• 제목/요약/키워드: FBR

검색결과 88건 처리시간 0.028초

염색폐수 처리성능에 대한 호기성 고정 및 유동층 생물막공법과 회전매체를 가진 완전혼합 활성슬러지 공법의 비교연구 (A comparative study of dyeing wastewater treatment capability for Aerobic Packed/Fluidized-Bed and Moving Media Complete Mixing Activated Sludge system)

  • 김홍태;김규창
    • 한국환경과학회지
    • /
    • 제8권4호
    • /
    • pp.525-532
    • /
    • 1999
  • This study was conducted to evaluate capability of dyeing wastewater treatment for 3 type reactors. These reactors were Packed Bed Reactor(PBR), Fluidized Bed reactor(FBR) and Moving Media Complete Mixing Activated Sludge reactor(MMCMAS). Experiments of PBR and FBR were performed by various packing ratios and organic loading rates, experiments of MMCMAS were performed by various organic loading rates. In order to obtain ${SBOD}_5$ removal efficiencies of more than 90%, the F/Mv ratios of PBR, FBR, MMCMAS were 0.11 kgBOD/kgMLVSS$\cdot$d, 0.12 kgBOD/kgMLVSS$\cdot$d, and 0.37 kgBOD/kgMLSS$\cdot$d, respectively. So MMCMAS system which has more active microorganisms showed better capability of organic removal and also stronger dynamic and shock loadings than those of PBR and FBR. In PBR and FBR, the media packing ratio of 20% showed better performance of organic matters removal effciencies than 10% and 30%, but sludge production rate at media packing ratio of 30% was relatively lower than that of 10% and 20%. When more than 90% organic matters removal efficiency was obtained, the ratios of attached biomass to total biomass at PBR, FBR, MMCMAS were 89~99%, 87~98%, and 54~80%, respectively. The ratio of attached biomass to total biomass was low in MMCMAS. This was formation of thin biofilm due to shear force between rotaing disc and water. The average sludge production rates(kgVSS/kgBODrem.) of PBR, FBR and MMCMAS were 0.20, 0.29 and 0.54, respectively.

  • PDF

Effect of fermented biogas residue on growth performance, serum biochemical parameters, and meat quality in pigs

  • Xu, Xiang;Li, Lv-mu;Li, Bin;Guo, Wen-jie;Ding, Xiao-ling;Xu, Fa-zhi
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권10호
    • /
    • pp.1464-1470
    • /
    • 2017
  • Objective: This study investigated the effect of fermented biogas residue (FBR) of wheat on the performance, serum biochemical parameters, and meat quality in pigs. Methods: We selected 128 pigs (the mean initial body weight was $40.24{\pm}3.08kg$) and randomly allocated them to 4 groups (1 control group and 3 treatment groups) with 4 replicates per group and 8 pigs per pen in a randomized complete block design based on initial body weight and sex. The control group received a corn-soybean meal-based diet, the treatment group fed diets containing 5%, 10%, and 15% FBR, respectively (abbreviated as FBR5, FBR10, and FBR15, respectively). Every group received equivalent-energy and nitrogen diets. The test lasted 60 days and was divided into early and late stages. Blood and carcass samples were obtained on 60 d. Meat quality was collected from two pigs per pen. Results: During the late stage, the average daily feed intake and average daily gain of the treatment groups was greater than that of the control group (p<0.05). During the entire experiment, the average daily gain of the treatment groups was higher than that of the control group (p<0.05). Fermented biomass residue did not significantly affect serum biochemical parameters or meat quality, but did affect amino acid profiles in pork. The contents of Asp, Arg, Tyr, Phe, Leu, Thr, Ser, Lys, Pro, Ala, essential amino acids, non-essential amino acids, and total amino acids in pork of FBR5 and FBR10 were greater than those of the control group (p<0.05). Conclusion: These combined results suggest that feeding FBR could increase the average daily gain and average daily feed intake in pigs and the content of several flavor-promoting amino acids.

폴리실리콘용 유동층 반응기에서 탄화규소의 내구성과 적합성 연구 (Endurance and Compatibility of Silicon Carbide as Fluidized Bed Reactor for Poly-silicon)

  • 최균;서진원;한윤수;손민수
    • 한국표면공학회지
    • /
    • 제47권6호
    • /
    • pp.354-361
    • /
    • 2014
  • In order to utilize silicon carbide (SiC) as an inner part of fluidized bed reactor (FBR) for manufacturing poly-silicon, we have carried out the thermodynamic calculation on the overall reactions including poly-silicon synthesis and compatibility of SiC with FBR process. The resources of silicon included $SiH_4(MS)$, $SiHCl_3(TCS)$ and $SiCl_4(STC)$ and the thermodynamic yield of the FBR with MS, TCS and STC were compared each other with variable range of temperature, pressure and hydrogen to silicon ratio. The silicon yield of MS, TCS and STC were 100%, 28% and 4%, respectively, throughout the conventional FBR conditions. Silicon carbide having high hardness and strength showed strong resistance to granule collisions during the FBR process using a lab-scale reactor. And it also showed quite good compatibility with the typical FBR processes of MS and TCS resources.

세계최초 상업용 FBR 시운전경험

  • 한국원자력산업회의
    • 원자력산업
    • /
    • 제8권7호통권65호
    • /
    • pp.82-87
    • /
    • 1988
  • 프랑스의 Creys-Malville에 있는 1,200MWe급 고속증식로(FBR)의 소유자이며 운전자인 Nersa의 이사장은 이 발전소 시운전중의 경험으로 심각했던 문제는 연료저장드럼에서 발생한 나트륨의 누출사고였다고 하였다.

  • PDF

BaFBr:Eu2+ 형광체의 열발광 및 광자극발광 특성 (Thermoluminescence and Photostimulated Luminescence of BaFBr:BaFBr:Eu2+ Phosphor)

  • 도시홍;서효진;강갑중;김영국;김도성;김성환;김찬중;이병화;김완;강희동
    • 센서학회지
    • /
    • 제11권5호
    • /
    • pp.301-308
    • /
    • 2002
  • BaFBr:$Eu^{2+}$ 형광체를 제조하고, 이 형광체의 열발광 특성과 광자극발광 특성을 조사하였다. 이 형광체의 열발광 glow 피이크 온도는 35 K와 448 K였으며, 주 피이크(352 K)에 관여하는 트랩의 활성화에너지는 약 0.96 eV이었다. 또한 이 형광체의 광자극발광 스펙트럼의 파장범위는 $350{\sim}450\;nm$ 사이였으며, 광자극발광에 기여하는 트랩의 활성화에너지는 약 0.98 eV이었다. 열발광트랩과 광자극발광 트랩의 활성화에너지는 실험오차 내에서 일치하였다.

Quenching Effect in an Optical Fiber Type Small Size Dosimeter Irradiated with 290 MeV·u-1 Carbon Ions

  • Hirata, Yuho;Watanabe, Kenichi;Uritani, Akira;Yamazaki, Atsushi;Koba, Yusuke;Matsufuji, Naruhiro
    • Journal of Radiation Protection and Research
    • /
    • 제41권3호
    • /
    • pp.222-228
    • /
    • 2016
  • Background: We are developing a small size dosimeter for dose estimation in particle therapies. The developed dosimeter is an optical fiber based dosimeter mounting an radiation induced luminescence material, such as an OSL or a scintillator, at a tip. These materials generally suffer from the quenching effect under high LET particle irradiation. Materials and Methods: We fabricated two types of the small size dosimeters. They used an OSL material Eu:BaFBr and a BGO scintillator. Carbon ions were irradiated into the fabricated dosimeters at Heavy Ion Medical Accelerator in Chiba (HIMAC). The small size dosimeters were set behind the water equivalent acrylic phantom. Bragg peak was observed by changing the phantom thickness. An ion chamber was also placed near the small size dosimeters as a reference. Results and Discussion: Eu:BaFBr and BGO dosimeters showed a Bragg peak at the same thickness as the ion chamber. Under high LET particle irradiation, the response of the luminescence-based small size dosimeters deteriorated compared with that of the ion chamber due to the quenching effect. We confirmed the luminescence efficiency of Eu:BaFBr and BGO decrease with the LET. The reduction coefficient of luminescence efficiency was different between the BGO and the Eu:BaFBr. The LET can be determined from the luminescence ratio between Eu:BaFBr and BGO, and the dosimeter response can be corrected. Conclusion: We evaluated the LET dependence of the luminescence efficiency of the BGO and Eu:BaFBr as the quenching effect. We propose and discuss the correction of the quenching effect using the signal intensity ratio of the both materials. Although the correction precision is not sufficient, feasibility of the proposed correction method is proved through basic experiments.

Effects of tktA, $aroF^{FBR}$and aroL Expression in the Tryptophan-Producing Escherichia coli

  • Kim, Tae-Hyun;Namgoong, Suk;Kwak, Joon-Hyeok;Lee, Se-Yong;Lee, Heung-Shick
    • Journal of Microbiology and Biotechnology
    • /
    • 제10권6호
    • /
    • pp.789-796
    • /
    • 2000
  • In order to analyze the effects of tktA, $aroF^{FBR}$, and aroL expression in a tryptophan-producing Escherichia coli, a series of plasmids carrying the genes were constructed. Introduction of tktA, $aroF^{FBR}$, and aroL into the E. coli strain resulted in approximately 10-20 fold increase in the activities of transketolase, the feedback inhibition-resistant 3-deoxy-D-arabinoheptulsonate-7-phosphate synthase, and shikimate kinase. Expression of $aroF^{FBR}$ in the aroB mutant strain of E. coli resulted in the accumulation of 10 mM of 3-deoxy-D-arabinoheptulsonate-7-phosphate (DAHP) in the medium. Simultaneous expression of tktA and $aroF^{FBR}$ in the strain further increased the amount of excreted DAHP to 20 mM. In contrast, the mutant strain which has no gene introduced accumulated 0.5 mM of DAHP. However, the expression of tktA and $aroF^{FBR}$ in a tryptophan-producing E. coli strain did not lead to the increased production of tryptophan, but instead, a significant amount of shikimate, which is an intermediate in the tryptophan biosynthetic pathway, was excreted to the growth medium. Despite the fact that additional expression of shikimate kinase in the strain could possibly remove 90% of excreted shikimate to 0.1 mM, the amount of tryptophan produced was still unchanged. Removing shikimate using a cloned aroL gene caused the excretion of glutamate, which suggests disturbed central carbon metabolism. However, when cultivated in a complex medium, the strain expressing tktA, $aroF^{FBR}$, and aroL produced more tryptophan than the parental strain. These data indicate that additional rate-limiting steps are present in the tryptophan biosynthetic pathway, and the carbon flow to the terminal pathway is strictly regulated. Expressing tktA in E. coli cells appeared to impose a great metabolic burden to the cells as evidenced by retarded cell growth in the defined medium. Recombinant E. coli strains harboring plasmids which carry the tktA gene showed a tendency to segregate their plasmids almost completely within 24h.

  • PDF

Effects of Dietary Supplementation of Fermented Rice Bran (FRB) or Fermented Broken Rice (FBR) on Laying Performance, Egg Quality, Blood Parameter, and Cholesterol in Egg Yolk of Hy-Line Brown Laying Hens

  • Kim, Chan Ho;Park, Seong Bok;Jeon, Jin Joo;Kim, Hyun Soo;Kim, Sang Ho;Hong, Eui Chul;Kang, Hwan Ku
    • 한국가금학회지
    • /
    • 제44권4호
    • /
    • pp.235-243
    • /
    • 2017
  • This experiment was aimed at investigating the effects of dietary supplementation with fermented rice bran (FRB) or fermented broken rice (FBR) on egg-laying performance, egg quality, blood parameters, and cholesterol level in egg yolk of Hy-Line Brown egg-laying hens. Altogether, 144 Hy-Line Brown egg-laying hens (32-week-old) were randomly allocated to one of 4 dietary treatment groups, with 4 replicates per treatment. Of them, 3 treatments diets were prepared by supplementing the basal diet with 0.1% probiotics (PRO), 1% fermented rice bran (FRB), or 1% fermented broken rice (FBR) at the expense of corn. Hen-day egg production was higher (P<0.05) in PRO and FRB treatment groups than in the basal treatment groups. However, feed intake, egg weight, egg mass, and feed conversion ratio did not differ among the treatment groups. Additionally, supplementation with FRB or FBR did not affect eggshell strength, eggshell thickness, egg yolk color, and Haugh unit during the feeding trial. There was no significant difference in leukocyte count. Total cholesterol level was lower (P<0.05) in the FRB treatment group than in the basal treatment groups. Asparate aminotransferase, alanine transferase, glucose, and albumin levels were unaffected by dietary supplementation with FRB or FBR. Egg yolk cholesterol level was lower (P<0.05) in the FRB and FBR treatment groups than in the basal treatment groups. In conclusion, dietary supplementation with FRB or FBR improved egg-laying performance, and reduced the levels of total serum cholesterol and cholesterol in egg yolk of Hy-Line Brown egg-laying hens.

양전자 소멸 수명 측정에 의한 양성자 조사된 BaSrFBr : Eu 박막 특성 (Positron Annihilation Lifetime Study on the Proton-Irradiation BaSrFBr : Eu Film)

  • 임유석;이종용
    • 한국재료학회지
    • /
    • 제20권6호
    • /
    • pp.307-311
    • /
    • 2010
  • Positron annihilation lifetime spectroscopy is applied to BaSrFBr : Eu film which is used for the phosphore layer, and afterwards the reliability and self-consistency of source corrections in the positron lifetime spectroscopy is investigated using a $^{22}Na$ positron emitter covered by thin foils. The positron lifetime showed no significant change through the various proton irradiation energies. It is unusual that the measurements of the defects indicate that most of the defects were likely to have been generated by X-ray radiation. This may have resulted from the Bragg peaks of the proton characteristics. The Bragg peak does not affect the defect signals enough to distinguish the lifetimes and intensities in a material that is includes multi-grains. The lifetime ($\tau_1$) associated with positron annihilations in the Ba, Br, and Eu of the sample was about 250 ps, and due to the annihilations at F-centers or defects from the irradiated protons in sample, the lifetime ($\tau_2$) was about 500 ps.

X선 조사에 의해 (Ba, Sr) FBr : Eu 형광 물질에 생성되는 결함 특성 (Defect Analysis of Phospher (Ba, Sr) FBr : Eu by X-Ray Irradiation)

  • 신중기;이종용;배석환;김재홍;권준현
    • 한국재료학회지
    • /
    • 제18권8호
    • /
    • pp.427-431
    • /
    • 2008
  • The mechanical property of a phosphore layer was investigated by measuring the resolution (LP/mm) and by positron annihilation spectroscopy and SEM. Image plate samples containing the phosphore layer were irradiated by X-rays in a hospital numerous times over a course of several years. The LP/mm values of a (Ba,Sr)FBr : Eu image plate irradiated by X-rays varied between 2.2 and 2.0 over a period of four years. Coincidence Doppler Broadening (CDB) positron annihilation spectroscopy was used to analyze defect structures. The S parameters of the samples from hospital use varied from 0.6219 to 0.6232. There was a positive relationship between the time of exposure to the X-rays and the S parameters. Most of the defects were found to have been generated by X-rays.