• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.629-637
• /
• 1998

The HF-SCF, MP2 and B3LYP calculations have been performed on the two conceivable clusters $(HF)_2(CO)$ trimers as well as their dimer complexes FH…FH, FH…CO and FH…OC applying $6-31+G^{\ast}^{\ast}$, and $6-311+G^{\ast}^{\ast}$ basis sets. A variety of ground state properties of these trimer complexes have been listed, and compared with corresponding properties of isolated monomers and combined dimers. It was calculated that FH…CO is more stable than FH…OC by average 0.85 kcal/mol and F-H…F-H…C≡O is more stable than F-H…F-H…O≡C by 1-2 kcal/mol. The C≡O stretching bands of the F-H…F-H…C≡O and F-H…F-H…O≡C were red shifted by 24, $37\;cm^{-1}$ compared with the FH…CO and FH…OC respectively. Also, H-F stretching bands were red shifted by 54 and $353\;cm^{-1}$.

• Korean Journal Plant Pathology
• /
• v.13 no.1
• /
• pp.46-56
• /
• 1997

Based on the principal component analysis (PCA) of Richards' parameter estimates, ginseng field soils were grouped as the principal component 1 (PC1) and the principal component 2 (PC2). The microflora and physico-chemical characteristics of each soil group were compared to elucidate soil environmental factors affecting the disease development of root rot of ginseng seedling. Among 3 soil groups by PC1, there were differences in the populations of total fungi (TF) and Cylindrocarpon plus Fusarium (C+F), and the population ratio of Cylindrocarpon plus Fusarium to total fungi or total bacteria (C+F/TF, C+F/TB) in rhizoplane of ginseng seedlings, the population of total actinomycetes (TA) and the population ratio of total Fusarium to total actinomycetes (Fus/TA) in soil, and soil chemical properties (EC, NO3-N, K, Mn, ect.). Among 4 soil groups by PC2, there were differences in TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane, Trichoderma plus Gliocladium (T+G) in soil, and P2O5 content in soil. Especially, EC, NO3-N, K, K/Mg and Mn were positively correlated to PC1, and TA was negatively to PC1; however, TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane were significantly correlated to PC2 positively. On the other hand, microbes in the rhizoplane were not significantly correlated to the stand-missing rate (SMR), although TA and Fe/Mn were negatively correlated, and pH and Ca were positively correlated to SMR.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.2
• /
• pp.117-126
• /
• 1998

In this study, the residue remaining on the silicon wafer during the oxide overetching using $C_4F_8/H_2$ helicon were plasmas and effects of various cleaning and annealing methods on the removal of the remaining residue were investigated. The addition of 30%$H_2$ to the C4F8 plasma increased the C/F ratio and the thickness of the residue on the etched silicon surface. Most of the residuse on the etched surfaces colud be removed by the oxygen plasmsa cleaning followed by thermal annealing over $450^{\circ}C$. Hydrogen-coataining residue formed on the silicon by 70%$C_4F_8/30%H_2$ helicon plasmas was more easily removed than hydrogen-free residue formed residue formed by $C_4F_8$ helicon wear plasmas. However, damage remaining on the silicon surface overetched using 70%$C_4F_8/30%H_2$ helicon plasmas was intensive and the degree of reocvery duing the post-annealing was lower.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.32-38
• /
• 2002

The synthesis of $CF_3$I and $C_2F_5I from $CF_3Br$ was studied for the reuse of $CF_3Br$ which is abolished to save the ozone layer of the earth. Reaction experiments were carried out in experimental scale synthesis equipment with catalysts, such as CuI, Kl, $K_2$$CO_3$, KF metal salt/active carbon and alumina support at $400~600^{\circ}C$. Main products of reaction were $CF_3i$ and $C_2F_5I$ with small amounts of $C_2F_5I$, $CF_4$, $CF_2Br_2$ by-products. 7.5wt% KI and $K_2CO_3$over activated carbon catalysts show the highest yield of $CF_3$I and 7.5wt% CuI over alumina catalysts show the highest yield of $C_2F_5i$. And optimal reaction temperature was about $500^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.31-38
• /
• 2002

In order to improve the 0.35 $mutextrm{m}$-via hole etching process the etching characteristic of the gas $C_2F_{6}$ has been analyzed. The samples were triple-layer films(TEOS/SOG/TEOS) on 8-inch wafers and the orthogonal array matrix technique was used for the process. The equipment for etching was the transformer coupled plasma (TCP) source which is a type of high density plasma(HDP). This experiment showed the etching rate for $C_2F_{6}$ was 0.8 $mutextrm{m}$/min-1.1 $mutextrm{m}$/min and the measured uniformity was under $pm$6.9% in the matrix window. The CD skew comparison between pre and post-etching was under 10% which is an outstanding results in the window of profile in anisotropic etching. There was no problem in C2F6 with the flow rate of 20sccm, but when 14sccm of $C_2F_{6}$ was supplied there was a recess problem on the inner wall of SOG film. Consequently the etching characteristic of $C_2F_{6}$ shows a fast etching rate and a very wide process window in HDP TCP.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.1
• /
• pp.51-61
• /
• 2018

In this article, we mainly use Nevanlinna theory to investigate some special difference equations of malmquist type such as $f^2+({\Delta}_cf)^2={\beta}^2$, $f^2+({\Delta}_cf)^2=R$, $f{^{\prime}^2}+({\Delta}_cf)^2=R$ and $f^2+(f(z+c))^2=R$, where ${\beta}$ is a nonzero small function of f and R is a nonzero rational function respectively. These discussions extend one related result due to C. C. Yang et al. in some sense

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.224-225
• /
• 2006

The Ethylene polymerization behavior of a series of polymethylene bridged dinuclear CGC $[Zr({\eta}^{5}:{\eta}^{1}-C_{9}H_{5}SiMe_{2}NCMe_{3})Me_{2}]_{2}[(CH_{2})_{n}]\;[_{n}=6(1),\;9(2),\;12(3)]$ in the cocatalytic activation with $Ph_{3}C^{+}B^{-}(C_{6}F_{5})_{4}\;(B_{1})\;or\;Ph_{3}C^{+}(C_{6}F_{5})_{3}B^{-}C_{6}F_{4}B^{-}(C_{6}F_{5})_{3}Ph_{3}C^{+}\;(B_{2})\;or\;B(C_{6}F_{5})_{3}\;(B_{3})$ were investigated to study the nuclearity effects as well as the counteranion effects. The ethylene polymerization and ethylene/1-hexene copolymerization were conducted at $30^{\circ}C$ It was found that both in ethylene polymerization and ethylene/1-hexene copolymerization, activities increased in the order of 1 < 2 < 3, which indicates the presence of longer bridge between two active sites contributes more efficiently to facilitate the polymerization activity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.154-161
• /
• 2001

We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1046-1054
• /
• 2001

Effects of B$_2$O$_3$and CuO addition on the microwave dielectric properties of the PbWO$_4$-TiO$_2$ceramics were investigated in order to use this material as an LTCC material for fabrication of a multilayered RF passive components module. We found that PbWO$_4$could be used as an LTCC material because of its low sintering temperature (8$50^{\circ}C$) and fairy good microwave dielectric properties($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz and $\tau$$_{f}$ =-31 ppm/$^{\circ}C$). In order to stabilize $\tau$$_{f}$ of PbWO$_4$, TiO$_2$was added to the PbWO$_4$and the mixture was sintered at 8$50^{\circ}C$. A near zero $\tau$$_{f}$ value (+0.2 ppm/$^{\circ}C$) was obtained with 8.7 mol% TiO$_2$addition. $\varepsilon$r and Q$\times$f$_{0}$ values were 22.3 and 21400 GHz, respectively. It was believed that the decrement of Q$\times$f$_{0}$ value with TiO$_2$addition was resulted from increasing grain boundary. In order to improve Q$\times$f$_{0}$, various amounts of B$_2$O$_3$and CuO were added to the 0.913PbWO$_4$-0.087TiO$_2$mixture. The optimum amount of CuO was 0.05 wt%. At this addition, the 0.913PbWO$_4$-0.087TiO$_2$ceramic showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$ =-2.2ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32900 GHz after sintered at 8$50^{\circ}C$. In case of B$_2$O$_3$addition, the optimum amount range was 1.0~2.5 wt% at which we could obtain following results; $\varepsilon$$_{r}$=20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, and $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$.

• Korean Journal of Mathematics
• /
• v.19 no.1
• /
• pp.17-24
• /
• 2011

Let X, Y be vector spaces. It is shown that if an even mapping $f:X{\rightarrow}Y$ satisfies f(0) = 0, and $$2(_{2d-2}C_{d-1}-_{2d-2}C_d)f\({\sum_{j=1}^{2d}}x_j\)+{\sum_{{\iota}(j)=0,1,{{\small\sum}_{j=1}^{2d}}{\iota}(j)=d}}\;f\({\sum_{j=1}^{2d}}(-1)^{{\iota}(j)}x_j\)=2(_{2d-1}C_d+_{2d-2}C_{d-1}-_{2d-2}C_d){\sum_{j=1}^{2d}}f(x_j)$$ for all $x_1$, ${\cdots}$, $x_{2d}{\in}X$, then the even mapping $f:X{\rightarrow}Y$ is quadratic. Furthermore, we prove the Hyers-Ulam stability of the above functional equation in Banach spaces.