• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.77-84
• /
• 1999

Recently, it is increased the use of High-Strength Light-Weight Concrete(HLC) in the high-rise buildings and mega-structures. But there are a few research on the bond behavior of HLC, so it need to study about that. The present study was performed to investigate the bond characteristics of HLC. Major test variables include concrete compressive strength(f'c), concrete cover(c), bond length (${\ell}_{db}$), and bar diameter($d_b$). Test results indicate that the bond stress of HLC is increased with the increment of $\sqrt{f'_c}$ and concrete cover, bond stress is decreased with increment of bond length and bar diameter. And the final failure mode such as splitting or pullout failure is significantly affected by the concrete cover to bar diameter ratios(C/$d_b$). Test results were compared with ACI code and other proposed equations. The bond stress of HLC is higher than that of normal-strength normal-weight concrete, but lower than that of high-strength normal-weight concrte. Considering the present test results, modification factor(${\lambda}$= 1.3) of bond length in ACI 318-95 code for light-weight concrete is may have to be reviewed to apply to HLC.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.349-365
• /
• 2006

State of problem : A number of investigation about increase of surface area via various surface treatments and modification of surface constituent have been carried out. Purpose : The surface characteristics and stability of implants treated with anodic oxidation, fluoride ion incorporation, and groups treated with both methods were evaluated. Material and method : Specimens were divided into six groups, group 1 was the control group with machined surface implants, groups 2 and 3 were anodic oxidized implants (group 2 was treated with 1M $H_2SO_4$ and 185V, group 3 was treated with 0.25M $H_2SO_4$ and $H_3PO_4$ and 300V). Groups 4, 5 and 6 were treated with fluoride. Group 4 was machined implants treated with 0.1% HF, and groups 5 and 6 were groups 2 and 3 treated with 10% NaF respectively. Using variable methods, implant surface characteristics were observed, and the implant stability was evaluated on rabbit tibia at 0, 4, 8 and 12 weeks. Result : 1. In comparison of the surface characteristics of anodic oxidized groups, group 2 displayed delicate and uniform oxidation layer with small pore size containing Ti, C, O and showed mainly rutile, but group 3 displayed large pore size and irregular oxidation layer with many crators. 2. In comparison of the surface characteristics of fluoride treated groups 4, 5, 6 and non-fluoride treated groups 1, 2, 3, the configurations were similar but the fluoride treated groups displayed rougher surfaces and composition analysis revealed fluoride in groups 4, 5, 6. 3. The fluoride incorporated anodic oxidized groups showed the highest resonance frequency values and removal torque values, and the values decreased in the order of anodic oxidized groups, fluoride treated group, control group. 4. According to implant stability tests, group 2 and 3 showed significantly higher values than the control group (P<.05). The fluoride treated groups showed relatively higher values than the non fluoride treated groups and there were significant difference between group 4 and group 1 (P<.05). Conclusion : From the results above, it can be considered that the anodic oxidation method is an effective method to increase initial bone stability and osseointegration and fluoride containing implant surfaces enhance new bone formation. Implants containing both of these methods should increase osseointegration, and reduce the healing period.

• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.517-524
• /
• 2014

Nitrite-Type hydrocalumite (calumite) is a material that can adsorb chloride ions ($Cl^-$) that cause corrosion of reinforce bars and liberate the nitrite ions ($NO_2{^-}$) that inhibit corrosion in reinforced concrete. In this study, polymer-modified mortars using two types of epoxy resin with calumite are prepared with various polymer binder-ratios of 0, 5, 10, 15, 20% and calumite contents of 0, 5%. The specimens are tested for chloride ion penetration, carbonation, drying shrinkage and corrosion inhibition. As a result, the chloride ion penetration and carbonation depth of PMM using epoxy resin somewhat increases with increasing calumite contents, but those remarkably decreases depending on the polymer-binder ratios. The 28-d drying shrinkage shows a tendency to decrease with increasing polymer-binder ratio and calumite content. Unmodified mortars with calumite content of 5% did not satisfy quality requirement by KS. However, it was satisfied with KS requirement by the modification of epoxy resin in cement mortar. On the whole, the carbonation and chloride ion penetration depth of epoxy-modified mortars with calumite is considerably improved with an increase in the polymer-binder ratio regardless of the calumite content, and is remarkably improved over unmodified mortar. And, the replacement of the portland cement with the calumite has a marked effect in the corrosion-inhibiting property of the epoxy-modified mortars.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.248-258
• /
• 1979

Glucose 6-phosphate dehydrogenase of Leuconostoc mesenteroides which was purifid by an affinity chromatography was studied on the characterization, kinetics and chemical modification. The apparent molecular weight of the enzyme was 112,000 by the gel filtration method of Sephadex G-200 column. The optimum temperature of $NAD^+$-linked reation was 50$^{circ}C$ and the activation energy and the heat of inactivation were 8.36 kcal/mole and -58.2kcal/mole, respectively. The steady state kinetic study showed KG6P, Kemp, and CX KNADP to be 76.9 PM, 7.46${\mu}M$ and 7.14 ${\mu}M$, respectively, and KGGP, KNAD,and aKNm to be 53.7${\mu}M$, 115.2${\mu}M$ and 702.2${\mu}M$ for the $NAD^+$-linked reaction at pH 7.8, optimum pH. The pH dependent kinetic constants suggested that the two ionizing groups whose pKa is 7.2 .and pKb is 9.0-9.6 were involved in the enzyme-substrate interaction. Evidence by photooxidation and carboxymethylation of the enzyme suggested that the imidazole group of histidine with pKa group may participate in the catalytic site.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.587-594
• /
• 2000

At present embryonic stem (ES) cells with confirmed pluripotential properties are only available in the mouse. Recently, we were able to isolate, culture and genetically transform primordial germ cell (PGC)-derived cells from pig embryos and demonstrate their ability to contribute to chimera development in the pig. In order to determine whether the system we developed could be used to isolate embryonic germ (EG) cells from other mammalian species, we placed isolated PGCs from cattle, goats, rabbits and rats in culture. Briefly, PGCs were isolated from fetuses of cow (day 30-50), goat (day 25), rabbit (day 15-18) and rat (day 11-12), and plated on STO feeder cells in Dulbecco's modified Eagle's medium (DMEM): Ham's F10 medium (1:1) supplemented with 0.01 mM nonessential amino acids, 2 mM L-glutamine, 0.1 mM $\beta$ - mercaptoethnol, soluble recombinant human stem cell factor (SCF; 40ng/ml), human basic fibroblast growth factor (bFGF; 20ng/ml) and human leukemia inhibitory factor (LIF; 20ng/ml). For maintenance of the cells, colonies were passed to fresh feeders every 7-10 days. In all species tested, we were able to obtain and maintain colonies with ES-like morphology. Their developmental potential was tested by alkaline phosphatase (AP) staining and in vitro differentiation assay. For genetic transformation, cells were electroporated with a construct containing the green fluorescent protein (GFP) under the control of the cytomegalovirus (CMV) promoter. GFP-expressing colonies were detected in cattle, rabbits and rats. These results suggest that PGC-derived cells from cattle, goats, rabbits and rats can be isolated, cultured, and genetically transformed, and provide the basis for analyzing their developmental potential and their possible use for the precise genetic modification of these species.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.807-812
• /
• 2005

This study is to investigate the correlation of pore structures of Zeolite 5As modified with acid and their adsorption capacity of toluene vapor using the dynamic adsorption method. The experimental results showed that the modification with acid allowed more micropores and enlarged the existing pores. Toluene vapor was mainly adsorbed on the surface of pores over $15\;{\AA}$ in diameter. The equilibrium adsorption capacity of toluene vapor of the modified Zeolite 5As was in the range of $15{\sim}70\;mg/g$ and the equilibrium adsorption capacity was increased to f times than that of the Zeolite 5A. The correlation between the total cumulative surface area and the equilibrium adsorption capacity was hard to say linear. The correlation in diameter between the cumulative surface area in the range of over $15\;{\AA}$ and the equilibrium adsorption capacity gate the highest correlation factor of 0.997.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.75-75
• /
• 2018

Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

• Radiation Oncology Journal
• /
• v.17 no.3
• /
• pp.230-237
• /
• 1999

Purpose : To elucidate the effects of pentoxifylline and diltiazem on the late response of the salivary glands of the rat after irradiation. Materials and Methods : Sixteen Sprague-Dawley rats were divided into 4 groups : (a) irradiation alone (b) irradiation with pentixifylline (PTX) (c) irradiation with diltiazem (DTZ) (d) irradiation with both PTX and DTZ. Irradiation was given in a single fraction of 16 Gy using 4 MV photon energy through an anterior port encompassing the left side of the salivary gland leaving the right side of salivary gland as a control. PTX, 20 mg/kg and/or DTZ, 50 mg/kg were infused intraperitoneally before irradiation, Two rats from each group were sacrificed on the 10th week and the rest was sacrificed on the 16th week after irradiation. Histopathologic examinations were undertaken for each section and the proportion of vacuolated cells out of the total number of cells under light microscopic fields was calculated. The statistical significance in the difference of the proportion of the vacuolated cells among the experimental groups was evaluated by a $x^2$-test. Results : Irradiated salivary glands of the 10th week group revealed markedly increased number of vacuolated cells compared to those of unirradiated control. The proportion of vacuolated cells was significantly reduced in both the PTX group (p value=0.001) and the combined PTX and DTX group compared to those of irradiation alone group. The DTZ alone group did not reveal the significant reduction of vacuolated cells compared to those of irradiation alone group (p value, >0.05). The 16th week groups revealed similar findings to those of the 10th week group, but the degree of chronic inflammatory cell infiltrates and interstitial fibrosis was increased and the number of acinar cells was reduced compared to those of the 10th week group. Conclusions : PTX significantly reduced the late radiation response of salivary glands, but DTZ did not reduce the same degree as PTX did. Taking the positive results of this study into consideration, it seems reasonable to apply PTX into the clinical trial for the head and neck irradiation to reduce the late radiation sequelae of salivary glands in the near future. At the same time the further experiment to clarify the subcellar mechni는 involved in PTX should be preceded.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.283-287
• /
• 2005

The slow evolution of global magnetic fields and other dynamical processes in atmospheres of CP magnetic stars lead to the development of induced electric currents in all conductive atmospheric layers. The Lorentz force, which results from the interaction between a magnetic field and the induced currents, may modify the atmospheric structure and provide insight into the formation and evolution of stellar magnetic fields. This modification of the pressure-temperature structure influences the formation of absorption spectral features producing characteristic rotational variability of some spectral lines, especially the Balmer lines (Valyavin et al., 2004 and references therein). In order to study these theoretical predictions we began systematic spectroscopic survey of Balmer line variability in spectra of brightest CP magnetic stars. Here we present the first results of the program. A0p star $\Theta$ Aur revealed significant variability of the Balmer profiles during the star's rotation. Character of this variablity corresponds to that classified by Kroll (1989) as a result of an impact of significant Lorentz force. From the obtained data we estimate that amplitudes of the variation at H$\alpha$, H$\beta$, H$\gamma$ and H$\delta$ profiles reach up to $2.4\%$during full rotation cycle of the star. Using computation of our model atmospheres (Valyavin et al., 2004) we interpret these data within the framework of the simplest model of the evolution of global magnetic fields in chemically peculiar stars. Assuming that the field is represented by a dipole, we estimate the characteristic e.m.f. induced by the field decay electric current (and the Lorentz force as the result) on the order of $E {\~} 10^{-11}$ cgs units, which may indicate very fast (< < $10^{10}$ years) evolution rate of the field. This result strongly contradicts the theoretical point of view that global stellar magnetic fields of CP stars are fossil and their the characteristic decay time of about $10^{10}$ yr. Alternatively, we briefly discuss concurring effects (like the ambipolar diffusion) which may also lead to significant atmospheric currents producing the observable Lorentz force.

• Clinical and Experimental Reproductive Medicine
• /
• v.31 no.4
• /
• pp.209-215
• /
• 2004

Objective: Embryonic stem (ES) cells could be differentiated into the specific cell types by alternation of culture condition and modification of gene expression. This study was performed to evaluate the differentiation protocol for mouse and human ES cells to insulin secreting cells. Methods: Undifferentiated mouse (JH-I) and human (Miz-hESI) ES cells were cultured on STO feeder layer, and embryoid bodies (EBs) were formed by suspension culture. For the differentiation, EBs were cultured by sequential system with three stage protocol. The differentiating ES cells were collected and marker gene expressions were analyzed by seIni-quantitative RT-PCR in each stage. Amount of secreted insulin levels in culture media of human ES cells were measured by human insulin specific RIA kit. Results: During the differentiation process of human ES cells, GATA-4, a-fetoprotein, glucose transporter-2 and Ngn-3 expression were increased whereas OctA was decreased progressively. Insulin and albuInin mRNAs were expressed from stage IT in mouse ES cells and from stage III in human ES cells. We detected 3.0~7.9 IlU/rnl secretion of insulin from differentiated human ES cells by in vitro culture for 36 days. Conclusion: The sequential culture system could induce the differentiation of mouse and human ES cells into insulin secreting cells. This is the fIrst report of differentiation of human ES cells into insulin secreting cells by in vitro culture with serum and insulin free medium.