• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.216-223
• /
• 2013

As the fast growth of using Internet, the requests of clients having different types and pressing loads on the server have been increased in World Wide Web. Thus the interesting issue is how to measure the real capacity of a Web Server. There have been much recent studies about measuring the capacity of web server. But the cause of Server response time delay is not just server itself but also network packet loss. To measure the practical capacity of web server, we generate scalable clients using Posix Thread, transport packets which were generated by scalable clients to the server using UDP and receive the packets which were the remain packet from network packet loss using TCP. In this paper, we propose a method to measure the practical capacity of a web server using the Scalable Clients based on Posix Thread and the transport on Application level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.483-487
• /
• 2007

In this study, we develop a new remote monitoring system for TFT-LCD panel test automation. Having to realtime monitor of Ti-Con board, this system needs to discrimination whether breakdown or not that is able to transmit processing data for engineer at long distance place using TCP/IP. The result of the development, that can be fast opposition to the breakdown and the multiple processing

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.106-109
• /
• 2004

This study designs a load balancer via direct routing that share a virtual service on a single IP address in the Linux system and suggests an efficient load balancing method to improve transmission speed in the web server cluster environment. It will increase performance and scalability with fast packet transfer and removing bottleneck problem by using TCP Splicing and Content-Aware Distributor method. This method is expected to be the noticeable technology that provides an important interface, which make application services for e-commerce effectively be applied to high-speed network infrastructure. At this time, it is required to study further on the optimum balancing method in the web server cluster environment so as to apply the hybrid (optimum load balancing method by software and hardware) method and improve the reuse of security cession based on high-speed TCP connections.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.3
• /
• pp.185-190
• /
• 2022

We propose a high speed data communication method for motor drive systems with fast control cycle in order to collect state variables of motor control without degrading control performance. Ethernet is chosen for communication device, and multi-core DSP architecture is exploited for communication processing load distribution. The communication program including network protocol stack and motor control program are assigned to two separate cores, and data between two cores are exchanged using interrupt-based inter-process communication mechanism, which enables to achieve a high-speed communication performance without degrading the motor control performance. The performance of developed communication method is demonstrated by real experiments using TCP, UDP and Raw Socket protocols in an experimental setup consisting of TI's TMS320F28388D motor control card and MS Windows PC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.31-38
• /
• 2002

In order to improve the 0.35 $mutextrm{m}$-via hole etching process the etching characteristic of the gas $C_2F_{6}$ has been analyzed. The samples were triple-layer films(TEOS/SOG/TEOS) on 8-inch wafers and the orthogonal array matrix technique was used for the process. The equipment for etching was the transformer coupled plasma (TCP) source which is a type of high density plasma(HDP). This experiment showed the etching rate for $C_2F_{6}$ was 0.8 $mutextrm{m}$/min-1.1 $mutextrm{m}$/min and the measured uniformity was under $pm$6.9% in the matrix window. The CD skew comparison between pre and post-etching was under 10% which is an outstanding results in the window of profile in anisotropic etching. There was no problem in C2F6 with the flow rate of 20sccm, but when 14sccm of $C_2F_{6}$ was supplied there was a recess problem on the inner wall of SOG film. Consequently the etching characteristic of $C_2F_{6}$ shows a fast etching rate and a very wide process window in HDP TCP.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.185-194
• /
• 2007

WiBro has become intentionally standardize as IEEE 802.16e. This WiBro service has been started by a portable internet at home as well as abroad. In this paper, an offender hacker do not direct attack on system on system that It marched an attack directly in damage system because a place oneself in mobile station of portable internet WiBro and avoid to attack hacker's system. At this time, a mobile make use of network inspection policy for back-tracking based on log data. Used network log audit, and presented TCP/IP bases at log bases as used algorithm, the SWT technique that used Thumbprint Algorithm. Timing based Algorithm, TCP Sequence number. Study of this paper applies algorithm to have been progressed more that have a speed to be fast so that is physical logical complexity of configuration of present Internet network supplements a large disadvantage, and confirm an effective back-tracking system. result of research of this paper contribute to realize a back-tracking technique in ubiquitous in WiBro internet network.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.975-983
• /
• 1999

최근 네트워크의 속도가 빨라지고 멀티미디어 데이터를 다루기 위한 기술들이 개발됨에 따라 많은 멀티미디어 응용 프로그램들이 인터넷에 등장하고 있다. 그러나 이들 응용프로그램들은 수신자에게 전송되는 영상.음성의 품질이 낮기 때문에 기대만큼 빠르게 확산되지 못하고 있다. 영상.음성의 품질이 낮은 이유는 현재 인터넷이 실시간 응용프로그램이 요구하는 만큼 빠르고 신뢰성 있게 데이터를 전송할 수 없기 때문이다. 현재 인터넷의 내부구조를 바꾸지 않고 품질을 높이기 위해 많은 연구들이 진행되고 있는데 그 중 하나는 동적으로 변화하는 인터넷의 상태에 맞게 멀티캐스트 트래픽의 전송율을 조절하는 종단간의 흐름제어이다. 본 논문은 기존의 흐름제어 기법인 IVS와 RLM의 성능을 개선시키기 위한 두 가지 흐름제어 기법을 소개한다. IVS는 송신자가 주기적으로 측정된 네트워크 상태에 따라 전송율을 일정하게 조절한다. 송신자가 하나의 데이타 스트림을 생성하는 IVS와는 달리 RLM에서는 송신자가 계층적 코딩에 의하여 생성된 여러개의 데이타 스트림을 전송하고 각 수신자는 자신의 네트워크 상태에 맞게 데이타 스트림을 선택하는 기법이다. 그러나 IVS는 송신자가 전송율을 일정하게 증가시키고, RLM은 각자의 네트워크 상태를 고려하지 않고 임의의 시간에 하나 이상의 데이타 스트림을 받기 때문에 성능을 저하시킬 수 있다. 본 논문에서는 TCP-like IVS와 Adaptive RLM이라는 두 가지 새로운 기법을 소개한다. TCP-like IVS는 송신자가 전송율을 동적으로 결정하고, Adaptive RLM은 하나 이상의 데이타 스트림을 받기 위해 적당한 시간을 선택할 수 있다. 본 논문에서는 시뮬레이션을 통해 여러 가지 네트워크 구조에서 두 가지 방식이 기존의 방식에 비하여 더욱 높은 대역폭 이용율과 10~20% 정도 적은 패킷손실율을 이룬다는 것을 보여준다.Abstract Nowadays, many multimedia applications for the Internet are introduced as the network gets faster and many techniques manipulating multimedia data are developed. These multimedia applications, however, do not spread widely and are not fast as expected at their introduction time due to the poor quality of image and voice delivered at receivers. The poor quality is mainly attributed to that the current Internet can not carry data as fast and reliably as the real-time applications require. To improve the quality without modifying the internal structure of the current Internet, many researches are conducted. One of them is an end-to-end flow control of multicast traffic adapting the sending rate to the dynamically varying Internet state. This paper proposes two flow-control techniques which can improve the performance of the two conventional techniques; IVS and RLM. IVS statically adjusts the sending rate based on the network state periodically estimated. Differently from IVS in which a sender produces one single data stream, in RLM a sender transmits several data streams generated by the layered coding scheme and each receiver selects some data streams based on its own network state. The more data streams a receiver receives, the better quality of image or voice the receiver can produce. The two techniques, however, can degrade the performance since IVS increases its sending rate statically and RLM accepts one more data stream at arbitrary time regardless of the network state respectively. We introduce two new techniques called TCP-like IVS and Adaptive RLM; TCP-like IVS can determine the sending rate dynamically and Adaptive RLM can select the right time to add one more data stream. Our simulation experiments show that two techniques can achieve better utilization and less packet loss by 10-20% over various network topologies.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1417-1420
• /
• 2004

The combination of Fast-Handoff and Hierarchical Mobile IPv6 (F-HMIPv6) allows the anticipation of the layer3 handoff such that data traffic can be efficiently redirected to the mobile node's new location before it moves there. However, after moving to the new Access Router (NAR), if the mobile node (MN) sends the Local Binding Update (LBU) to the Mobility Anchor Point (MAP) before receiving all of the buffered packet from the NAR, the MN may receive the general packet from the MAP. That is, the MN may simultaneously receive two types of packet which has different sequence number. These cause the confusion in packet order, and the MN sends the dup ack for the packet retransmission to the CN. It results in the degradation of the TCP performance. Therefore, we propose the scheme for minimizing the out-of-sequence packet in F-HMIPv6.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.21-30
• /
• 2014

Hypertension is one of the major causes of death in the world as it is related with cardiovascular or cerebrovascular disease, so it is needed to provide continuos management for blood pressure. This study selected Health Level 7 Fast Health Interoperability Resources (HL7 FHIR) as a bio-signal data exchange service model that can provide constant blood pressure management in the rapidly growing mobile health care environment. The HL7 FHIR framework developed communicates with the IEEE 11073-10407 Personal Health Device (PHD) protocol through the bluetooth Health Device Profile (HDP) between the manager (smart phone) and the agent (hemomanometer) and acquires information about blood pressure. According to the test results, it performed its tasks successfully including hypertension patients' blood pressure monitoring, management on measured records, generation of document, or transmission of measured information. Because in the actual, clinical environment, it is possible to transmit measured information through the TCP/IP protocol, it will be needed to conduct constant research on it and vitalize it in the field of mobile health care afterwards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1051-1058
• /
• 2010

Mobile IP (MIP) and SIP are considered as important technologies to provide the macro mobility in the next generation mobile convergence networks which have heterogeneous access networks. Typically, MIP and SIP are more suitable for the non-real-time TCP connections and the real-time RTP/UDP sessions respectively, hence a handset which uses both of these sessions should simultaneously apply MIP and SIP to perform the efficient mobility management. Existing multi-layered mobility management schemes focus on the signalling order of each protocol. However, simple combining of two protocols cannot provide the performance enhancement of the mobility management. In this paper, a novel multi-layered mobility management algorithm using the combination of SIP and fast MIPv6 (FMIPv6) is proposed. FMIPv6 and SIP mobility is simultaneously performed to reduce the service interrupt time and to guarantee QoS requirement. The delay model is defined to analysis the performance of the algorithm and the simulation results show the performance of the proposed algorithm.