• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 추계학술대회
• /
• pp.125-127
• /
• 2012

With the progress of electronics and radio communication technology, human enjoys greater freedom in communication. However, EMW (Electro-Magnetic wave) environments have became complicate and more difficult to control. Thus, international organizations, such as the American National Standard Institution (ANSI), Federal Communications Commission (FCC), the Comite Internationale Special des Perturbations Radio electrique (CISPR), etc, have provided standard for controlling the EM wave environments and for the countermeasure of the electromagnetic compatibility (EMC). In this paper, the status of EMW absorber and the goal of smart EMW absorber ifor the future were described. Furthermore, design method of the smart EM wave Absorber with heat radiating function was suggested. The designed smart EM wave Absorber has the absoption ability of more than 5 dB from 2 GHz to 2.45 GHz band, one optimum aperture (hole) size of which was 6 mm, 9 mm in adjacent hole space, and 6.5 mm in thickness, respectivly. Thus, it is repected that these results can be applied to various EMC devices in electronic, communication, and controlling systems.

• 한국주조공학회지
• /
• 제29권2호
• /
• pp.64-69
• /
• 2009

In the present study the effect of cooling rate during solidification on the microstructural characteristics of Al-xAg (x = 31, 33, 35 at.%) in-situ binary eutectic composites has been investigated. To provide a wide range of cooling rate three different casting techniques, i.e. conventional casting, injection casting, and melt spinning have been used. The observed microstructure is very much dependent on the cooling rate. The fcc ${\alpha}$-Al and hcp $Ag_2Al$ phases exhibits an orientation of (111)Al//(0001)$Ag_2Al$, [1-10]Al//[11- 20]$Ag_2Al$. The microstructure of the melt-spun samples contains Widmanstatten structure resulting from solid-state transformation and nano scale two-phase structure resulting from solid-state phase separation. The microstructure of injection-cast samples contains eutectic structure and solid state phase-separated structure. On the other hand, conventional-cast samples exhibit a microstructure consisted of plate-type eutectic structure.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.14-24
• /
• 1996

We have investigated atomic and electronic structures of a clean Pd(111) surface using low energy electron diffraction (LEED) and angle-resolved photoemission spectroscopy (ARPES). A typical clean LEED pattern with a 3-fold symmetry has been observed, corresponding to that for an fcc (111) surface. ARPES measurements have been performed along the $\Gamma-M,\Gamma-K,\Gamma-M$TEX> symmetry lines, from which the experimental band structure of Pd(111) has been determined. The experimental band structure and work function of Pd(111) surface are found to agree well with the calculated band structure of bulk Pd and the calculated work function of Pd(111), respectively. However, the peak positions in the experimental band structure are located closer to the Fermi level than in the theoretical band structure by 0.1~0.8 eV, depending on the $\kappa$-points in the Brillouin zone. In additin, the experimental band widths are narrower than the theoretical band widths by about 0.5eV. The effects of the localized surface Pd 4d states and the Coulomb interaction between Pd 4d bulk electrons have been discussed as possible origins of such discrepancies between experiment and theory.

• International Journal of Knowledge Content Development & Technology
• /
• 제7권1호
• /
• pp.57-78
• /
• 2017

There are several statistical classification algorithms available for land use/land cover classification. However, each has a certain bias or compromise. Some methods like the parallel piped approach in supervised classification, cannot classify continuous regions within a feature. On the other hand, while unsupervised classification method takes maximum advantage of spectral variability in an image, the maximally separable clusters in spectral space may not do much for our perception of important classes in a given study area. In this research, the output of an ANN algorithm was compared with the Possibilistic c-Means an improvement of the fuzzy c-Means on both moderate resolutions Landsat8 and a high resolution Formosat 2 images. The Formosat 2 image comes with an 8m spectral resolution on the multispectral data. This multispectral image data was resampled to 10m in order to maintain a uniform ratio of 1:3 against Landsat 8 image. Six classes were chosen for analysis including: Dense forest, eucalyptus, water, grassland, wheat and riverine sand. Using a standard false color composite (FCC), the six features reflected differently in the infrared region with wheat producing the brightest pixel values. Signature collection per class was therefore easily obtained for all classifications. The output of both ANN and FCM, were analyzed separately for accuracy and an error matrix generated to assess the quality and accuracy of the classification algorithms. When you compare the results of the two methods on a per-class-basis, ANN had a crisper output compared to PCM which yielded clusters with pixels especially on the moderate resolution Landsat 8 imagery.

• 한국재료학회지
• /
• 제21권6호
• /
• pp.327-333
• /
• 2011

Nanostructured cobalt materials have recently attracted considerable attention due to their potential applications in high-density data storage, magnetic separation and heterogeneous catalysts. The size as well as the morphology at the nano scale strongly influences the physical and chemical properties of cobalt nano materials. In this study, cobalt nano particles synthesized by a a polyol process, which is a liquid-phase reduction method, were investigated. Cobalt hydroxide ($Co(OH)_2$), as an intermediate reaction product, was synthesized by the reaction between cobalt sulphate heptahydrate ($CoSO_4{\cdot}7H_2O$) used as a precursor and sodium hydroxide (NaOH) dissolved in DI water. As-synthesized $Co(OH)_2$ was washed and filtered several times with DI water, because intermediate reaction products had not only $Co(OH)_2$ but also sodium sulphate ($Na_2SO_4$), as an impurity. Then the cobalt powder was synthesized by diethylene glycol (DEG), as a reduction agent, with various temperatures and times. Polyvinylpyrrolidone (PVP), as a capping agent, was also added to control agglomeration and dispersion of the cobalt nano particles. The optimized synthesis condition was achieved at $220^{\circ}C$ for 4 hours with 0.6 of the PVP/$Co(OH)_2$ molar ratio. Consequently, it was confirmed that the synthesized nano sized cobalt particles had a face centered cubic (fcc) structure and with a size range of 100-200 nm.

• 한국분말재료학회지
• /
• 제30권1호
• /
• pp.1-6
• /
• 2023

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250℃.

• 한국분말재료학회지
• /
• 제31권3호
• /
• pp.243-254
• /
• 2024

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200℃, 1250℃, and 1275℃. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150℃) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275℃ MIM process. The HIP process can improve the quality of the alloy.

• 한국자기학회지
• /
• 제13권2호
• /
• pp.53-58
• /
• 2003

Mn층 삽입에 의한 NiFe/[FeMn/Mn]$_{80}$/NiFe 다층박막에서 열처리에 따른 교환결합세기의 변화를 조사하였다. Ta(50$\AA$)/NiFe(150 $\AA$)/[F $e_{53}$M $n_{47}$(1.25 $\AA$)/Mn(0 $\AA$, 0.11 $\AA$, 0.3 $\AA$)]$_{80}$/NiFe(90 $\AA$)/Ta(50 $\AA$) 다층박막을 이온빔 증착 스퍼터링법으로 제작하였다. 삽입한 Mn 총 두께가 0 $\AA$, 9 $\AA$, 그리고 24 $\AA$인 다층박막에 대해 조사된 fcc 결정조직의 x-선 회절세기의 비인 NiFe(111)/FeMn(111)값은 각각 0.65, 0.90, 그리고 1.5이었다. Mn이 삽입되지 않은 시료인 경우, 열처리 온도 30$0^{\circ}C$에서 상부 NiFe층의 교환결합세기는 260 Oe로 유지한 후 35$0^{\circ}C$에서 사라졌다. Mn 삽입층의 두께가 0.11 $\AA$, 0.3 $\AA$인 두개의 시료에 대해, 300 $^{\circ}C$에서 상부 NiFe층의 교환결합세기는 각각 310 Oe와 180 Oe로 유지한 후 40$0^{\circ}C$에서 모두 사라졌다. 한편 하부 NiFe층의 교환결합세기는 250 $^{\circ}C$까지 100 Oe에서 70 Oe로 감소하는 동일한 경향을 보여 주었고, 300 $^{\circ}C$ 이상부터는 증가하는 경향이 관찰되었다. 다층박막 내에 뿔뿔이 산란하여 이동하는 Mn 원자의 확산은 주로 결정 조직의 결함이 생성되고 치밀도가 약한 상부 NiFe 층에 영향을 주고 있음을 알 수 있었다. 극 초박막 형태로 Mn 원자층의 삽입에 의한 NiFe/[FeMn/Mn]80/NiFe 다층박막에서 교환결합세기와 열적 안정성 향상을 보여 주었다.

• 한국자원식물학회지
• /
• 제37권2호
• /
• pp.120-129
• /
• 2024

활성산소종은 미토콘드리아 대사활동을 통해 생성되는 반응성이 강한 산소 함유 분자로서 특히 간에서 복잡한 세포 분자와 반응하여 산화적 스트레스를 유발하는 물질이다(Choi et al., 2012). 에탄올 대사 과정에서는 ROS가 생성되어 산화스트레스를 유발하며, 과도한 에탄올은 ROS를 제거하는 항산화 시스템을 억제함으로써 지방, 단백질 또는 DNA와 같은 생체 분자에 산화 손상을 유발하여 세포를 손상시킨다(Albano, 2006; Koch et al., 2004). 본 연구에서는 오리나무 잎 추출물(AJL)에서 알코올(EtOH)로 유발된 산화적 스트레스에 대한 간세포 손상의 보호 효과를 평가하기 위해 HepG2/2E1 세포에서 EtOH와 AJL 및 대조군silymarin을 각각 처리한 후 세포생존율을 평가하고 세포독성이 없는 범위를 설정하여 활성산소종 생성량, 항산화 관련 지표(DPPH, ABTS, MDA, GSH) 및 간 손상 지표(AST 및 ALT)를 측정하였다. 알코올에 대한 간 보호 효과에서는 알코올만 처리한 군의 세포생존율이 53.8%로 감소하였으나 AJL을 함께 처리 군에서 세포생존율이 85.1%의 유의적인 증가로 간 보호효과를 확인하였다. 다음으로 AJL에서 세포 내 ROS 생성 억제능은 에탄올 처리군에서 정상군에 비해 유의적으로 ROS 생성이 증가하였으나 AJL 농도별 처리시 정상군 수준으로 ROS 생성을 현저하게 감소시켰다. MDA 함량은 에탄올 처리군에서 무처리군에 비해 유의적으로 증가하였으나 AJL 처리시 농도 의존적으로 에탄올 처리군에 비해 유의적인 차이를 보이며 MDA 함량을 감소시켰다. GSH 함량은 에탄올 처리군에서 정상군보다 유의적으로 함량이 감소하였으나 AJL 농도별 처리군 모두 에탄올 처리군에 비해 GSH 함량을 증가시켰다. 또한 간손상 지표로 활용되는 AST 및 ALT 활성 변화 확인 시, 에탄올 처리에 따른 간세포 손상군에 비하여 AJL 처리군에서는 농도 의존적으로 현저하게 감소시켰으며, 대조군silymarin과 비교하여 유사한 감소된 결과를 관찰하였다. 이상의 결과로부터 종합해 볼때AJL은 간손상에 대한 보호 및 간손상 억제 가능성을 기대할 수 있으며, 간기능 개선 효과에 대한 건강기능식품개발의 기초자료로서 활용될 수 있을 것이라 사료된다.