• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1162-1170
• /
• 2019

Finite-control-set model predictive control (FCS-MPC) is a promising control scheme for two-level voltage-source inverters (TL-VSIs). However, two main issues arise in the classical FCS-MPC method: an exponentially-increasing computational time and a low steady-state performance. To solve these two issues, a novel FCS-MPC method has been proposed for n-phase TL-VSIs in this paper. The basic idea of the proposed method is to carry out the FCS-MPC scheme of TL-VSIs for one leg by one leg, like a "pipeline". Based on this idea, the calculations are reduced from exponential time to linear time and its current waveforms are improved by applying more switching states per sampling period. The cases of three-phase and five-phase TL-VSIs were tested to verify the effectiveness of proposed method.

• Journal of Hospice and Palliative Care
• /
• v.27 no.2
• /
• pp.82-86
• /
• 2024

Purpose: This study examined the quality of life (QoL) and quality of care (QoC) in inpatient hospice settings in Korea before and during the coronavirus disease 2019 (COVID-19) pandemic. Methods: Data were obtained from three institutions that participated in two prospective cohort studies. The primary outcomes measured were the QoL of patients with terminal cancer and their family caregivers (FCs), as well as the QoC as perceived by the FCs. Results: Multivariable regression analysis revealed that during the COVID-19 pandemic, both patients and FCs experienced better QoL than before the pandemic, and FCs reported a higher QoC. Conclusion: Health policymakers should consider our findings when planning for future pandemics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.11
• /
• pp.836-845
• /
• 2001

A Novel fully-differential bipolar current subtracter(FCS) and its application to current controlled current amplifier(CCCA) for high-accuracy current-mode signal processing were designed. To obtain full-differential current output, the FCS was symmetrically composed of two current follower with low current-input impedance. The CCCA to control output current by the bias current was consisted of the subtracter and a current gain amplifier(CGA) with single-ended current output.. The simulation result shows that the FCS has current-input impedance of 5 Ω and a good linearity. The CCCA has 3-dB cutoff frequency of 20 MHz for the range over bias current 100 $\mu$A to 20 mA. The power dissipation of the FCS and CCCA are 1.8 mW and 3 mW, respectively.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.468-477
• /
• 2014

This paper proposes a novel perceptual quality-based (PQ-based) video coding method with foveated contrast sensitivity (FCS). Conventional methods on PQ-based video coding with FCS achieve minimum loss on perceptual quality of compressed video by exploiting the property of human visual system (HVS), that is, its sensitivity differs by the spatial frequency of visual stimuli. On the other hand, PQ-based video coding with foveated masking (FM) exploits the difference of the sensitivity of the HVS between the central vision and the peripheral vision. In this study, a novel FCS model is proposed which considers both the conventional DCT-based JND model and the FM model. Psychological study is conducted to construct the proposed FCS model, and the proposed model is applied to PQ-based video coding algorithm implemented on HM10.0 reference software. Experimental results show that the proposed method decreases bitrate by the average of 10% without loss on the perceptual quality.

• Korean Journal of Animal Reproduction
• /
• v.11 no.1
• /
• pp.73-84
• /
• 1987

This experiment was carried out to investigate the effects of hormone addition(FSH, HCG, estrogen and progesterone) and composition (BSA and FCS) of mKRB on the in vitro maturation and fertilizability of follicular oocytes of the Korean native cattle. The ovaries were removed at a slaughterhouse, returned to laboratory in a thermostat (30-35$^{\circ}C$) within 4 hr, and collected by aspirating normal follicles which had diameters of 1 to 6 mm. The oocytes with cumulus cells were cultured for 8, 16, 24 and 30 hr in a modified KRB solution containing BSA or FCS and hormones. The in vitro matured oocytes in mKRB containing FCS, FSH and steroids were transferred in the rabbit uterus for examination of their in vivo fertilizability with bovine sperm preincubated 4 to 6 hr in the rabbit uterus. 1. The mean number of oocytes collected per cattle was 6.5 from 1-3mm follicles, 1.3 from 4-6mm follicles, and total was 7.7. 2. The meiotic division at 16hr-cuture in the oocytes from 1-3mm follicles was slightly stimulated by the addition of FSH in mKRB + BSA solution compared with the control. At 30hr-culture, their maturation rates(%Met II) were also increased by FSH of 1 $\mu\textrm{g}$/ml(38.4%) and 5$\mu\textrm{g}$/ml(35.7%) as compared with the control (21.4%). The maturation rate at 30hr-culture in the oocytes from 4-6mm follicles was 53.8% and 57.1% by the FSH addition of 1$\mu\textrm{g}$/ml and 5$\mu\textrm{g}$/ml, respectively. These rates were similar with the control(57.1%), but higher than those of oocytes from 1-3mm follicles. 3. The meiotic division at 16hr-culture in the oocytes from 1-3mm follicles was stimulated by the HCG addition of 1IU/ml and 5IU/ml. However, the maturation rate at 30hr-culture was greatly decreased by the HCG addtion (26.6% and 13.3%) compared with the control(53.3%) and these rates (30.8%) in the oocytes from 4-6mm follicles were also lower than that fo the control(58.3%). 4. Low maturation rate (37.5%) of the oocytes cultured in mKRB containing BSA and 5IU/ml HCG was increased (55.0%) when 15% FCS with HCG was added to mKRB instead of BSA. 5. When 16hr-cultured oocytes in mKRB containing BSA and gonadotropins (5$\mu\textrm{g}$/ml FSH and 5IU/ml HCG) were transferred in the medium without gonadotropins and recultured for 16hr, the maturation rate of HCG-treated oocytes was greatly improved. 6. The maturation rates of oocytes were greatly affected by steroids. The combined addition of FCS+FSH+estrogen or +progesterone to mKRB increased the maturation rate compared with the combination of BSA+FSH or FCS+FSH in mKRB. 7. The fertilization rate, presence of pronuclei, was increased by the combination of FCS+FSH+p in mKRB as compared with that (5.6%) of BSA+FSH and the rates of FCS+FSH+steroids ranged from 12.5 to 17.6%.

• Korean Journal of Animal Reproduction
• /
• v.17 no.3
• /
• pp.233-242
• /
• 1993

The effects of in vitro maturation and sperm treatment condition on the in vitro fertilization (IVF) and developmental capacity of bovine oocytes were investigated and the development of embryos was compared under the 2 different co-culture system, with GC or BOEC. The cultured embryo to 16 cell or morula wre transferred into recipients or frozen by 2 different freezing method. The results obtained were summarized as follows; 1. In vitro maturation rates of vovine follicular oocytes cultrued in TCM199 with 10% FCS or ECS were 64.0% and 72.7%, but the case of addition of 10% FCS or ECS to TCM199 co-cultured with granulosa cells were 81.3% and 84.0%, respectively. IVM rate of three TCM199 added to granulosa cells was higher than that of media without granulosa cells. 2. When bovine follicular oocytes were matured in TCM199 with 10% FCS and GC and then fertilized in vitro by sperm treated with caffeine, embryo developments of bovine oocytes co-cultured with BOEC were 38.4% and 51.4%, respectively. But those of bovine oocytes co-cultured with GC were 52.2% by sperm treated with caffeine-heparin. 3. Cleavage rates of bovine oocytes cultured with 10% FCS alone and fertilized in vitro by sperm treated with caffeine-heparin was 33.0%. 4. When bovine follicular oocytes were matured in TCM199 with 10% FCS and GC, embryo developments of bovine ooctyes co-cultured with BOEC of GC were 46.0% and 50.2%, respectively. 5. When bovine follicular oocytes were matured in TCM199 with 10% ECS and GC, embryo developments co-cultured with BOEC or GC were 45.2% and 51.4%, respectively. 6. When Korean Native cow's follicular oocytes matured in TCM199 with 10% FCS and GC, embryo developed co-cultured with BOEC or GC were 45.2% and 51.4%, respectively. 6. When Korean Native cow's follicular oocytes matured in TCM199 with 10% FCS and GC, embryo developments of the bovine oocyte co-cultured with BOEC and GC were 41.8% and 60.1%. But with FCS 10% those of the bovine oocytes co-cultured with BOEC and GC were 42.0% and 48.4%, respectively. 7. When Holstein's follicular oocytes were matured in TCM199 with 10% ECS and GC, embryo developments fo the bovine oocytes co-cultured with BOEC and GC were 50.0% and 57.7%, but with ECS 10% those of the bovine oocytes co-cultured with BOEC and GC were 52.2% and 56.5%, respectively. 8. The viability of frozen-thawed embryos ranged from 60~80% and those of frozen-thawed embryos from vitrification was lower than that from conventional metiod. 9. The selected fresh embryos were transferred nonsurgically to 7 recipients but did not result in pregnancy.

• Korean Journal of Animal Reproduction
• /
• v.19 no.2
• /
• pp.135-140
• /
• 1995

The study was conducted to investigate on the survival rate of bisected porcine embryos co-cultured in 10% FCS(v/v)＋TCM-199 media containing hormones, oviductal epithelial cells and cumulus cells 0 to 72 hrs after bisection. In vitro survival rate was defined as development rate on in vitro culture or FDA-test. The results are summarized as follows ; 1. The survival rate of bisected porcine embryos cultrued in 10% FCS＋TCM-199 media contaning PMSG, hCG, PMSG＋hCG, hCG＋$\beta$-estradiol 0 to 20 hrs and 20 to 40 hrs were 37.6% and 37.5%, 28.6% and 28.6%, 35.7% and 28.8%, 30.8% and 23.1%, 38.5% and 30.7%, respectively. The survival rate of bisected embryos co-cultured in TCM-199 media containing hormones, oviductal epithelial cells and cumulus cells was significantly higher than that of non co-culture. 2. The survival rate of bisected porcine embryos co-cultured 10% FCS＋TCM-199 media containing oviductal epithelial cells 4 to 5 hrs and 20 to 24 hrs were 42.9% and 38.5%, respectively. 3. The survival rate of bisected porcine embryos co-cultured in 10% FCS＋TCM-199 media containing cumulus cells 4 to 5 hrs and 20 to 24 hrs were 40.0% and 35.7%, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.4
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.104-109
• /
• 2007

This paper is about a redundancy management system design for the Smart UAV(unmanned aerial vehicle) which utilizes the tilt..rotor mechanism. In order to meet the safety requirement on the PLOC(probability of loss of control) of $1.7{\times}10^{-5}$ per flight hour for FCS (flight control system) failures, a digital FCS is mechanized with a dual redundant structure. A fault detection system which is composed of a CCM(cross channel monitor) and analytic redundancy using the Kalman filtering is designed, and its effectiveness is evaluated through experiments. A threshold level and persistence count for managing redundant sensors are designed based on the statistical analysis of the FCS sensors. To increase the survivability of the UAV after the loss of critical sensors in the SAS(stability augmentation system) and to provide reference information for a tie-breaking condition at which an ILM(in-line monitor) cannot distinguish the faulty channel between two operating ones, the Kalman filter approach is investigated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.272-273
• /
• 2014

Existing the free-form concrete segments (FCS) mold is produced by state of solid such as steel, wood, Styrofoam that can not be recycled. Using FCS mold result in delay on schedule and decrease of productivity because it consists of irregular curved variety and it requires more time than fixed mold. Thus, FCS mold should be developed which can reduce the costs and also it can be used as semipermanent. The aim of this study is to suggest of flexible mold production process for using the phase change materials(PCM). PCM is maintain that its solid state at low temperature but it changes phase to liquid state by heating. PCM is suitable material for flexible mold due to change of phase in relatively high temperature compare to other phase change materials such as water. Flexible mold is possible that reuse semi-permanently made by PCM. Thus, this study is proposed the process of flexible mold production for using the PCM. The study results will be used as the basic theory for studies on production and installation of FCS.