• 감성과학
• /
• 제3권2호
• /
• pp.29-40
• /
• 2000

Autonomic and EEG responses were analyzed in 32 college students exposed to visual stimulation with Korean Affective Picture System (KAPS) and 36 students exposed to the International Affective Picture System (IAPS). Cardiac, electrodermal, and electrocortical measures were recorded during 30 sec of viewing affective pictures. The slides intended to elicit basic emotions (fear, anger, surprise, disgust, and sadness) were presented to subjects via Kodak slide-projector. The aim of the study was to differentiate autonomic and EEG responses associated with the same negative valence emotions elicited by KAPS and IAPS stimulation and to identify the influence of cultural relevance on physiological reactivity. The analysis of obtained results revealed significant differences in physiological responsiveness to emotionally negative valence slides from KAPS and IAPS. The typical response profile for all emotions elicited by the KAPS included HR acceleration (except surprise), and increase of electrodermal activity, slow and fast alpha blocking and fast beta power increase in EEG, which was not associated with significant asymmetry (except fast alpha in sadness). Stimulation with the IAPS evoked HR deceleration, specific electrodermal responses with relatively high tonic electrodermal activation, alpha-blocking and fast beta increase, and was accompanied also by theta power increase and marked frontal asymmetry (e.g., fast beta, theta asymmetries in sadness, fast alpha in fear). Physiological responses to fear and anger-eliciting slides from the IAPS were significantly less profound and were accompanied by autonomic and EEG changes more typical for attention rather than negative affect. Higher cardiovascular and electrodermal reactivity to fear emotion observed in the KAPS, e.g., as compared to data with the IAPS as stimuli, can be explained by cultural relevance and higher effectiveness of the KAPS in producing certain emotions such as fear in Koreans.

• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.85-91
• /
• 2002

일반적으로 시스템의 해석에 직교 함수를 이용하는 경우에는 크로네커 곱(Kronecker product)에 의하여 고차 행렬에 대한 역변환이 필요하게 되며, 이로 인하여 많은 연산 시간이 필요하게 된다. 본 연구에서는 이 문제점을 해결하고자 고속 월쉬 변환을 이용하는 방법을 제시하였고, 이렇게 함으로써 크로네커 곱에 의한 다루기 힘든 고차 행렬이나 그에 따르는 행렬들의 계산을 필요없게 함으로써 연산의 부담을 줄일 수 있게 된다. 본 연구에서는 쌍일차계의 해석을 위한 직교 함수의 유한 급수 전개 방법과 고속 월쉬 변환 방법을 비교하여 봄으로써 본 연구에서 제안한 방법의 우수성을 표현하였으며, 시뮬레이션을 통하여 고속 월쉬 변환에 와한 쌍일차계 상태 해석 결과를 표시하였다.

• 정보처리학회논문지A
• /
• 제12A권7호
• /
• pp.621-626
• /
• 2005

플래시 메모리는 비휘발성(non-volatility), 빠른 접근 속도, 저전력 소비, 그리고 간편한 휴대성 등의 장점을 가지므로 최근에 다양한 임베디드 시스템에서 많이 사용되고 있다. 그런데 플래시 메모리는 그 하드웨어 특성상 플래시 변환 계층(FTL: Flash Translation ayer)이라는 시스템 소프트웨어를 필요로 한다. 본 논문에서는 LSTAFF(Large Sate Transition Applied Fast Hash Translation Layer)라 명명된 대블록 플래시 메모리를 위한 새로운 FTL 알고리즘을 제안한다. LSTAFF는 운영체제가 다루는 데이터 섹터 크기 보다 큰 플래시 메모리의 페이지를 고려한 FTL 알고리즘이며, 기존 FTL 알고리즘과 제안될 LSTAFF를 구현하여 플래시 시뮬레이터를 이용하여 성능을 비교하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1297-1302
• /
• 2014

This paper presents modern optimization methods for determining the optimal parameters of proportional-integral-derivative (PID) controller for coupled tank systems. The main objective is to obtain a fast and stable control system for coupled tank systems by tuning of the PID controller using the Particle Swarm Optimization algorithm. The result is compared in terms of system transient characteristics in time domain. The obtained results using the Particle Swarm Optimization algorithm are also compared to conventional PID tuning method like the Ziegler-Nichols tuning method, the Cohen-Coon method and IMC (Internal Model Control). The simulation results have been simulated by MATLAB and show that tuning the PID controller using the Particle Swarm Optimization (PSO) algorithm provides a fast and stable control system with low overshoot, fast rise time and settling time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2184-2186
• /
• 2001

The research presented in this paper focuses on a method for the detection of High Impedance Fault(HIF). The method will use the fast wavelet transform and neural network system. HIF on the multi-grounded three-phase four-wires primary distribution power system cannot be detected effectively by existing over current sensing devices. These paper describes the application of fast wavelet transform to the various HIF data. These data were measured in actual 22.9kV distribution system. Wavelet transform analysis gives the frequency and time-scale information. The neural network system as a fault detector was trained to discriminate HIF from the normal status by a gradient descent method. The proposed method performed very well by proving the right state when it was applied staged fault data and normal load mimics HIF, such as arc-welder.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.47-58
• /
• 2020

Most of the reactor trips in Korean NPPs related to core protection systems were caused not because of proximity of boiling crisis and, consequently, a damage in the core, but due to particular miscalculations or component failures related to the core protection system. The most common core protection system applied in Korean NPPs is the Core Protection Calculator System (CPCS), which is installed in OPR1000 and APR1400 plants. It generates a trip signal to scram the reactor in case of low Departure from Nucleate Boiling Ratio (DNBR) or high Local Power Density (LPD). However, is a reactor trip necessary to protect the core? Or could a fast power reduction be enough to recover the DNBR/LPD without a scram? In order to analyze the online calculation of DNBR/LPD, and the use of fast power reduction as trip avoidance methodology, a concept of CPCS with fast power reduction function was developed in Matlab® Simulink using systems engineering approach. The system was validated with maximum of 0.2% deviation from the reference and the dynamic deviation was maximum of 12.65% for DNBR and 6.72% for LPD during a transient of 16,000 seconds.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.3-9
• /
• 1998

Since the introduction of hands-free phone set and teleconferencing system, acoustic echo cancellation has been a challenge for engineers. Recently many researches have shown that the best solution for the acoustic echo compensation problem is represented by an adaptive filter which iteratively tries to identify the unknown impulse response of the system from loudspeaker to microphone. In this paper, we apply the delayless subband adaptive filters and fast affine projection algorithm for the identification of room impulse response. Simulation results show 3∼8 dB more enhanced performance than conventional fullband adaptive filters or subband adaptive filters. In addition, fast affine projection algorithm shows better convergence speed at the expense of the low computational complexity than conventional LMS algorithm.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.153-163
• /
• 2004

The control objective in hard disk drives is to move head as fast as possible to target track and position the head over the center of target track in the presence of external disturbances. The external shock or disk clamping error in manufacturing process causes the disk center to deviate from the disk rotation center. The disk shift acts on the control system as disturbance and degrades severely the performance of disk drives. In this paper, we present a new controller that compensates for the periodic disturbances very fast. The disturbance compensator is arranged in parallel with the state feedback controller. To avoid the interference with the state feedback controller, the compensator creates compensation signal without the feedback of system output until steady state. The pulse type controller is included additionally for improving the transient performance due to initial state. Finally, in order to demonstrate the superior performance of the proposed compensator. we present some experimental results using a commercially available disk drive.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.367-384
• /
• 2011

This paper presents the design and experimental evaluation of fast output sampling feedback controller to minimize structural vibration of a cantilever beam using Shape Memory Alloy (SMA) wires as control actuators and piezoceramics as sensor and disturbance actuator. Linear dynamic models of the smart cantilever beam are obtained using online recursive least square parameter estimation. A digital control system that consists of $Simulink^{TM}$ modeling software and dSPACE DS1104 controller board is used for identification and control. The effectiveness of the controller is shown through simulation and experimentation by exciting the structure at resonance.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1253-1258
• /
• 2014

In this paper, we propose the fast and efficient detection method using the continuous measurement technique for the gamma-ray signal acquisition. This method is improved than the conventional method for the getting information of the radiation distribution. First, we implement the stereo radiation detection system using gamma-ray sensors and the motion controller. We apply continuous measurement technique to the gamma-ray detector and conduct gamma-ray irradiation test for the comparison of detection techniques. The results show that the continuous measurement technique has the high efficient performance than the conventional method.