• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.23-29
• /
• 1989

In order to investigate developmental habit and morphology of maize tillers, time and location of tiller development. number of tillers per plant, tiller angle, height and diameter of tillers and root systems of tillers were examined under field condition for maize with tillers. Materials used were mostly from Korean local lines and a few lines from other countries were also included for comparison. The time of the first tiller development was about 18 to 20 days after emergence when planted on May in Yusong. The second tiller appeared about 4 to 5 days after the first tiller appeared. The tiller number per plant varied with lines and hybrids and ranged from two to ten. The location of tiller development was usually basal nodes of the main stem. Each tiller appeared to have its own root system. The angle between tillers and main stem was variable depending upon the maizes and the tiller angle could be classified into three categories. The height of tillers was also variable and seemed to be under genetic control. The most productive tillers were found among the Korean local derivatives.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.312-320
• /
• 2005

The purpose of this study was to evaluate the polymerization contraction and the microhardness of compostie resin($Supreme^{(R)}$, Filtek $Flow^{(R)}$, 3M-ESPE, USA) according to irradiation modes of LED curing unit(Elipar $Freelight^{(R)}$, 3M-ESPE, USA). The strain guage method was used for determination of polymerization contraction. Sample were divided by 6 groups according to curing modes and filling method. Group A: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 10seconds curing, Group B: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds curing, Group C: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds soft start curing, Group D: $Supreme^{(R)}$ only, 10seconds curing, Group E: $Supreme^{(R)}$ only, 15seconds curing, Group F: $Supreme^{(R)}$ only, 15seconds soft start curing. Preparations of acrylic molds were followed by filling and curing. Strain guage attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Repeated measures ANOVA and Tukey test. The results of the present study are as follows: 1. In flowable resin liner group, soft start curing group was not found decrease of polymerization contraction. But, In Supreme only filling group, the lowest polymeriation contraction was found in soft start curing group. 2. 10 seconds curing group showed statistically significant reduction of polymerization contraction compared with 15 seconds curing group(p<0.05). 3. The microhardness values of each group not revealed significant difference(p>0.05). But, lower surface microhardness was not reached 80% of upper surface microhardness.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.1
• /
• pp.96-107
• /
• 2015

This study presents a comprehensive account of the flora of hydrophytes and hygrophytes on Jeju Island. This approach aims to contribute to fundamental information about the conservation of plant diversity in wetlands. Field surveys were carried out from May of 2010 to September of 2014 in various types of wetlands on Jeju Island. A total of 189 taxa, including 52 families, 98 genera, 181 species, 6 varieties, 2 forma and 189 taxa, were found. Among them, 99 taxa (38 families, 60 genera, 96 species and 3 varieties) were hydrophytes and 90 taxa (23 families, 45 genera, 85 species, 3 varieties and 2 forma) were hygrophytes. In addition, Eleocharis${\times}$yezoensis H. Hara (Cyperaceae) was newly added to the flora of Korea. The protected wild plants designated by the Ministry of the Environment were 5 taxa, including Brasenia schreberi J. F. Gmel. and Dysophylla yatabeana Makino. The endangered species found included one Critically Endangered Species (i.e., Mankyua chejuense B.-Y. Sun, M. H. Kim & C. H. Kim), 5 Endangered Species (e.g., Lysimachia leucantha Miq.) and 7 Vulnerable Species (e.g., Tillaea aquatica L.). The floristic regional indicator plants found in this area were 44 taxa comprising 10 taxa of grade V, 7 taxa grade IV, 15 taxa of grade III, 5 taxa of grade II, and 7 taxa of grade I. The identified naturalized plants were 10 taxa; 8 families, 8 genera, 9 species and 1 variety. In the wetlands on Jeju Island, high plant species diversity was shown, and a number of rare plants and phytogeographically important plants were found. For these reasons, we consider that the wetlands on Jeju Island are very important areas from a botanical point of view. It is necessary to establish specific protection and maintenance policies in an effort to conserve these wetlands and species.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.268-277
• /
• 2014

This study assessed microbiological hazards at postharvest stage of dropwort farms (A, B, C, D, E, F, G, H, I) located in 4 different areas in Korea. The samples were assessed for sanitary indication bacteria (total aerobic bacteria, coliform, and Escherichia coli) and pathogenic bacteria (Escherichia coli O157:H7, Listeria monocytogenes, Staphylococcus aureus and Bacillus cereus). Total aerobic bacteria and coliform in 9 dropwort farms were detected at the levels of 0~7.00 and 0~4.25 log CFU/g, mL, of $100cm^2$. In particular, microbial contamination in worker's hand showed higher than cultivation environment factors. Escherichia coli was detected in several farms of soil, irrigation water, washing water and worker's hand and also, dropwort in these farms was contaminated with E. coli (positive reaction). In case of pathogenic bacteria, B. cereus was detected at the highest levels in soil. S. aureus was detected qualitatively from only one sample of dropwort washed by water. E. coli O157:H7 and L. monocytogenes were not detected. Although dropwort pass through 2 process (trimming and washing), the microbial contamination was not differ significantly before and after which indicates that current washing system was not effect on reduction of microorganism. From these results, the postharvest environment and workers have been considered as cross-contamination factors. Thus, processing equipments and personal hygiene should be managed to reduce the microbial contamination of dropwort. Accordingly management system such as good agricultural practices (GAP) criteria is needed for the safety of dropwort

• Korean Journal of Agricultural Science
• /
• v.7 no.1
• /
• pp.12-26
• /
• 1980

A new, improved maize varieties are greatly needed to meet the national demand for the maize, and a new germplasm should be investigated to supply necessary breeding materials for the required maize breeding. The Korean local maize lines, which has never been wholly studied for the purpose of breeding should be enough to supply such breeding materials at least in Korea. The objectives of this study were to maintain useful Korean local lines, to investigate good plant characters and to analyze the Korean local maize lines in the respect of genetic make-up. A total of 820 lines and 200 lines were used for the present study. Lines to maintain were planted at experimental farm of the Crop Experiment Station, Office of Rural Development, Suwon and the lines to study genetic make-up were planted in Dae-jon. The summarized results are as follows : 1. A total of 1200 lines from 820 collections were sibbed for future use. 2. Two hundred collection were sibbed, selfed and testcrossed for genetic study in 1980. 3. Ten lines were surely confirmed as resistant lines to virus disease epidemic in most introduced maize varieties. 4. A dozen Lines were having three to four ears per plant. 5. Five lines were showing three to four tillers per plant. 6. One of the most significant and important finding through the study was to obtain the lines with three to four tillers bearing all together eight to nine ears. The lines of multi-ears and multi-tillers must have great breeding potential for the future use. 7. A great variation was observed in the tasselling days, 100 kernel weight and protein content. 8. From the genetic study of local maize lines for plant height and 100 kernel weight, the following findings were obtained. a. On the average six percent of inbreeding depression expressed in percent decrease over sibbed counterpart were found for the plant height. b. Fourty percent of heterosis expressed in percent increase over sibbed counterpart were observed in the plant height. c. The homogeneity or degree of homozygosity calculated from heterosis minus inbreeding depression was on the average 34 percent for plant height. d. The average inbreeding depression expressed in percent decrease over sibbed counterpart was 15 percent for 100 kernel weight. e. The average heterosis expressed in percent increase over sibbed counterpart was 43 percent for 100 kernel weight. f. The degree of homozygosity calculated from the heterosis minus inbreeding depression was 28 percent for 100 kernel weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.3
• /
• pp.1-40
• /
• 1965

To measure variations in some of the important agronomic characteristics of rice varieties under shifting of seedling dates, this study has been carried out at the Paddy Crop Division of Crop Experiment Station(then Agricultural Experiment Station) in Suwon for the period of three years 1958 to 1960. The varieties used in this study were Kwansan, Suwon ＃82, Mojo, Paltal and Chokwang, which have the different agronomic characteristics such as earliness and plant type. Seeds of each variety were sown at 14 different dates in 10-day interval starting on March 2. The seedlings were grown on seed bed for 30, 40, 50, 60, 70 and 80 days, respectively. The results of this study are as follows: A. Heading dates. 1. As the seeding date was delayed, the heading dates was almost proportionally delayed. The degree of delay was higher in early varieties and lower in late varieties and the longer the seedling stage, the more delayed the heading date. 2. Number of days to heading was proportionally lessened as seeding was delayed in all the varieties but the magnitude varied depending upon variety. In other words, the required period for heading in case of late planting was much shortened in late variety compared with early one. Within a variety, the number of days to heading was less shortened as the seedling stage was prolonged. Early variety reached earlier than late variety to the marginal date for the maximum shortening of days to heading and the longer the seeding stage, the limitted date came earlier. There was a certain limit in seeding date for shortening of days to heading as seeding was delayed, and days to heading were rather prolonged due to cold weather when seeded later than that date. 3. In linear regression equation, Y=a+bx obtained from the seeding dates and the number of days to heading, the coefficient b(shortening rate of days to heading) was closely correlated with the average number of days to heading. That is, the period from seeding to heading was more shortened in late variety than early one as seeding was delayed. 4. To the extent that the seedling stage is not so long and there is a linear relationship between delay of seeding and shortening of days to heading, it might be possible to predict heading date of a rice variety to be sown any date by using the linear regression obtained from variation of heading dates under the various seeding dates of the same variety. 5. It was found out that there was a close correlation between the numbers of days to heading in ordinary culture and the other ones. When a rice variety was planted during the period from the late part of March to the middle of June and the seedling ages were within 30 to 50 days, it could be possible to estimate heading date of the variety under late or early culture with the related data of ordinary culture. B. Maturing date. 6. Within (he marginal date for maturation of rice variety, maturing date was proportionally delayed as heading was delayed. Of course, the degree of delay depended upon varieties and seedling ages. The average air temperature (Y) during the ripening period of rice variety was getting lower as the heading date. (X) was delayed. Though there was a difference among varieties, in general, a linear regression equation(y=25.53-0.182X) could be obtained as far as heading date were within August 1 to September 13. 7. Depending upon earliness of a rice variety, the average air temperature during the ripening period were greatly different. Early variety underwent under 28$^{\circ}C$ in maximum while late variety matured under as low as 22$^{\circ}C$. 8. There was a highly significant correlation between the average air temperature (X) during the ripening period, and number of day (Y) for the maturation. And the relationship could be expressed as y=82.30-1.55X. When the average air temperature during the period was within the range of 18$^{\circ}C$ to 28$^{\circ}C$, the ripening period was shortened by 1.55 days with increase of 1$^{\circ}C$. Considering varieties, Kwansan was the highest in shortening the maturing period by 2.24 days and Suwon ＃82 was the lowest showing 0.78 days. It is certain that ripening of rice variety is accelerated at Suwon as the average air temperature increases within the range of 18$^{\circ}C$ to 28$^{\circ}C$. 9. Between number of days to heading (X) related to seeding dates and the accumulated average air temperature (Y) during the ripening period, a positive correlation was obtained. However, there was a little difference in the accumulated average air temperature during the ripening period even seeding dates were shifted to a certain extent. C. Culm- and ear-lengths. 10. In general all the varieties didn't show much variation in their culm-lengths in case of relatively early seeding but they trended to decrease the lengths as seeding was delayed. The magnitude of decreasing varied from young seedlings to old ones. Young seedlings which were seeded during May 21 to June 10 didn't decrease their culm-lengths, while seedlings old as 80 days decreased the length though under ordinary culture. 11. Variation in ear-length of rice varieties show the same trend as the culm-length subjected to the different seeding dates. When rice seedlings aged from 30 to 40 days, the ear-length remained constant but rice plants older than 40 days obviously decreased their ear-lengths. D. Number of panicles per hill. 12. The number of panicles per hill decreased up to a certain dates as seeding was delayed and then again increased the panicles due to the development of numerous tillers at the upper internodes. The seeding date to reach to the least number of panicles of rice variety depended upon the seedling ages. Thirty- to 40-day seedlings which were seeded during May 31 to June 10 developed the lowest number of panicles and 70- to 80-day seedlings sown for the period from April 11 to April 21 reached already to the minimum number of panicles. E. Number of rachillae. 13. To a certain seeding date, the number of rachillae didn't show any variation due to delay of seeding but it decreased remarkably when seeded later than the marginal date. 14. Variation in number of rachillae depended upon seedling ages. For example, 30- to 40-day old seedlings which, were originally seeded after May 31 started to decrease the rachillae. On the other hand, 80-day old seedlings which, were seeded on May 1 showed a tendency to decrease rachillae and the rice plant sown on May 31 could develop narrowly 3 or 4 panicles. F. Defective grain and 1.000-grain weights. 15. Under delay of the seeding dates, weight of the defective grains gradually increased till a certain date and then suddenly increased. These relationships could be expressed with two different linear regressions. 16. If it was assumed that the marginal date for ripening was the cross point of these two lines, the date seemed. closely related with seedling ages. The date was June 10- in 30- to 40-day old seedlings but that of 70- to 80-day old seedlings was May 1. Accordingly, the marginal date for ripening was getting earlier as the seedling stage was prolonged. 17. The 1.000-grain weight in ordinary culture was the heaviest and it decreased in both early and late cultures. G. Straw and rough rice weights. 18. Regardless of earliness of variety, rice plants under early culture which were seeded before March 22 or April 1 did not show much variation in straw weight due to seedling ages but in ordinary culture it gradually decreased and the degree was became greater in late culture. 19. Relationship between seeding dates (X) and grain weight related to varieties and seedling ages, could be expressed as a parabola analogous to a line (Y=77.28-7.44X$_1$-1.00lX$_2$). That is, grain yield didn't vary in early culture but it started to decrease when seeded later than a certain date, as seeding was delayed. The variation was much greater in cases of late planting and prolongation of seedling age. 20. Generally speaking, the relationship between grain yield (Y) and number of days to heading (X) was described with linear regression. However, the early varieties were the highest yielders within the range of 60 to 110, days to heading but the late variety greatly decreased its yield since it grows normally only under late culture. The grain yield, on the whole, didn't increase as number of days to heading exceeded more than 140 days.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.3
• /
• pp.389-404
• /
• 2000

This study was designed to determine the cost and measurement of nursing care hours for hospice patients hostpitalized in one university hospital. 314 inpatients in the hospice unit 11 nursing manpower were enrolled. Study was taken place in C University Hospital from 8th to 28th, Nov, 1999. Researcher and investigator did pilot study for selecting compatible hospice patient classification indicators. After modifying patient classification indicators and nursing care details for general ward, approved of content validity by specialist. Using hospice patient classification indicators and per 5 min continuing observation method, researcher and investigator recorded direct nursing care hours, indirect nursing care hours, and personnel time on hospice nursing care hours, and personnel time on hospice nursing care activities sheet. All of the patients were classified into Class I(mildly ill), Class II (moderately ill), Class III (acutely ill), and Class IV (critically ill) by patient classification system (PCS) which had been carefully developed to be suitable for the Korean hospice ward. And then the elements of the nursing care cost was investigated. Based on the data from an accounting section (Riccolo, 1988), nursing care hours per patient per day in each class and nursing care cost per patient per hour were multiplied. And then the mean of the nursing care cost per patient per day in each class was calculated. Using SAS, The number of patients in class and nursing activities in duty for nursing care hours were calculated the percent, the mean, the standard deviation respectively. According to the ANOVA and the $Scheff{\'{e}$ test, direct nursing care hours per patient per day for the each class were analyzed. The results of this study were summarized as follows : 1. Distribution of patient class : class IN(33.5%) was the largest class the rest were class II(26.1%) class III(22.6%), class I(17.8%). Nursing care requirements of the inpatients in hospice ward were greater than that of the inpatients in general ward. 2. Direct nursing care activities : Measurement ${\cdot}$ observation 41.7%, medication 16.6%, exercise ${\cdot}$ safety 12.5%, education ${\cdot}$ communication 7.2% etc. The mean hours of direct nursing care per patient per day per duty were needed ; 69.3 min for day duty, 64.7 min for evening duty, 88.2 min for night duty, 38.7 min for shift duty. The mean hours of direct nursing care of night duty was longer than that of the other duty. Direct nursing care hours per patient per day in each class were needed ; 3.1 hrs for class I, 3.9 hrs for class II, 4.7 hrs for class III, and 5.2 hrs for class IV. The mean hours of direct nursing care per patient per day without the PCS was 4.1 hours. The mean hours of direct nursing care per patient per day in class was increased significantly according to increasing nursing care requirements of the inpatients(F=49.04, p=.0001). The each class was significantly different(p<0.05). The mean hours of direct nursing care of several direct nursing care activities in each class were increased according to increasing nursing care requirements of the inpatients(p<0.05) ; class III and class IV for medication and education ${\cdot}$ communication, class I, class III and class IV for measurement ${\cdot}$ observation, class I, class II and class IV for elimination ${\cdot}$ irrigation, all of class for exercise ${\cdot}$ safety. 3. Indirect nursing care activities and personnel time : Recognization 24.2%, house keeping activity 22.7%, charting 17.2%, personnel time 11.8% etc. The mean hours of indirect nursing care and personnel time per nursing manpower was 4.7 hrs. The mean hours of indirect nursing care and personnel time per duty were 294.8 min for day duty, 212.3 min for evening duty, 387.9 min for night duty, 143.3 min for shift duty. The mean of indirect nursing care hours and personnel time of night duty was longer than that of the other duty. 4. The mean hours of indirect nursing care and personnel time per patient per day was 2.5 hrs. 5. The mean hours of nursing care per patient per day in each class were class I 5.6 hrs, class II 6.4 hrs, class III 7.2 hrs, class IV 7.7 hrs. 6. The elements of the nursing care cost were composed of 2,212 won for direct nursing care cost, 267 won for direct material cost and 307 won for indirect cost. Sum of the elements of the nursing care cost was 2,786 won. 7. The mean cost of the nursing care per patient per day in each class were 15,601.6 won for class I, 17,830.4 won for class II, 20,259.2 won for class III, 21,452.2 won for class IV. As above, using modified hospice patient classification indicators and nursing care activity details, many critical ill patients were hospitalized in the hospice unit and it reflected that the more nursing care requirements of the patients, the more direct nursing care hours. Emotional ${\cdot}$ spiritual care, pain ${\cdot}$ symptom control, terminal care, education ${\cdot}$ communication, narcotics management and delivery, attending funeral ceremony, the major nursing care activities, were also the independent hospice service. But it is not compensated by the present medical insurance system. Exercise ${\cdot}$ safety, elimination ${\cdot}$ irrigation needed more nursing care hours as equal to that of intensive care units. The present nursing management fee in the medical insurance system compensated only a part of nursing car service in hospice unit, which rewarded lower cost that that of nursing care.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

• The Journal of Fisheries Business Administration
• /
• v.19 no.2
• /
• pp.1-58
• /
• 1988

The purpose of this study is to investigate the relation between social education and secondary education of seaside and sea village schools for supporting the successors to fishery. Objects of the study were five groups; 321 fishermen, 107 staff members of a Fishery Guidance Center, 1, 001 students, 306 teachers of sea villages, 193 staff members of a Fishery Cooperative Association. The total number of people being object of this study was 1, 876 persons. The questionaire used for this study was made after preliminary counseling with fishermen in sea villages and teachers in seaside schools. The results of this study are as follow ; 1) About the value of Fishery and successors to Fishery There have been more positive responses than negative ones to the question on the value of fishery. The main reason for positive responses lies in the potentiality for development of fishery but the negative responses are because of the heavy work. 56.8% of the respondents expected an increasing number of successor to fishery, but 43.2% of the respondents had a negative foresight on that problem. The negative respondents stated that the fisherman that moved from the sea villages to the urban areas are responsible for the none increasing numbers of successors to fishery. Most of the respondents answered that government support is needed in order to increase the number of successors to fishery. 2) Social education for Fishermen Only 40% of fishermen know the Fishing Village Guidance Center as the main institute for social education. 94.17% of the respondents prefer plural institutes to single ones. 5.9% of the respondents answered with opposit opinions. 40.4% of the respondents answered that technical teachings has not often been practised. The reason why technical teaching does not often come into effect are as follows; lack of technical expertise, insufficient concern of staff members of the Guidance Center or the Cooperation Association. Also fishermen answered that the Fisherman Guidance Center does not often practise technical education. The Fishery Cooperation Association with its social education for fisherman takes the role of education for the economical way and carries out financial assistance. The relationship between the Fishery Cooperative Association and fishermen is presented satisfactory. However, the frequency of education is not satisfactory. Indifferences between staff members of the Fishery Cooperative Association does not carry out fishery education very often. Also loaned money matters were not satisfactory. 3) Secondary education for Fishery This study showed that it is desirable that the practical course of middle schools in islets and seaside villages take education on fishery ; however, a few schools only take the practical course fishery. Most of the fishery high schools want computer education as a new recommendable course. The students of fishery high schools want computer education as a new recommendable course. The students of fishery high schools have problems with scientific terms in the text books for the practical of fishery high schools have problems with scientific terms in the text books for the practical courses. Over 80% of the respondents agreed that the principals of schools in islets and sea side villages should be men having majored in fishery. 4) The connection between social education and secondary education for fishery a. It is desirable that the principal and vice principal of secondary schools in islets and sea side villages are men majored in fishery. b. It is recommendable that fishery courses are taken as practical courses in fishery village schools for it is helpful to relate between the vocation and the district's special character, as well as to built up relation between the middle school education and the fishery high school education. c. The teachers of fishery high schools and the officials of government offices which are related to fishery should work together to realize a program on teaching various kinds of techniques and give other useful informations to fishermen. d. During the vacations the fishery high school could be used for the social education of fishermen. Seminars on fishery technique and cultural aspects could be held. Especially a spiritual education which is needed for the improvement of the society of fishermen could be achieved by a cultural education. e. On the state level a financial support to raise the number of successors to fishery, a national policy for the betterment of the life of fishermen, as well as active publicity activities are necessary. f. A financial support of the government for raising the number of the successors to fishery is needed. For this purpose a fishery education performed on a state level would be desirable.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.219-222
• /
• 1970

Riboflavin in the various materials which used for Takju brewing was determined and its quantitative changes in the Takju mashes which were mashed with polished rice and wheat flour respectively using Nuruk only for enzyme source, and with wheat flour and corn powder respectively using Nuruk and Koji, were checked at 24 hours intervals during the whole brewing period. The results obtained were as follows. a) The riboflavin contents in 100 grams of each materials were: Polished rice $46.9{\gamma}$ Wheat flour $67.3{\gamma}$ Corn powder $73.9{\gamma}$ Nuruk $169.0{\gamma}$ Koji of wheat flour $87.1{\gamma}$ Koji of corn powder $84.4{\gamma}$ b) About 30 to 40 percent of riboflavin in the polished rice, wheat flour and corn powder were losed by steaming at 10 pounds for 50 minutes. c) Riboflavin content in the plots used Nuruk only was decreased during 3 days after mashing and then increased markedly after 5 days and, more or less, decreased after 6 days. Quantitative changes of riboflavin in the plots used Nuruk and Koji showed a rugged curve without decreasing in early stages, and its content was also increased markedly 5 days after mashing and then decreased a little after 6 days. d) Approximately $82{\gamma}$ of riboflavin was determined in 100ml. of the ripened mash of the rice plot and $72{\gamma}$ in the wheat flour plot in the case of using Nuruk only. $88.6{\gamma}$ of riboflavin were determined in 100ml. of the ripened mash of the wheat flour plot and $83.6{\gamma}$ in the corn powder plot in the case of using Nuruk and Koji. e) It was assumed that $28.8{\gamma}$ to $41{\gamma}$ of riboflavin were contained in 100 ml. of finished Takju of the two plots used Nuruk only and 33.6 to 44.5${\gamma}$ in the both two plots used Nuruk and Koji. f) About $47.3{\gamma}$ of riboflavin were determined in 100 grams of Takju cake of the rice plot and $66.2{\gamma}$ in the wheat flour plot used Nuruk only, and $62.9{\gamma}$ in the corn powder plot and $64.5{\gamma}$ in the wheat flour plot used Nuruk and Koji.