This experiment was conducted to suggest the proper method of utilizing the TEROS 12, an FDR (frequency domain reflectometry) sensor, which is frequently used in industry and research fields, for each orchard soil in three regions in Korea. We collected soils from each orchard where fruit trees were grown, investigated the soil characteristics and soil water retention curve, and compared TEROS 12 sensor calibration equations to correlate the sensor output to the corresponding soil volumetric water content through linear and cubic regressions for each soil sample. The estimated value from the calibration equation provided by the manufacturer was also compared. The soil collected from all three orchards showed different soil characteristics and volumetric water content values by each soil water retention level across the soil samples. In addition, the cubic calibration equation for TEROS 12 sensor showed the highest coefficient of determination higher than 0.95, and the lowest RMSE for all soil samples. When estimating volumetric water contents from TEROS 12 sensor output using the calibration equation provided by the manufacturer, their calculated volumetric water contents were lower than the actual volumetric water contents, with the difference up to 0.09-0.17 m³·m^-3 depending on the soil samples, indicating an appropriate calibration for each soil should be preceded before FDR sensor utilization. Also, there was a difference in the range of soil volumetric water content corresponding to the soil water retention levels across the soil samples, suggesting that the soil water retention information should be required to properly interpret the volumetric water content value of the soil. Moreover, soil with a high content of sand had a relatively narrow range of volumetric water contents for irrigation, thus reducing the accuracy of an FDR sensor measurement. In conclusion, analyzing soil water retention characteristics of the target soil and the soil-specific calibration would be necessary to properly quantify the soil water status and determine their adequate irrigation point using an FDR sensor.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.110-116
• /
• 2009

This study was to verify and calibrate seven kinds of soil water sensors for volumetric soil water content(VSWC) measurement under field. Types of sensors were TDR (Time Domain Reflectometry) and FDR(Frequency Domain Reflectometry). Two kinds of TDR were TRIME(profile type), and Mini-TRASE(rod type). Five kinds of FDR were EasyAG, EnviroSCAN, PR-1(profile type), and WET-1(rod type). VSWC by TRIME and Mini-TRASE compared with VSWC by soil core showed the standard error of about 2.4%, and 1.4% which is the smallest value among all the sensors used in the experiment, respectively. The errors of EasyAG and EnviroSCAN analyzed with scaled frequency(SF) were about 2.6%, and 2.8% and those by 1 versus 1 correspondence were about 2.6%, and 2.6%, respectively. WET-1 showed about 2.0% of error, which is the smallest value among errors by FDR sensors. PR-1 with the error of about 4.7% should be hard for application in field. Therefore, users on soil water sensors have to take into consideration the errors of sensors revealed after the calibration for the correct measurement of VSWC in field. The rest except for PR-1 among the sensors could be used for VSWC measurement with 1.4~2.6% error.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.404-405
• /
• 2014

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.163-172
• /
• 2020

Flight data recorder (FDR) for accident investigation is required to comply with EUROCAE(ED-112) standard so that flight data can be restored when exposed to extreme conditions due to aircraft crash. Since the ED-112 standard defines the general requirements for all aircraft, it is essential to analyze detailed requirements for FDR software to apply appropriate requirements selectively according to the configuration and operation concept of a specific aircraft. In this paper, the software requirements applicable to unmanned aircraft will be analyzed and the FDR software design will be proposed. Also, a software verification method for each requirement will be presented to verify that the implemented software is designed to satisfy all requirements.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.455-459
• /
• 1985

This study is to select good diploid clones and develope them into FDR clones. Seventeen diploid clones were selected by tuber plants from the imported diploid potato seeds and from the progenies of the crosses between them. The characteristics of the selected clones were reported. Fifteen clones were crossed among them or open pollinated or bulk pollinated, and 18 selections were made from the seed progenies of these pollinations. Male and female unreduced gametes were searched by crossing 2x, 4x and by microtechnique. Only one clone, D6-21 was found to produce unreduced male gamete with the rate of 27-30% by FDR. Unreduced female gamete has not been found among these diploids.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.2
• /
• pp.87-92
• /
• 2012

Voltage and current phasor estimation has been executed by GPS-based synchronized PMU, which has become an important way of wide-area blackout protection for the prevention of expending faults in a power system. The PMU technique can not easily get the field data and it is impossible to share information, so that there has been used a FNET(Frequency Monitoring Network) method for the wide-area intelligent protection in USA. It consists of FDR(Fault Disturbance Recorder) and IMS(Information Management System). Therefore, FDR must provide an optimal frequency estimation method that is robust to noise and failure. In this paper, we present comparative studies for the frequency estimation method using IRDWT(Improved Recursive Discrete Wavelet Transform), FRDWT(Fast Recursive Discrete Wavelet Transform), and DFT(Discrete Fourier Transform). The Republic of Korea345[kV] power system modeling data by EMTP-RV are used to evaluate the performance of the proposed two kinds of RDWT(Recursive Discrete Wavelet Transform) and DFT. The simulation results show that the proposed frequency estimation technique using FRDWT could be the optimal frequency measurement method, and thus be applied to FDR.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.473-479
• /
• 2002

NHPP에 근거한 SRGM을 구성하는 새로운 안을 제시한다. 본 논문의 주요 초점은 소프트웨어 신뢰도모델링에서 효과적인 파라미터분해기법을 제공하는 것이다. 이는 테스트노력과 결함검출비를 동시에 고려하는 것이다. 일반적으로, 소프트웨어결함검출/제거메카니즘은 이전의 검출/제거결함과 테스트노력을 어떻게 활용하느냐에 달려있다. 실제 현장 연구로부터 우리는 테스트노력소모패턴을 추론하여 FDR의 경향을 예측할 수 있을 것으로 생각된다. 결함검출이 증가, 감소 및 일정한 것 등 광범위에 걸쳐서 나타나는 경향을 잡아내는 고유의 융통성을 가지는 하나의 시변수집합인 FDR모델에 근거한 테스트노력을 개발하였다. 이 스킴은 구조에 융통성이 있어서 여러 가지 테스트노력을 고려하여 광범위한 소프트웨어 개발 환경을 모델화할 수 있다 본 논문에서는 FDR을 기술하고, 관련된 테스트 행위를 이러한 새로운 모델링접근법에 연합시킬 수 있다. 우리의 모델과 그리고 이것과 관련된 파라미터 분해기법을 적용한 것을 여러 가지 소프트웨어 프로젝트에서 도출한 실제 데이터집합을 통하여 시연한다. 분석결과에 의하면 SRGM에 관한 테스트노력과 FDR을 결합하기 위한 제안된 구조가 상당히 정확한 예측능력을 보여주고 있으며, 실제 수명상황을 좀더 정대하게 설명해 준다. 이 기법은 광범위한 소프트웨어시스템에 쓰일 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.568-576
• /
• 2010

In this paper, we analyze the outage probability of full duplex relay (FDR) with decode-and-forward (DF) protocol is derived under fading channels. The fading channel for source-relay link is assumed to be Rician fading to consider the infrastructured fixed relay with line of sight (LOS) propagation, and the other fading channels are assumed to be Rayleigh fading. Based on this analytical result, we provide the criterion that FDR shows a lower outage probability than HDR to consider the interference problem and the resource efficiency improvement by full duplex (FD) operation. The accuracy of the analysis is confirmed throughout the simulation results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.557-563
• /
• 2012

The purpose of this study is to analyze the spatial structure of Mega-Economic Region particularly in Daegu using Freight Origin-Destination (O/D) Data which comes from KTDB. To diagnose the appropriate separation of Regions, the mean of three standardized indices was calculated. The indicates measured are Freight Occupancy Ratio (FOR), Freight Dependancy Ratio (FDR), Scale Parameter (SP), respectively. The result of analysis showed that FOR FDR SP indicators gave effective explanation about characteristic of Regions depending on Freight moving patterns. Especially, Gyeongsan and Gumi had high correlation Regions with FOR FDR indicator. Also, the major industries of Daegu Metropolitan based on the SP indicator are Chemical and Metal machinery industry.