• 제목/요약/키워드: F0 Range

검색결과 1,449건 처리시간 0.032초

백령도에서 관측된 장거리 유입 PM1.0의 주성분 공간 분포: PSCF 및 군집분석 관계 (Spacial Distribution of PM1.0 Major Compounds from Long Range Transport at the Baegryungdo Super Site: Relationship between PSCF and Cluster Analysis)

  • 오세호;이태형;박태현;안준영;박진수;최진수;박규태;배민석
    • 한국대기환경학회지
    • /
    • 제33권4호
    • /
    • pp.411-423
    • /
    • 2017
  • The spacial potential source contribution function (PSCF) method was utilized by considering topography and height of back trajectories based on the measurement of organic typo matter (OM), $NO_3{^-}$, $SO{_4}^{2-}$, and $NH_4{^+}$ at the Baegryungdo Super Site ($37^{\circ}57^{\prime}N$, $124^{\circ}37^{\prime}E$, 135 m a.s.l. (above sea level)) for three selected periods (i.e., January~April, May~August, and September~December) in 2013. The PSCF were calculated on the contributions of trans-boundary transport to the hourly mean concentrations using a high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS). The cluster analysis using back trajectories was performed to identify the major airflows to the sampling site. The upper atmosphere in the Tianjin area of China and the lower atmosphere in the western coast area of Korea can be the major source of trans-boundary pollution to the sampling site during January~April resulted from PSCF. The area in Lianyungang-city and Liaoning-sheng, China can be responsibile for the nitrogen related secondary compounds during May~August, and Shandong Peninsula in China is the major source area during September~December. In addition, relationships between the cluster analysis of back trajectories and PSCF were investigated for the statistically significance level for the source areas.

열중량 분석기를 이용한 목재펠릿 및 국내무연탄의 연소 특성 조사 (Study on the Combustion Characteristics of Wood-pellet and Korean Anthracite Using TGA)

  • 김동원;이종민;김재성;선평기
    • Korean Chemical Engineering Research
    • /
    • 제48권1호
    • /
    • pp.58-67
    • /
    • 2010
  • 본 연구에서는 국내 상용 순환유동층 보일러에서 연료로 사용하고 있는 저급 국내무연탄과 혼소용 연료로 이용할 예정인 목재펠릿의 각각의 연소 특성을 조사하기 위해 열중량 분석기(TGA)를 이용하여 비등온 실험(5, 10, 20, $30^{\circ}C/min$) 및 등온 조건으로 촤 연소 실험을 수행하였다. 목재펠릿의 경우는 승온 속도에 따라 차이가 있으나, 국내무연탄에 비해 낮은 온도인 $200{\sim}620^{\circ}C$ 사이에서 연소되었으며, 최대 반응속도를 나타내는 온도 또한 국내무연탄의 그것에 비해 매우 낮음을 알 수 있었다. 비등온 실험 결과를 Friedman 방법으로 해석한 결과, 무게감량이 가장 큰 2차 구간에서의 목재펠릿 및 국내무연탄의 활성화에너지는 44.12, 21.45 kcal/mol이었으며, 반응차수 및 빈도인자는 각각 5.153, 0.7453 및 $4.01{\times}10^{16}$, $1.39{\times}10^6(s^{-1})$임을 확인할 수 있었다. 또한 등온 조건으로 촤 연소 실험 결과, 화학반응 율속단계에서의 목재펠릿 및 국내무연탄의 활성화에너지는 각각 27.5, 51.2 kcal/mol이었으며, 빈도인자는 각각 $2.55{\times}10^{12}$, $1.49{\times}10^{10}(s^{-1})$임을 확인할 수 있었다. 국내무연탄에 비해 목재펠릿이 낮은 온도에서 연소 반응이 시작이 되고 반응차수 및 빈도인자가 높아 반응속도를 빠를 것으로 판단되어 혼소 시 연소 제어가 잘 이루어질 경우, 연소로 내의 연소 분위기가 향상될 것으로 예상된다.

Radiation Induced-Grafting of Acrylic Acid onto Polyvinyl Chloride Fibers

  • Park, Jae-Ho;Lee, Chong-Kwang
    • Nuclear Engineering and Technology
    • /
    • 제8권2호
    • /
    • pp.89-99
    • /
    • 1976
  • Polyvinyl Chloride 섬유에 Acrylic acid (AA)를 방사선을 이용하여 Graft 중합 반응시킬 때 Homopolymer의 방지제인 Ferrous, Ferric, Cupric salt을 첨가시켰다. 방사선 선원으로서는 Co-60의 ${\gamma}$-선 또는 Van de Graaff 가속기를 사용하였으며 조사방법으로는 상호조사법을 이용하였다. Graft 중합반응과 Homopolymerization은 반응계에 첨가시킨 Cation에 의해서 영향을 받았으며 그 효율은 $Cu^{2+}$>$Fe^{2+}$>$Fe^{3+}$의 순서였다. Graft 중합반응속도는 방사선 선량율이 $8.5\times10^3$부터 $1.4\times10^{5}$rad/hr 사이에서 선량율의 0.76중에 비례하였고, Craft 중합반응에 대한 활성화 에너지는 $25^{\circ}$부터 $75^{\circ}C$ 사이에서 6.1 Kcal/mole이었다. 이 때 중합반응 용액은 AA-$H_2O$-$(CH_2Cl)_2$로서 Homopolymer inhibitor의 농도는 $4\times10^{-3}$ mole/1이었다. Graft율은 총선량과 선량율이 클 때 증가하였거나 또는 Polymer 팽윤제인 Ethylene dichloride가 monomer 혼합용액과 포화되었을 때 증가되었다. Acrylic acid가 Craft된 Polyvinyl Chloride 섬유는 흡습율, 열수축성, 용융성이 크게 증진되었고 Tensile properties는 original과 별차이를 나타내지 않았다.

  • PDF

반회후두신경 손상을 동반하지 않은 갑상선 절제술 환자에서 수술 초기의 음성 및 연하 기능의 변화에 대한 분석 (Analysis of Voice and Swallowing Symptoms after Thyroidectomy in Patients without Recurrent Laryngeal Nerve Injury in Early Postoperative Period)

  • 김희진;금보람;김근희;전승식;김혜진;김성균;홍석진;홍석민;김용복;박일석
    • 대한후두음성언어의학회지
    • /
    • 제27권2호
    • /
    • pp.108-113
    • /
    • 2016
  • Background and Objectives : After thyroidectomy, many patients experience problems report such things as reduced voice range and vocal fatigue, swallowing problems without superior and recurrent laryngeal nerve injury. The purpose of this study was to evaluate voice and swallowing problems before and after thyroid surgery without laryngeal nerve injury. Materials and Methods : Ninety-three patients who underwent thyroidectomy without laryngeal nerve injury and completed the follow-up evaluations were studied between June 2013 and December 2015. Each evaluation was performed preoperatively, as well as 1 week, 1 month postoperatively. Analysis was performed including voice handicap index (VHI), dysphagia handicap index (DHI), and acoustic voice analysis. Results : Patients show significant variation of parameters in the fundamental frequency (F), maximal phonation time (MPT), shimmer, jitter and soft phonation index (SPI) early after operation, and most of them showed recovery of parameters after 1month of operation. Perceptive complaint of voice and swallowing also showed significant decreased after operation (p<0.005). After 1month of operation, MPT, highest frequency and frequency ranges still showed significant decreased parameters. Comparing acoustic and perceptive parameters of total thyroidectomy and lobectomy, there was no significant changes between them except highest frequency (p=0.042). Conclusion : The results from both subjective and objective evaluations show voice and swallowing disturbance after thyroidectomy even in the absence of laryngeal nerve and provide patients information about the recovery process after surgery. Highest frequency parameter showed most significant changes after operation.

  • PDF

개수로 측벽 세로돌출줄눈의 흐름저항 (Flow Resistance of Vertical Rib Sidewall in Open Channel)

  • 박상덕;지민규;남아름;우태영;신승숙
    • 한국수자원학회논문집
    • /
    • 제46권9호
    • /
    • pp.947-956
    • /
    • 2013
  • 급경사 산지하천 수충부의 호안은 대부분 콘크리트 옹벽으로 되어있다. 표면이 매끄러운 콘크리트 옹벽호안은 유속을 더 강화시키기 때문에 수충부 홍수피해의 원인이 되기도 한다. 본 연구에서는 개수로의 한 측벽에 설치한 정사각형 단면의 세로돌출줄눈이 흐름저항에 미치는 영향을 파악하기 위해 수리실험을 수행하였다. 돌출줄눈의 설치간격은 무차원 돌출줄눈 간격 ${\lambda}_{nv}$를 기준으로 조도유형 d형과 k형을 포함하도록 설계하였다. 흐름의 Froude 수는0.81~1.12의 범위였다. 흐름저항은 돌출줄눈의 설치간격과 유량에 좌우되었다. ${\lambda}_{nv}$가 9일 때 흐름저항이 가장 큰 것으로 나타났다. 세로돌출줄눈은 유량이 증가하면 d형 조도에서는 흐름저항을 감소시켰으나 k형 조도에서는 흐름저항을 증가시켰다. 흐름저항의 증가폭은 ${\lambda}_{nv}$이 9~12의 범위에서 상대적으로 더 크게 나타났다. 세로돌출줄눈에 의한 흐름저항은 대부분 형상저항에 의한 것이며 그 등가조도높이는 수심규모로 발생할 수 있고 흐름저항에 미치는 영향이 매우 크다. 측벽의 세로돌출줄눈은 흐름저항을 증가시키고 최대유속의 발생위치를 수로의 횡단면 중앙방향으로 이동시키는 수단으로 사용될 수 있을 것이다.

망간 노출이 흰쥐의 정소기능과 혈청 프로락틴 농도에 미치는 영향 (Effects of Manganese Exposure on the Testis Function and Serum Prolactin Concentration in Rat)

  • 이채관
    • 한국발생생물학회지:발생과생식
    • /
    • 제13권4호
    • /
    • pp.321-327
    • /
    • 2009
  • 망간은 정소 독성을 나타내며, 뇌기저핵에 작용하여 혈청 프로락틴의 농도를 증가시킨다. 그리고 혈청 프로락틴 농도 상승에 의한 과프로락틴혈증(hyperprolactinemia)은 정소의 정자 생성을 억제한다. 본 연구에서는 망간의 전신 노출이 흰쥐 정소의 정자 생산과 혈청 프로락틴 농도에 미치는 영향을 조사하기 위하여 실험동물을 대조군 $(0.0mg/m^3)$과 망간 노출군 (Mn $1.5mg/m^3$)으로 나누고, 노출군은 다시 노출 기간에 따라 4주와 13주 노출군 등 4군으로 분류하였다(n=10). 노출 기간에 따라 실험동물의 체중 변화와 사료 섭취량 등 일반적 소견 관찰, 혈액과 정소의 망간 농도, 정자의 수와 기형 등을 관찰하였다. 그리고 망간 노출에 따른 혈청 프로락틴 농도를 조사하여 망간 노출 조건에 따른 혈청 프로락틴 농도 변화 및 정소 독성을 조사하였다. 망간 노출 4주 및 13주군에서 노출기간에 따라 혈액 및 정소의 망간 농도가 유의하게 증가되었다. 대조군에 비하여 망간 노출군에서 노출기간에 따라 정자의 수가 감소되었으며, small head와 bent tail 등 기형 정자의 빈도는 증가하였다. 혈청 프로락틴의 농도는 망간 투여군에서 대조군에 비하여 유의하게 증가하였다. 그러나 실험동물의 체중 변화 및 사료 섭취량은 실험군간에 차이가 없었다. 이러한 결과들로 보아 $1.5mg/m^3$ 농도의 아만성 망간 노출은 흰쥐의 혈청 프로락틴 농도를 증가시키고, 정소 독성의 원인으로 추정된다. 그리고 전신 노출에 의한 망간의 흰쥐 정소 독성의 무유해영향농도(NOAEL)는 $1.5mg/m^3$ 이하로 예측된다.

  • PDF

얇은 박막을 얹은 TLD 반응감도의 광자 에너지에 대한 의존성 (Photon Energy Dependence of the Sensitivity of LiF TLDs Loaded with Thin Material)

  • 민병민;김수길;노준규;조영갑
    • Radiation Oncology Journal
    • /
    • 제17권3호
    • /
    • pp.256-260
    • /
    • 1999
  • 목적 : 얇은 박막을 위에 얹은 TLD 선량계의 반응 값에 영향을 미치는 인자를 조사하였고, 특히, 금속박막을 얹은 TLD 선량계의 광자에너지와 표면 흡수선량에 대한 의존성을 조사하였다. 방법 및 재료 : 본 연구에서는 TLD-100과 TLD-100 위에 얹은 Slt은 물질로는 주석, 금, 그리고 TE 플라스틱 판을 사용하였다. 각 금속 박막의 두께는 0.1 mm, TE 플라스틱 판의 두께는 1 mm였고 각 박막의 면적은 TLD-100의 면적과 같이 하였다. 방사선치료에 많이 산이는 6 MV에서 15 MV사이의 광자에너지에 대한 TLD-100의 반응감도와 금박막을 얹은 TLD-100의 반응감도, 그리고 주석 박막을 얹은 TLD-100의 반응감도를 비교해 보았다. 결과 : 금속 박막을 얹은 TLD의 경우 표면 흡수선량의 증가가 명백히 나타나고, 금 박막을 얹은 TLD의 경우 10MV에서 정상 TLD보다 약 1.83배 정도 과잉 반응하는 것으로 관측되었으며, 흡수선량에 따른 반응감도의 변화는 주석을 얹은 TLD의 경우가 가장 작았다 금속 박막을 얹은 TLD의 일반 TLD에 대한 상대 반응감도는 에너지에 대한 의존성을 거의 나타내지 않았다. 그리고 311은 박막의 조직에 대한 등가 두께에 따라 반응감도가 증가하였다. 결론 : 금속박막을 얹은 TLD 선량계의 반응값이 고 에너지(6-15 MV)에 대한 의존성을 거의 나타내지 않았으며, 흡수선량에 대한 선형성도 뛰어난 것으로 관측되었다. 따라서 금속박막을 얹은 TLD 선량계는 매우 작은 크기의 광자빔과 표면흡수선량의 측정에 매우 적합한 것으로 사료된다.

  • PDF

역상 액체 크로마토그래피에 의한 Iron(Ⅲ)porphyrin 착화합물들의 분리 및 용리거동에 관한 연구 (Separation and Elution Behavior of Some Iron(Ⅲ)porphyrin Complexes by Reversed-Phase Liquid Chromatography)

  • 강창희;김인환;이원
    • 대한화학회지
    • /
    • 제37권12호
    • /
    • pp.1035-1046
    • /
    • 1993
  • 몇 가지 iron(III)porphyrin 착화합물을 합성하고, 이들에 대하여 역상 액체 크로마토그래피에서의 최적 분리조건 및 용리거동을 조사하였다. 분리관, 흐름속도, 용리액의 조성 등을 변화시킨 실험에서 분리관은 NOVA-PAK $C_{18}$, 용리액은 methanol/water의 이성분 혼합용매를 적당히 조절하였을 때 용량인자가 최적 분리조건인 $0{\leq}logk'{\leq}1$ 범위를 만족시켰다. 용리거동에 관련된 인자들로는 용리액의 세기, 분포비$(D_c)$ 및 분리관의 온도변화에 따른 엔탈피(${\Delta}H^{\circ}$), 엔트로피(${\Delta}S^{\circ}$), 보정온도($\beta$)를 조사하여 분리 메카니즘을 규명하였다. 이성분 용매계에서 용리 세기 및 물의 부피분율과 용량인자(logk')와의 관계를 조사한 결과 이들간에는 직선성이 잘 성립되었으며, 부피비와 용량인자와의 관계에서도 비교적 직선성을 잘 나타내었다. 이러한 결과로부터 시료의 용리 메카니즘이 소용매성 효과에 기인하고 있음을 확인할 수 있었다. 또한 열역학적인 방법으로 용리거동을 조사하기 위하여, van't Hoff plot으로부터 엔탈피, 엔트로피를 구하였다. 엔탈피와 용량인자와의 상관관계를 조사한 결과 iron(III)porphyrin 착화합물과 정지상과의 상호작용은 온도변화에 과계없이 일정함을 알 수 있었고, 정지상과의 소용매성 결합 과정은 등평형 거동을 나타내었다.

  • PDF

PECVD에 의한 Sirich 산화막의 특성 (Characteristics of Silicon Rich Oxide by PECVD)

  • 강선화;이상규;박홍락;고철기;최수한
    • 한국재료학회지
    • /
    • 제3권5호
    • /
    • pp.459-465
    • /
    • 1993
  • SOG박막 밑에 층간 절연박으로 사용하는 PECVD산화막을 Si rich산화막으로 만들어 줌으로써 실리콘 dangling bond가 수소원자나 수분과 결합하여 SOG박막으로 부터 침투되는 수소원자나 수분의 확산을 억제하므로서 소작 열화되는 것을 방지한다. 이러한 Si rich산화막의 기본 특성을 알아보기 위하여 LF/HF power비와 $SiH_4/N_2O$ gas유량비를 변화시켜서 박막 특성을 조사하였다. 저주파 power만 변화시킨 경우, 증착속도가 감소하고 굴절율과 압축응력에 증가하며 FTIR에서 3300$\textrm{cm}^{-1}$~3800$\textrm{cm}^{-1}$영역의 수분에 의한 peak이 감소하는 것으로 보아 박막이 치밀해짐을 알 수 있고, $SiH_{4}$기체유량을 증가시킨 경우엔 증착속도, 굴절율, 식각속도는 증가하나 압축응력은 감소한다. FTIR에서 Si-O-Si peak의 세기가 감소하고 낮은 파수영역으로 이동하며, AES분석 결과에서 일반적인 oxide(Si:0=1:1.98)에서 보다 Si:O비가 1:1.23으로 낮아 PECVD산화 막내의 Si danling bond가 증가했음을 알 수 있었다.

  • PDF

니켈도금액중의 붕산 신속정량법 (Rapid Analysis of Boric Acid in Nickel Plating Solutions)

  • 염희택
    • 한국표면공학회지
    • /
    • 제3권1호
    • /
    • pp.7-12
    • /
    • 1970
  • Only mannitol or glycerine is generally used for the determination of boric acid in a nickel plating solution in order to make its acidic property so strong that it can be titrated with NaOH. However, these solutions give very amgiguous color change of indicator due to the precipitation of nickel salts . Therefore, only experienced dchemistsorwell trained workimen can accurately confirm the actual end point of the titratiion. For eliminating such interference of nickel salts and easily confirming the end point by any persons , the author attempted to find out a solution which produces no precipitates during the titration in these experiments, and also he tried to funish the reason for ambiguousness in titration. The following results were obtained after many experiments. (1) In any titrations which produce nickel salts such nI(oh)$_2$, the salt is formed umption very approximate to the end point, which shows some error by the consumption of titrant(NaOH) . Then, the pink color of phenolphthalein is absorbed by Ni(OH)$_2$ and the pH jumping at the end pint is also diminished to as little as less than 15% of the total phenophthalein ph range. (2) Known methods by complex salts of citrate,w hich do not produce precipitates of Ni(OH)$_2$, are also not very satisfactory, because, the pH jumping at the end point is only about 35% and the color change of phenolphthalein is form blue-green to purple-blue. (3) New method by complex salts of oxalate were attempted in these experiments. They also did not produce precipitates of Ni(OH)$_2$ and were very satisfactory in color change at the end of point was about 65% and the color change was from blue-green to purpled. In this methods, analytica cost was minimized by the use of less amounts of cheaper chemicals than the conventional citrates complex methods. The mixture of chemicals used was composed methods. The mixture of chemical used was composed of 37g/ι of sodium oxalate(Na$_2$C$_2$O$_4$$.$5H$_2$O), 2g/ι of phenolphthalein, and 400ml /ι of glycerin. The accuracy of analysis was within the error of 0.5%. (4) The procedure of analysis was as follows. One ml of nickel plating solution was taken out and to it were added 20ml of water and 20 ml of the above mixture for the indicator. The solution was titrated with 0.1N NaOH. The quantity of boric acid was calculated by the following equation. Boric acid (g/ι) = 6.184${\times}$F${\times}$ml .

  • PDF