• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.44-53
• /
• 2006

In this paper, we propose a new Active Channel Scanning scheme by scanning active channels employed by neighbor APs' with the handover counts and non overlap channel information for fast handover. Under the proposed scheme, the mobile which has finished handover to connect a new APsends the neighbor AP's channel information learned by itself during handover to the new AP. And then, the new AP relays the neighbor channel information to the old AP. It decides a priority by handover counts and non overlap channel information for building a Neighbor Channel Table(NCT), and also sends the table information to its associated mobile nodes, periodically. As a result each mobile can scan only active neighbor APs' channels when performs handover based on the referring to NCT information. Using NS-2 Simulator, we applied to supposed ACS that the result of simulation decides to sort by handover counts and non overlap channel information. we evaluate our proposed ACS scheme based on NCT along with the full scanning scheme and the selective scanning scheme. From simulation results, we show that the proposed scheme is advantageous over the other two schemes in terms of the number of scanning channels and the scanning latency.

• The KIPS Transactions:PartA
• /
• v.11A no.7 s.91
• /
• pp.511-520
• /
• 2004

A peer-to-peer model is very useful in solving the server link bottleneck problem of a client-server model. In this work, we discuss the problems of distributing multimedia content over peer-to-peer network. We focus on two problems in peer-to-peer media content distribution systems. The first is the transmission scheduling of the media data for a multi-source streaming session. We present a sophisticated scheduling scheme called fixed-length slotted scheduling, which results in minimum buffering delay. The second problem is on the fast distribution of media content in the peer-to-peer system that is self-growing. We propose a mechanism accelerating the speed at which the system's streaming ca-pacity increases, called FAST.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1997-2015
• /
• 2011

In this paper, we propose the enhanced network-based mobility management protocol, called enhanced proxy mobile ipv6 (E-PMIPv6), which can provide mobile nodes (MNs) with a fast and efficient mobility service in PMIPv6 domain. The proposed scheme can provide a fast and efficient mobility service to MNs and also the strength of network scalability and stability to an access network by proposing the dynamic virtual hierarchical network architecture. In addition, the pre-authentication procedure for an MN, based on the information of neighbor mobile access gateway (MAG) list in the enhanced-policy server (E-PS), is proposed to support seamless handover by reducing MN's handover latency. Through performance evaluations of numerical analyses and simulations, we have confirmed and verified the superiority of the proposed scheme compared to the conventional proxy mobile ipv6 (PMIPv6).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.623-629
• /
• 2004

In this paper, a Efficient method for the mixed image separation is presented using independent component analysis and the new fast expectation-maximization(EM) algorithm. In general, the independent component analysis (ICA) is one of the widely used statistical signal processing scheme in various applications. However, it has been known that ICA does not establish good performance in source separation by itself. So, Innovation process which is one of the methods that were employed in image separation using ICA, which produces improved the mixed image separation. Unfortunately, the innovation process needs long processing time compared with ICA or EM. Thus, in order to overcome this limitation, we proposed new method which combined ICA with the New fast EM algorithm instead of using the innovation process. Proposed method improves the performance and reduces the total processing time for the Image separation. We compared our proposed method with ICA combined with innovation process. The experimental results show the effectiveness of the proposed method by applying it to image separation problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.459-470
• /
• 2008

In this paper, we propose a fast ME (motion estimation) algorithm for MPEG-4 to H.264 Transcoder. Whereas 2 modes ($8{\times}8$, $16{\times}16$) are used for ME in MPEG-4 simple profile, ME using 7 modes is supported for further enhanced coding efficiency in H.264. The transcoding speed is affected dominantly by the computational complexity of encoder part in transcoder, where ME module of H.264 encoder has high complexity due to using 7 modes. In order to increase the speed of transcoding between MPEG-4 and H.264, we use 3 PMVs (predicted motion vectors) and the mode information of MBs (macroblocks) provided from the decoder part of transcoder. Since the proposed 3 PMVs are very close to an optimal motion vector, and we consider only some restricted modes according to the MB information transferred from decoder part, the proposed scheme can speed up the transcoding procedure without loss of image quality. We show experimental results which demonstrate the effectiveness of the proposed algorithm, where performance of our scheme is compared with that of the conventional fast algorithm for H.264.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1175-1181
• /
• 2011

For vertical handover, the part for the homogeneous handover needs to be modified, which allows users to utilize the various wireless access schemes with a mobile terminal with PFMIPv6. In this paper, we considered a cross-layer design for fast vertical handover between MIH and PFMIPv6, where two MIH-layer messages are suggested to reduce handover latency and integrate between MIH and PFMIPv6 efficiently. The proposed scheme is evaluated with handover latency. The results show that the proposed handover procedure reduces handover latency compared with the existing one.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.895-903
• /
• 2012

This paper presents a fast switching direct torque control (FS-DTC) using only a single DC-link current sensor. In FS-DTC, six new active voltage complex space vectors (CSVs) are synthesized by the conventional active voltage space vectors (SVs). The corresponding sectors are rotated in the anticlockwise direction by 30 degrees. A selection table is defined to select the CSVs. Based on the "Different Phase Mode", the output sequence of the selected CSV is optimized. Accordingly, a reconstruction method is proposed to acquire the phase currents. The core of the FS-DTC is that all of the three phase currents can be reliably reconstructed during every two sampling periods, which is the result of the fast switching between different phases. The errors between the reconstructed and actual currents are strictly limited in one sampling period. The FS-DTC has the advantages of the standard DTC scheme such as simple structure, quick torque response and robustness. As can be seen in the analysis, the FS-DTC can be thought of as an equivalent standard DTC scheme with 86.6% of the maximum speed, 173.2% of the torque ripple, and 115% of the response time of the torque. Based on a dSPACE DS1103 controller, the FS-DTC is implemented in an induction machine drive system. The results verify the effectiveness of the FS-DTC.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.561-564
• /
• 2004

The motion estimation which requires huge computation consumes large power in a video encoder. Although a number of fast-search algorithms are proposed to reduce the power consumption, the smaller the computation, the worse the performance they have. In this paper, we propose an architecture that a low energy management scheme can be applied with several fast-search algorithm. In addition. we show that ECVH, a software scheduling scheme which dynamically changes the search algorithm, the operating frequency, and the supply voltage using the remaining slack time within given power-budget, can be applied to the architecture, and show that the power consumption can be reduced.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.474-480
• /
• 2013

In orthogonal frequency division multiplexing system (OFDM), rapid channel variation caused by fast moving receiver leads to a loss of subcarrier orthogonality which results in inter-carrier interference (ICI) and receiver performance degradation. In conventional receivers, performance is enhanced by estimating ICI and removing it from received signals. In this paper, an ICI reduction scheme using a time-domain mask and adding is proposed. The proposed scheme is applied to DVB-T receiver to prove the Doppler mobile performance enhancement.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.62-67
• /
• 1997

This paper reprdsents a new scheme of neural network control system analysis the robustues of robot manipulator using digital signal processors. Digtal signal processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of variables. Digital version of most advanced control algorithms can be defined as sums and products of measured variables, thus it can be programmed and executed through DSPs. In additions, DSPs are a s fast in computation as most 32-bit micro-processors and yet at a fraction of their prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. Durng past decade it was proposed the well-established theorys for the adaptive control of linear systems, but there exists relatively little general theory for the adaptive control of nonlinear systems. The proposed neuro network control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method.