• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.545-550
• /
• 2001

A two-dimensional laminar flow through a channel, on which a couple of symmetric vertical fins are attached, is investigated. The stokes flow for this channel flow is investigated analytically and laminar flow numerically. For analytic solution, the method of eigen function expansion and collocation method are employed. For numerical solution, finite difference method(FDM) is used to obtain vorticity and stream function. From the results, streamline patterns are shown and the pressure drop due to the attached fins is calculated, which depends on the length of fins and Reynolds number. While $Re, streamline pattern is symmetric, a pair of additional asymmetric solutions appear for $Re>Re_c$, where the critical Reynolds number $Re_c$ depends on the length of the fin.

• 대한전자공학회논문지SD
• /
• 제42권1호
• /
• pp.39-46
• /
• 2005

본 연구에서는 광논리 및 광접속에 응용할 수 있는 GaAs/AIGaAs 구조의 완전 공핍 광 싸이리스터(depleted optical thyristor, DOT)에 1/4 파장 거울층 (quarter wavelength reflector stacks, QWRS)을 제작하여 특성을 측정 분석하였다. 바닥면에 위치한 QWRS는 광 방출 효율뿐만 아니라 흡수 효율을 증가시킨다. 바닥면에 QWRS를 넣은 것과 그렇지 않은 두가지의 DOT를 제작하여 비선형 S-자 형의 전류-전압 특성, 광 방출 효율 및 흡수 효율을 측정, 분석하였다. 하부 거울층을 삽입한 DOT와 기존의 DOT의 스위칭 변화는 각각 1.82 V와 1.52 V로 흡수효율에서 20 % 증가함을 보인다. 뿐만 아니라, 하부 거울층을 이용한 DOT는 기존의 소자에 비하여 발광 효율 면에서 최고 46 % 향상된 결과를 나타낸다. 스위칭 특성을 분석하기 위하여 순방향 전압에서 비선형 s-자형의 전류-전압 특성을, 역방향 전압에서 완전 공핍 전압을 모의실험을 통하여 알아보았다. 모의실험 방법으로 유한 차분 방법 (finite difference method, FDM)을 이용하여 최적화된 DOT 각 층의 두께와 도핑 농도를 구하였다.

• 터널과지하공간
• /
• 제31권6호
• /
• pp.549-560
• /
• 2021

쉴드 TBM(Tunnel Boring Machine) 굴진 시 TBM에 작용하는 커터헤드 토크, 추력, 챔버압, 상향력 등은 TBM의 굴진성능을 결정하는 데 매우 중요한 요소들이다. 그러나 균질한 지반 조건에 비해 복합지반을 굴진할 때 TBM에 작용하는 힘들은 그 경향이 달라 TBM 굴진성능을 저해할 수 있다. 따라서 본 연구에서는 복합지반 굴진이 TBM에 작용하는 토크, 추력, 챔버압, 상향력에 미치는 영향을 수치해석적으로 모사하고자 하였다. 해석 모델은 개별요소법(DEM, discrete element method)과 유한차분법(FDM, finite difference method)을 연계하는 방안을 적용한 TBM 굴진 모델을 사용하였다. 본 연구에서는 상부 화강풍화토와 하부 풍화암으로 구성된 복합지반을 굴진하는 것을 가정하여 굴진을 모사하였으며, 복합지반 경계면의 위치, 경사에 따라 TBM에 작용하는 힘에 대한 영향을 해석적으로 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.939-941
• /
• 2005

This research presents a 3D multi-objective approach regarding both magnetic and thermal characteristics associated with design of C-core actuator. The adjoint variable topology sensitivity equations are derived using the continuum method for three dimension. The sensitivity is verified using the Finite Difference Method(FDM). Convection interpolation function is proposed for density method of topologies such that convection term can be taken into consideration for practical design in the process of the optimization.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.82-86
• /
• 2005

Numerical methods to estimate behaviors of jointed rock mass can be roughly divided into two methods : continuous and discontinuous model. Generally, distinct element method(DEM) is applied in discontinuous model, and finite element method(FDM) or finite difference method(FDM) is utilized in continuum model. To predict a behavior of discontinuous model by DEM, it is essential to understand characteristics of joints developed in rock mass through field tests. However, results of field tests can not provide full information about rock mass because field tests are conducted in limited area. In this paper, discontinuous analysis by UDEC and continuous analysis by FLAC are utilized to estimate a behavior of a tunnel in jointed rock mass. For including discontinuous analysis in continuous analysis, joints in rock mass is considered by reducing rock mass properties obtained by RMR and decreasing shear strength of rock mass. By comparing and revising two analysis results, analysis results similar with practical behavior of a tunnel can be induced and appropriate support system is decided.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.225-228
• /
• 1999

In a plastically deformed body the formation of a shear band is widely observed in the engineering materials during rapidly forming process for a thermally rate-sensitive material. The localized shear bond stems from evolution of a narrow region in which intensive plastic flow occurs. The shear band often plays as a precursor of the ductile fracture during a forming process. The objectives of this study are to investigate the localization behaivor by using numerical method thus predict the failure. In this work the implicit finite difference scheme is preformed due to the ease of covergence and the numerical stability. This study is based on an analysised material with hardening as well as thermally softening behavior which includes isotropy strain hardening. Furthermore this paper suggests that an anticipated and suggested a kinematic hardening constitutive equation be requried to predicte a more accurate strain level wherein a shear band occurs.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.93-98
• /
• 2006

The numerical analysis of the negative pressure porous gas bearings is presented. The pressure distribution is calculated using the finite difference method. The Reynolds equation and Darcy's equation are solved simultaneously. The air bearing stiffness and damping are evaluated using the perturbation method. Rectangular uniform grid is employed to model the bearing. The vacuum preloading is considered. The pressure in the vacuum pocket is assumed to be a constant negative pressure. The total load, stiffness, damping and flow rate are calculated fur several geometrical configurations and several values of negative pressure. It is found that too large vacuum pocket can result in negative total force.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.965-968
• /
• 2005

Roll drafting operation causes variations in the linear density of bundles because the bundle flow cannot be controlled completely by roll pairs. Defects occurring in this operation bring about many problems successively in the next processes. In this paper, we attempt to analyze the draft dynamics and the linear density irregularity based on the governing equation of a bundle motion that has been suggested in our previous studies. For analyzing the dynamic characteristics of the roll drafting operation, it is indispensable to investigate a transient state in time domain before the bundle flux reaches a steady state. However, since governing equations of bundle flow consisting of continuity and motion equations turn out to be nonlinear, and coupled between variables, the solutions for a transient state cannot be obtained by an analytical method. Therefore, we use the Finite Difference Method(FDM), particularly, the FTBS(Forward-Time Backward-Space) difference method. Then, the total equations system yields to an algebraic equations system and is solved under given initial and boundary conditions in an iterative fashion. From the simulation results, we confirm that state variables show different behavior in the transient state; e.g., the velocity distribution in the flow field changes more quickly the linear density distribution. During a transient flow in a drafting zone, the output irregularity is influenced differently by the disturbances, e.g., the variation in input bundle thickness, the drafting speed, and the draft ratio.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.551-558
• /
• 2000

When cut slope is excavated, corestone in cut slope exists 20∼30%. In case of soil and soft rock mixing, people lay out gradient of 1 : 0.5, because of soft rock slope. In a case, slope that exists corestone between soil happens to large landslide. So, As a study performs geological survey, Analysis of slope stability reinforcement measures, etc, A study presents example meaures and analysis on slope stability of corestone.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.547-550
• /
• 2005

In many machines handling lightweight and flexible media, such as automated teller machines and printers, the media must transit an open space. It is important to predict the static and dynamic behavior of the sheets with a high degree of reliability The nonlinear theory of the dynamic elastica has often been used to a nonlinear dynamic deflection model. In this paper, the governing equation is derived and simulated by the finite difference method. The analysis has to include aerodynamic effect for more exact behavior analysis, because the flexible media can be deformed drastically by a little force. Therefore aerodynamic force must be applied to the governing equation. Different results were obtained with and without aerodynamic effect and the resulted show that after contacting circular guide, the directions of flexible media of two cases are different.