• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.561-564
• /
• 2000

Silicon capacitive pressure sensor has been fabricated by using electrochemical etching stop and silicon-to-glass electrostatic bonding technique. A diaphragm structure is designed to compensate the nonlinear response. A cavity is etched into the silicon to the depth of 2$\mu\textrm{m}$ by anisotropic etching in 20wt.% TMAH solution at 80$^{\circ}C$. A fabricated sensor showed 3.3 pF zero-pressure capacitance, 297 pp.m/mmHg sensitivity, and a 7.4 7%F.S. nonlinear response in a 0-1 kgf/cm$^2$pressure range.

• Mycobiology
• /
• 제35권3호
• /
• pp.124-128
• /
• 2007

Ganoderma resinaceum tolerated sodium chloride salt stress within a range of 0 mM till 300 mM. It responded to salt stress with fluctuation in proline formation at different NaCl concentrations. However, the mycelial dry weight, total protein contents and exopolysaccharides did not changed considerably. Increasing sodium chloride concentration led to morphological alteration in fungal mycelia with disappearance of fungal cell wall, plasmolysis, and vacuolation as indicated with electron microscopic examination of the fungal growth.

• 비파괴검사학회지
• /
• 제4권1호
• /
• pp.5-10
• /
• 1984

One of the cylindrical reactor vessels in petrochemical plants was examined by acoustic emission method. The vessel was quiet in view of A.E. activity throughout the pressure range $12-44kg.f/cm^{2}.G$. Above the pressure of $44kg.f/cm^2$, some events were appeared lower than 30 counts. In order to verify the events, other Nondestructive testing methods were performed and a surface crack, 10mm in length and 0.8mm in depth, was found on the outside surface of circumferential weld.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.771-773
• /
• 2014

본 논문에서는 장거리 레이더용 차량 충돌 방지 77-GHz CMOS 믹서를 제안한다. 이러한 회로는 2볼트 전원전압에서 동작하며, 저 전압 전원 공급에서도 높은 변환 이득과 낮은 변환 손실 및 낮은 잡음지수를 가지도록 설계되어 있다. 제안한 회로는 TSMC $0.13{\mu}m$ 혼성신호/고주파 CMOS 공정($f_T/f_{MAX}=120/140GHz$)으로 설계하였다. 전체 칩 면적을 줄이기 위해 수동형 인덕터 대신 전송선(Transmission Line) 을 이용하였다. 본 논문에서 설계한 믹서는 약 5.2dB의 우수한 변환이득 특성과 2.1dBm의 우수한 IIP3 특성을 보였다.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1209-1218
• /
• 2001

The present paper proposes a new correlation for the flow boiling heat transfer coefficients in the low flow rate condition (Re(sub)LF$\leq$200) within horizontal rectangular channels with small gaps (heights). The gap between the upper and the lower plates of each channel ranges from 0.4 to 2mm while the channel width being fixed to 20mm. Refrigerant 113 was used as the test fluid. The mass flux ranges from 50 to 200kg/㎡s and the channel walls were uniformly heated with the heat flux range of 3-15kW/㎡. The quality range covers from 0.19 to 0.76 and the flow pattern is considered to be annular. The measured heat transfer coefficients increase with the mass flux and the local quality; however the effect of the heat flux appears to be minor. At the low mass flux condition, which is more likely with the smaller gap size, the heat transfer is primarily controlled by the liquid film thickness. The proposed F factor for the heat transfer coefficient in the range of Re(sub)LF$\leq$200 well represents the experimental data within the deviation of $\pm$20%. The Kandlikars flow boiling correlation covers the higher flow-rate range(Re(sub)LF>200) within the deviation of $\pm$20%.

• 지역사회간호학회지
• /
• 제7권2호
• /
• pp.313-332
• /
• 1996

This study was conducted to grasp the condition of freshman's knowledge and attitudes on abortion and to offer the basic materials to prevent abortion in family planning and health promotion. The objects were comprised of 290 who volunteered from 3 Junior colleges. The material of this study was by questionaire(chronbach a=.8589, .8959) suited to the purpose of this research which has been made through studying references. All the questionaires were collected immediately without explanation. The data was collected from the 29th of April to the 17th of May in 1996. Analysis of the data was done utilizing SPSS program for percentage, $mean{\pm}$ standard deviation and ANOVA. The results are as follows: 1. General features of the objects of study. Mean age was 20.47, mean of brothers and sisters was 2.93. Those who had no experience in abortion with her mother was 59.0%, and the middle social level was the highest (95.5%). 2. The conditions of attitudes about abortion. 5 points were given to 'very affirming' and, 1 point was given to 'strong denial' the total average was 4.00, and the range was $4.83\sim2.99$. 3. The condition of knowledge about abortion. 5 point were given to 'very affirming' and, 1 point was given to 'strong denial', the total average was 2.75, the range was $3.65\sim2.18$. Also knowledge of abortion was 6.2 points. Knowledge of medical and therapeutic abortion was 9.4 points. Knowledge of the physical complications of abortion was 3.4 points. 4. Correlation between general features and attitude variables. Age groups may have a higher affirmative attitude score in abortion(F=8.097, p<.000). The having 2 sisters group may have a low attitude towards abortion(F=10.34l, p<.000). Experience in abortion with mother group may have a lower affirmative score concerning abortion (t=8.925, p<.000). 5. Correlation between general features and knowledge variables. Age groups may have a higher knowledge score in abortion (F=10.829, p<.000). The having brothers group may have more high knowledge in abortion(F=2.534, p<.050). The $22\sim23$ years group may have higher knowledge in abortion (F=3.075, p<.028). The having more than 2 sisters group have more higher knowledge in abortion(F=5.605, p<.004). The having more the 3 brothers group may have higher knowledge the physical complications in abortion(F=4.022, p<.019). 6. Correlation between regions of the major variables and knowledge, attitude variables. There was no significance in the statistics.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2004년도 대한지구물리학회.한국지구물리탐사학회 공동학술대회 초록집
• /
• pp.165-169
• /
• 2004

Marine magnetic survey were carried out at Sokotra Basin offshore Korea between latitudes $31^{\circ}$ 42'32' N and $32^{\circ}$ 46'29' N, and longitudes $123^{\circ}$ 56'26" E and $125^{\circ}$ 49'16" E in order to estimate the depth of basement complex and as well as to configure it surface and produce the thickness of sedimentary sequence at the study area. Two methods have been used for depth estimation and basement configuration: the power spectrum and the 3-D analytical signal. The estimated depths resulted from the power spectrum method range from 1.4 km to 6.0 km for deep sources (basement troughs), and from 0.3 km to 1.75 km for shallow source (basement peaks). An isopach map was prepared for estimating the thickness of the sedimentary sequence at the study area; it ranges from 1.2 to 4.66 km. The estimated depths resulted from the analytic signal method range from 1.0 to 6 km. A basement configuration map was constructed for the study area in the basin. They show a well agreement with the geology of the study area.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 2003년도 정기총회 및 학술발표회
• /
• pp.73-73
• /
• 2003

We report here the results on N-acetyl-N'-methylamide of alanine (Ac-Ala-NHMe) calculated using the ab initio molecular orbital method with the self-consistent reaction field (SCRF) theory at the HF level with the 6-3l+G(d) basis set to investigate the conformational preference of alanine depending on the backbone torsion angles $\square$ and$\square$ in the gas phase, chloroform, and water. There are seven local minima (LM) in the gas phase and two additional LM are found in chloroform and water. These two additional LM A (an $\square$-helical structure) and F (a polyproline structure) are stabilized only in solutions. In the gas phase, the lowest LM is the conformation C with a C$\sub$7/ intramolecular hydrogen bond and the relative conformational energies range from 0.3 to 6.0 ㎉/mol. In chloroform, the lowest LM is the conformation E (an extended structure) and the relative conformational energies range from 0.7 to 4.9 ㎉/mol. In particular, we identified 14 possible transition states connecting between seven LM in the gas phase. The search for transition states probable in chloroform and water is now in progress.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.29-41
• /
• 1993

In order to surface Hydrophobilization of Poly(ethylene terephthalate) (PET) fiber samples were treated in the atmosphere of CF$_{4}$ or $C_{2}$F$_{6}$glow discharge. The sample used in this study was PET film which is 75$\mu$m thick made by Teijin, O-Type(Japan). The cleaned samples were placed in plasma reactor made of pyrex glass cylinder, and plasma processing was carried out by glow discharge of CF$_{4}$ or $C_{2}$F$_{6}$ gas, being continuously fed by gas flow and continuously pumped out by a vacuum system. Electric power source for generate plasma state was sustained alternating current(60Hz) and voltage was sustained 600 volt. The duration of plasma treatment varied from 15 to 120 seconds except special case, the monomer gase pressure varied from 0.02 to 0.3 Torr and power range was 10 to 90 watts. The hydrophobic features of changed PET surface were evaluated by contact angle measurement and surface chemical characteristics were analyzed by ESCA. Results can be summerized as follows. 1. The most favorable setting position of substrate was the center area between the two electrodes. 2. $C_{2}$F$_{6}$ discharge current was lower than that of CF$_{4}$ when same voltage was sustained. Treated efficiency between CF$_{4}$ and $C_{2}$F$_{6}$ did not revealed significant differences under same electric power(wattage). 3. When monomer pressure is very low below 0.02 torr, as though substrate is exposed to CF$_{4}$ or $C_{2}$F$_{6}$ plasma, it tend to be hydrophilic through a little of fluorine bond and a great deal of oxidizing reaction. 4. There brought good hydrophobilization when monomer pressure was more 0.1 torr and duration of glow discharge treatment was over 45 seconds. When monomer pressure was too high, discharge current became low. Although prolong the duration, there was no more high hydrophobilization. 5. According to ESCA analysis, there were a little CF bond and a prevailing CF$_{2}$ bond in CF$_{4}$-treated substrate. There were CF$_{3}$, a little CF and a prevailing CF$_{2}$ bond in $C_{2}$F$_{6}$-treated substrate.d substrate.

• Journal of Oral Medicine and Pain
• /
• 제10권1호
• /
• pp.73-89
• /
• 1985

This study comprised 157 extracted teeth, 73 of the teeth originated from mates and 84 from females, the age range was 12-79 years. The correlation coefficient of each Gustafson's criteria in relation to age was carried out. Age estimation were performed on 157 teeth according to the method by Gustafson and by use of multiple regression, as used by Johanson, after evaluating the six criteria of Gustafson by multiple regression computer analysis. Two prediction formulas and standard deviations were compared with each other. The results were as follows : 1. The author found that six Gustafson's criteria had strong correlation with age except root resorption, and correlation coefficients were r = 0.79 (Transparent dentin), r=0.72 (Secondary dentin), r 0.69 (Periodontal change), r=0.63(Attrition), r = 0.39 (Root resorption), respecti vely. 2. The age estimation formula by Gustafson's method was calculated as follows: Y 8.88 + 3.52X r =0.87, r2 = 0.76, SD = 8.18, F = 483.56, P < 0.01 The age estimation formula by multiple regression was calculated as follows: Y 8.57 + 6.37T + 6.37T + 4.63P + 2.70S + 2.40C + 3.08A + 1.34R r= 0.89, r2 = 0.78, SD = 7.82, F = 91.62, P < 0.01, Durbin-Watson Coefficient = 1.09 3. In comparison of two estimation formulas, the formula by multiple regression, the method of Johanson, was found to be slightly more reliable than Gustafson's method. Gustafson's method SD = 8.18, Multiple regression (Johanson's method) SD = 7.82 4. It was reaffirmed that Gustafson's six criteria could be a independent variable in multiple regression analysis.