Kim, Tae-Hwan;Kwon, Young-Sam;Chung, Heeyoung;Lee, In-Mo
Journal of Korean Tunnelling and Underground Space Association
/
v.20
no.6
/
pp.1049-1060
/
2018
Soil conditioning is one of the key factors for successfull tunnel excavations utilizing the earth pressure-balanced (EPB) shield tunnel boring machine (TBM) by increasing the tunnel face stability and extraction efficiency of excavated soils. In this study, conditioning agents are mixed with the weathered granite soils which are abundant in the Korean peninsula and the workability of the resulting mixture is evaluated through the slump tests to derive and propose the most suitable conditioning agent as well as the most appropriate agent mix ratios. However, since it is cumbersome to perform the slump tests all the time either in the laboratory or in-situ, a simpler test may be needed instead of the slump test; the fall cone test was proposed as a substitute. In this paper, the correlation between the slump value obtained from the slump test and the cone penetration depth obtained from the proposed fall cone test was obtained. Test results showed that a very good correlation between two was observed; it means that the simpler fall cone test can be used to assess the suitability of the conditioned soils instead of the more cumbersome slump test.
Journal of the Korea Academia-Industrial cooperation Society
/
v.20
no.9
/
pp.150-155
/
2019
Cavitation refers to a phenomenon in which empty spaces occur in a fluid due to changes in pressure and a velocity. When a liquid moves at a high speed, the pressure drops below the vapor pressure, and vapor bubbles are generated in the liquid. This study used CFD to analyze the flow of fluid machinery used in marine and offshore plants. The goals are to ensure the validity of the analysis method for marine propellers in an open water test, to increase the forward ratio, and to use FLUENT to understand the flow pattern due to cavitation. A three-dimensional analysis was performed and compared with experimental data from MOERI. The efficiency was highest at advance ratios of 0.7 - 0.8. Thrust was generated due to the difference between the pressure surface and the suction surface, and it was estimated that bubbles would be generated in the vicinity of the back side surface rather than the face side of the propeller, resulting in more cavitation. The cavitation decreased sharply as the advance ratio increased. The thrust and torque coefficients were comparable to those of the MOERI experimental data except at the advance ratio of 1, which showed a difference of less than 5%. Therefore, it was confirmed that CFD can evaluate an open water propeller test.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.12
no.4
/
pp.336-342
/
2019
With the entry of an aging society, the average life span of accreditation has been extended. Therefore, interest in the appearance of men and women in modern society has increased. It is the wrinkles of the face that can judge the most outwardly. People tend to have various kinds of treatments to have a clean, wrinkle-free and resilient healthy skin regardless of sex. There is a lot of practice of lifting procedures in one of the procedures. A suture using a melting thread is a method of lifting by squeezing it into the skin as a non-incision type centering on a region where the thread can be fixed in the skin by injecting it into the subcutaneous fat layer. To evaluate the lifting efficacy of Cog - type suture for the improvement of skin wrinkles, preclinical experiments were conducted. We developed a wrinkle evaluation program using Labview. Data from preclinical experiments were used at 8 weeks after suturing. The average wrinkle depth was 415.6 mm in the control group. At 8 weeks, the depth of wrinkles was deepened to 888.3mm due to the aging process of the control group. On the other hand, the depth of the wrinkles before surgery was 640.3 mm in the suture group. It was confirmed that the depth of wrinkles decreased to 566.5mm at 8th week after the suture operation.
In the present life of us, the challenges, we face essentially, relate to human quality and personality. It is a fact that can be easily understood through a situation of present education and the law. The research in the eastern philosophy of the 'personality' has been handled in regard to Yangmingxue, but a practical principle of education can be also found in an aspect of Zhuzixue indeed. That is Zhu'zi's study of 'gaining knowledge by the study of things' which was criticized by Yangming. This paper is to examine that with 'gaining knowledge by the study of things', which is known as study of 'zhi', we can find the practical principle which is applied to the education of personality. This research is to examine the relationship between 'Zundexing(尊德性)' and 'Daowenxue(道問學)' which are characters of cultivating study of Zhuzixue and the characteristics of the study of Zhu'zi by examining 'gaining knowledge by the study of things', the main method of 'Daowenzue'. This study, then, to show the meaning of study of 'gaining knowledge by the study of things' exploring prncan appropriate education of personality in this time drawing practical principle which can be applied to education of personality through the process and principle of 'taking the objective principles(格物)' and 'achieving morl self-Congnition(致知)'. Then, through the process and principles of 'taking the objective principles' and 'achieving morl self-Congnition ', this paper explore factors of the education of personality and the principles that can be applied in the education field, so as to reveal the significance of studying 'gaining knowledge by the study of things' in terms of the education of personality for this age.
Journal of the Korea Institute of Information Security & Cryptology
/
v.21
no.6
/
pp.183-190
/
2011
In this paper, we propose a prototype system for abnormal sound detection and identification which detects and recognizes the abnormal situations by means of analyzing audio information coming in real time from CCTV cameras under surveillance environment. The proposed system is composed of two layers: The first layer is an one-class support vector machine, i.e., support vector data description (SVDD) that performs rapid detection of abnormal situations and alerts to the manager. The second layer classifies the detected abnormal sound into predefined class such as 'gun', 'scream', 'siren', 'crash', 'bomb' via a sparse representation classifier (SRC) to cope with emergency situations. The proposed system is designed in a hierarchical manner via a mixture of SVDD and SRC, which has desired characteristics as follows: 1) By fast detecting abnormal sound using SVDD trained with only normal sound, it does not perform the unnecessary classification for normal sound. 2) It ensures a reliable system performance via a SRC that has been successfully applied in the field of face recognition. 3) With the intrinsic incremental learning capability of SRC, it can actively adapt itself to the change of a sound database. The experimental results with the qualitative analysis illustrate the efficiency of the proposed method.
As of 2020, due to the influence of fine dust from China and domestic dust, the cloudy sky of Korea has become a daily routine not only in spring but also in autumn/winter. In 2013, the International Cancer Institute under the World Health Organization designated fine dust as a group 1 carcinogen that has been confirmed to be carcinogenic to humans. The purpose of this study is to theoretically review 5 fine dust-related design studies, by analyzing the case of three types of wearable air purifiers on the market, it is to propose an improved open wearable air purifier. As a verification method, a working prototype was produced to measure the amount of fine dust reduction. Therefore, this study derived three design insights of wearable air cleaner through case analysis. First, it maximizes openness by minimizing the area touching the face. Second, the nozzle where the air comes out should be close to the respiratory organ. Third, position of the motor is to be as far away as possible from the ear considering the noise. Based on this, I suggested an open-type wearable air purifier design that maximizes the user openness and improves the wearing comfort. I hope that it will be an opportunity to increase the coverage of wearable air cleaner and protect the respiratory health of users.
Journal of Korean Tunnelling and Underground Space Association
/
v.23
no.1
/
pp.1-12
/
2021
In the design of a tunnel boring machine (TBM), the excavation efficiency of the equipment depends on the design of the cutter head, which is directly in contact with the ground. Especially, the allocation of disc cutter is crucial issue. Disc cutters can be divided into center cutter zone, inner cutter zone and transition cutter zone depending on where they are placed. Many studies have been conducted to identify optimal cutting conditions for face cutters. However, research to determine the optimal cutting conditions for the transition cutter has been relatively incomplete. In this study, to identify the optimal cutting conditions for the transition cutter, numerical analysis using discrete element method was performed, and the specific energy curve according to the angle between the transition cutters was drawn to find out the optimum cutting conditions. The results show that the angle between the transition cutters showing minimum specific energy in the transition cutter zone is 9°. Transition cutter zone was divided into three sections according to the slope angle of the transition cutter. It is also found that, the greater the slope angle of the transition cutter. This finding shows good agreement with the present design of transition cutter zone.
Introduction : OMFT is a therapeutic technique based on sensorimotor, motor control and motor learning, and its major goal is to improve oral motor function. The oral motor conceptual hierarchical development is divided into 5 steps: 1) sensorimotor, 2) movement integration, 3) structural movement, 4) functional oral motor, and 5) comprehensive oral motor. Discussion : The OMFT consists of 3 techniques, 10 categories, and 50 sub-item. 1) Warming up technique: 2 categories, 12 sub-item, warming up by sensory awareness and adaptation, therapy situation adaptation, neck movement; 2) Key point technique: 7 categories, 30 sub-item, oral motor facilitation and increasing chewing skill by direct stroke of oral structures such as the face, lips, cheeks, gum, jaws, and tongue; 3) Application technique: 1 category, 8 sub-item, facilitate food intake and swallowing. Conclusion : The goal of this article is to introduce 3 techniques, 50 sub-item of OMFT, as a comprehensive oral motor therapy method, for application to clients. This article provides information that will help oral motor specialists in treating clients with oral motor problems more effectively and professionally.
The Journal of the Convergence on Culture Technology
/
v.8
no.1
/
pp.427-434
/
2022
The purpose of this study is to create a self-portrait that provides an immersive experience that immerses the viewer into the problem of self-awareness. We propose a method to implement an interactive self-portrait by using audio and image information obtained from viewers. The viewer's voice information is converted into text and visualized. In this case, the viewer's face image is used as pixel information composing the text. Text is the result of a mixture of one's own emotions, imaginations, and intentions based on personal experiences and memories. People have different interpretations of certain texts in different ways.The proposed digital self-portrait not only reproduces the viewer's self-consciousness in the inner aspect by utilizing the intertextuality of the text, but also expands the meanings inherent in the text. Intertextuality in a broad sense refers to the totality of all knowledge that occurs between text and text, and between subject and subject. Therefore, the self-portrait expressed in text expands and derives various relationships between the viewer and the text, the viewer and the viewer, and the text and the text. In addition, this study shows that the proposed self-portrait can confirm the formativeness of text and re-create spatial and temporality in the external aspect. This dynamic self-portrait reflects the interests of viewers in real time, and has the characteristic of being updated and created.
Purpose: On August 16, 2021, the Taliban established the Taliban regime after conquering capital Kabul of the Afghan by using the strong alliance of international terrorist organizations. The Taliban carried out terrorism targeting the Korean people, including the kidnapping of Kim Seon-il in 2004, the abduction of a member of the Saemmul Church in 2007, and the attack on Korean Provincial Reconstruction Team in 2009. Therefore, this research has shown the possibility of Taliban terrorism in Korea. Method: Based on the statistical data on terrorism that occurred in Afghanistan, Taliban's various terrorist activities such as tactics, strategies, and weapons are examined. Consequently, the target facilities and the type of terrorist attacks are analyzed. Result: The Taliban are targeting the Afghan government as their main target of attack, and IS and the Taliban differ in their selection of targets for terrorism. Conclusion: From the result of this research, we recommend Korea need to reinforce the counter terrorism system in soft targets. Because If the Taliban, which has seized control of Afghanistan, and IS, which has established a worldwide terrorism network, cooperate to threaten domestic multi-use facilities with bombing, the Republic of Korea may face a terrorist crisis with insufficient resources and counter-terrorism related countermeasures.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.