• 제목/요약/키워드: F0 Range

검색결과 1,444건 처리시간 0.033초

투명전도성 ZnO 박막의 특성에 미치는 In2O3 첨가에 따른 영향 (Effect of In2O3 Doping on the Properties of ZnO Films as a Transparent Conducting Oxide)

  • 이춘호;김선일
    • 한국세라믹학회지
    • /
    • 제41권1호
    • /
    • pp.57-61
    • /
    • 2004
  • Zinc Oxide (ZnO)은 wurtzite 결정구조를 가지고 있으며, 밴드갭 에너지가 약 3.3eV로 반도성 산화물이다. $In_2O_3$이 첨가된 ZnO 박막을 점자빔증착법을 이용하여 1737F 유리기판에 제조하였다. $400^{\circ}C$의 증착온도에서 $In_2O_3$의 첨가량에 따른 ZnO 박막의 결정성, 미세구조를 비롯한 전기.광학적 특성을 조사하였다. 첨가되는 $In_2O_3$의 양에 따라 투명전도성 산화막으로써의 ZnO 박막의 특성이 변화되었다. $In_2O_3$의 첨가량이 감소할수록 비정질상에서 결정성의 ZnO 막을 얻을 수 있었다. 0.2at%의 $In_2O_3$가 첨가된 출발물질에서 제조된 $In_2O_3$-doped ZnO막은 약 $6.0 {\times} 10^{-3} {\Omega}cm$ 정도의 비저항값과 가시광선 영역에서 85% 이상의 광투과도를 나타내었다.

5급 와동에서 수종의 상아질 접착제에 따른 미세누출의 비교 (THE COMPARISON OF MICROLEAKAGE OF CLASS V COMPOSITE RESIN RESTORATIONS WITH VARIOUS DENTIN BONDING SYSTEMS)

  • 임연희;이희주;허복
    • Restorative Dentistry and Endodontics
    • /
    • 제26권2호
    • /
    • pp.153-161
    • /
    • 2001
  • The purpose of this study was to evaluate microleakage of six current dentin bonding systems. In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of thirty extracted human molars. Each margin was on enamel and dentin/cementum. Experimental teeth were randomly divided into six groups of 5 each. Group 1 : Scotchbond Multi-Purpose; Group 2 : Single Bond; Group 3 : Prime&Bond NT ; Group 4 : Clearfil Liner Bond 2 ; Group 5 : MAC Bond II ; Group 6 : One-up Bond F. The bonding agent and composite resin were applied to class V cavities according to manufacturer's directions. After thermocycling, the specimens were immersed in 0.5% basic fuchsin dye solution for 6 hours and sectioned longitudinally through the center of the restoration with a low speed diamond saw. The degree of microleakage was measured as the extent of dye penetration under the stereomicroscope at $\times$20. The data were analyzed using one way ANOVA. When significant differences found. multiple comparisons were made using Duncan's Multiple Range Test. The results of this study were as follows: 1. In all groups, leakage value seen at the enamel margin was significantly lower than that seen at the dentin margin(P<0.001). 2. At the enamel margin, none of the dentin bonding systems used in this study showed statistically significant difference in leakage values(P<0.05). 3. At the cementum margin, group 3 showed the highest leakage value, and others were decreased as group 5, 6, 4 in that order, and group 1, 2 showed the lowest leakage value. There was statistically significant difference between group 3 and the other groups except for group 5(P<0.05).

  • PDF

트리에탄올아민을 錯化劑로 사용한 無電解니켈鍍金浴의 析出速度에 관한 硏究 (Depositing Rate of Electroless Nickel Plating Bath Contained Triethanolamine as a Complexing Agent)

  • 여운관
    • 한국표면공학회지
    • /
    • 제18권4호
    • /
    • pp.153-163
    • /
    • 1985
  • In the electroless nickel plating bath which contained nickel sulfate, sodium hypophosphite, boric acid and triethanolamine, effect of their concentration on the rate of deposition was tested by gravimetric method and polarization method. The polarization method that polarize small range of voltage anodicaly and cathodicaly at the mixed potential in the electroless plating bath can calculate mixed current (depositing rate) from $i_{mp}=\frac {i}{\eta}\;\frac{RT}{nF}\;or\;i_{mp}=\frac{i}{\eta}\;\frac{1}{2.3}(\frac{b_a\;\;b_c}{b_c+b_a})$ Where $i_{mp}$ is the depositing current, i is the polarized current, ${\eta}$ is the polarized voltage, $b_a\;and\;b_c$ are the Tafel slop of anodic and cathodic polarization curves respectively. The calculated mixed current ($i_{mp}$) is proportional to the depositing rate obtained by gravimetric method and corresponded mostly to the real depositing rate by multifying supplementary constant. The polarization method can be used for founding inclination of reaction on various concentration of each composition. Decreasing or increasing concentration of triethanolaminc as a complexing agent , the depositing rate is decreased and when the bath contained 25-50mL/L of triethanoloamine, the depositing rate is increased. The depositing rate is increased with increasing the concentration of boric acid, and when the bath contained 0.5M of boric acid, the depositing rate is increased abruptly. The optimum composition of the electroless nickel bath was estimated 0.1M of nickel sulfate, 0.25M of sodium hypophosphite, 0.5M of boric acid, and 25-50mL/L of triethanalamine.

  • PDF

Development and Assessment of New RT-qPCR Assay for Detection of HIV-1 Subtypes

  • Lim, Kwanhun;Park, Min;Lee, Min Ho;Woo, Hyun Jun;Kim, Jong-Bae
    • 대한의생명과학회지
    • /
    • 제22권3호
    • /
    • pp.83-97
    • /
    • 2016
  • The measurement of viral load in HIV-1 infected patients is essential for the establishment of a therapeutic strategy. Several commercial assays have shown shortcomings in quantifying rare genotypes of HIV-1 such as minor groups of N and O. In this study, the HIV-1 RT-qPCR assay was developed. The primers and probe of HIV-1 were designed to target the pol gene and to increase the detection efficiency of various subtypes including group N and O. The HIV-1 quantitative RT-qPCR assay was assessed for its analytical performance and clinical evaluation. The LoD was determined to 33.9 IU/ml. The LoD of several subtypes including A, C, D, CRF_01AE, F, CRF_02AG, G and H, were determined to less than 40 IU/ml. The HIV-1 quantitative RT-qPCR assay was evaluated using the China National Reference Panel of HIV-1 RNA to determine the analytical performance. The results were all within the acceptable range. The clinical evaluation was performed at Hunan CDC in China. The clinical evaluation results were compared with those of the China domestic commercial kit. A significant correlation (fresh samples; $R^2=0.84$, P<0.001, frozen samples; $R^2=0.76$, P<0.001) between the two systems was observed for 64 fresh samples and 76 frozen samples with viral loads, and the Bland-Altman plot showed good agreement (98.4%, 96.1%, respectively). In conclusion, the HIV-1 quantitative RT-qPCR assay had comparable analytical performance with several commercial kits. The study provides basic data for the research of HIV-1 diagnosis and the development of P < HIV-1 molecular diagnostic assay.

Evaluation of Tinda Gourd (Praecitrullus fistulosu) Germplasm's Yield

  • RAHEEL, Asfand;KHAN, Nasir Ahmad;BABAR, Raheel;ULLAH, Muhammad Arshad;ZAFFAR, Ali;IQBAL, Maouz;ASHRAF, Usman
    • 식품보건융합연구
    • /
    • 제5권3호
    • /
    • pp.1-5
    • /
    • 2019
  • The field experiment was conducted in vegetable area, Institute of Horticultural Sciences in University of Agriculture, Faisalabad in order to recognize morphological and fruit growth pattern and yield of Tinda (Praecitrullus fistulosus) gourd germplasm lines. Sixteen germplasm lines in which one line is used as check are included were sown and grown on flat beds in field. The field experiment was arranged as randomized complete block design (RCBD) with three replications. Data on days to maturity, fruit per vine, fruit weight in grams, fruit diameter and total yield obtained were recorded. The fruit texture is marked as phenotype parameter. All parameters were collected and then analyzed statistically. All lines and replications showed different results among each other according to parameter. The maximum DTM (days to maturity), F/P (fruit per plant), FW (fruit weight), FD (fruit diameter) and Yield were recorded was $L_0$ (68.66), $L_3$ (1.66), $L_{10}$ (248.33), $L_{13}$ (8.50) and $L_0$ (599.33) and the minimum were recorded was $L_1$ (56), $L_{11}$ (0.33), $L_0$ (198), $L_9$ (7) and $L_4$ (421) grams respectively. All lines showed smooth texture of fruits with no hairs when mature at harvesting stage.

Comparison of different colorimetric assays and application of the optimized method for determining the liberated fluoride contents in various tea extracts

  • Le-Thi Anh-Dao;Do Minh-Huy;Nguyen-Ho Thien-Trang;Nguyen Cong-Hau
    • 분석과학
    • /
    • 제37권2호
    • /
    • pp.87-97
    • /
    • 2024
  • The appropriate intake of fluoride (F-) is beneficial to human health; however, the over-consumption can result in various potentially harmful effects. This study compared different colorimetric reagents, i.e., aluminium-xylenol orange (Al-XO), zirconium-xylenol orange (Zr-XO), and zirconium-alizarin red S (Zr-ARS), for fluoride measurements by the UV-Vis, in terms of reaction mechanisms, method sensitivity, and interferences from aluminium and ferric ions. The colorimetric procedures were optimized, and the analytical methods were evaluated. The goodness of linearity (R2 > 0.998) was obtained for all three assays within the concentration range of 1.0-20.0 mg/L fluoride in deionized water, in which the method sensitivity followed the descending order of Zr-XO > Al-XO > Zr-ARS. The Zr-XO was applied for determining the fluoride in different tea extracts in water (90 ℃ and 60-minute-brewing) and black tea demonstrated the highest fluoride content (3.0-3.6 mg/L). The effects of brewing time and temperature on the release of fluoride in the tea extracts were also investigated, indicating these are critical factors for the fluoride extraction. This study highlighted the application potentials of the UV-Vis measurement as a simple, convenient, and cheap analytical approach and discussed different colorimetric reagents used for fluoride determination in tea extracts in the context that the UV-Vis spectrophotometers are commonly equipped in most laboratories.

Al-$SiC_f$ 복합재료에서 보강재의 coating처리가 젖음성에 미치는 영향 (A Study on Wetting Behaviors of Al-Coated $SiC_f$ Composite)

  • 김균영;이경구;최답천;이도재
    • 한국주조공학회지
    • /
    • 제14권3호
    • /
    • pp.274-284
    • /
    • 1994
  • SiC fibers were coated with Cu, Ag and Ni metallic thin films by magnetron sputtering in order to improve wetting properties between Al matrix and SiC fiber. The wetting behavior of metal coated SiC fiber by pure Al has been studied at $670^{\circ}C{\sim}900^{\circ}C$ range for $10{\sim}90min$. under vacuum atmosphere. Besides, the effect of coated film thickness on the wettability has been investigated. The wetting behavior and interfacial reaction between Al and SiC fibers were analysed with optical microscope and SEM (scanning electron microscope). The wetting behavior of the as-received SiC fiber with Al melt was not uniform, indicated by the contact angles from less than $90^{\circ} to more Al melt was appeared in the initial stage of reation. It was considered that the metallic thin film played an important role in reducing the interfacial free energy and breaking down the aluminum oxide film by eutectic reaction with Al melt. However the wettability of Ni coated SiC fiber was not improved as much as that of Cu or Ag coated SiC fiber. The improvement of wettability by coating thickness is clearly showed in $1{\mu}m$ coated SiC fiber compared with $0.25{\mu}m$ coated SiC.

  • PDF

도시거주 중년기 성인의 노화에 대한 기대와 신체활동과의 관련성: Pender의 건강증진모델을 기반으로 (Relationship between Expectations Regarding Aging and Physical Activity among Middle Aged Adults in Urban Areas: Based on the Pender's Health Promotion Model)

  • 조성혜;최문기;이주희;조혜원
    • 대한간호학회지
    • /
    • 제45권1호
    • /
    • pp.14-24
    • /
    • 2015
  • Purpose: The purpose of this study was to measure the level of expectations regarding aging (ERA) and identify relationship between ERA and physical activity of middle aged adults. Methods: Participants were middle aged adults who resided in the community in three cities in Korea. Data were collected using questionnaires that contained items on individual characteristic, International Physical Activity Questionnaires (IPAQ), and behavior-specific cognitive factors including ERA-12. Hierarchical multiple regression was conducted to examine whether ERA would predict physical activity by controlling other factors. Results: The mean age of the participants was $51.1{\pm}6.9$ years. The mean score for ERA (possible range=0 to 100) was $40.04{\pm}14.31$. More than half of the participants (62.6%) were not engaged in health promoting physical activity. Gender, employment status and exercise confidence were associated with level of physical activity (F=7.14, p<.001, $R^2=.36$). After controlling for individual factors and behavior-specific cognitive factors, ERA was independently related to physical activity (F=7.19, p<.001, $R^2=.38$). Conclusion: The results demonstrate that individuals' belief about aging has effects on physical activity in Korean middle aged adults. Thus, nursing interventions which focused on ERA could help enhance physical activity in middle aged adults.

원적외선 대역 4 : 1 줌 망원경 광학계 설계 (Design of 4:1 I$\mathbb{R}$ zoom afocal telescope)

  • 김현숙;김창우;홍석민
    • 한국광학회지
    • /
    • 제9권3호
    • /
    • pp.134-141
    • /
    • 1998
  • 원적외선인 7.6$\mu$m 과정대역에서 회절한계 성는을 만족하는 무초점 줌 망원경 광학계응 설계하였다. 기계보정식 4군 줌 방식을 적용하여 줌 대물부 설계하였으며 접안부는 고정초점 렌즈를 구성하였다. 망원경의 줌 비(zoom ratio)는 4.05로 배율을 2.0배에서 8.1배까지 연속적으로 가변할수 있으며, 총 5개의 렌즈군에 9매의 렌즈로 구성하였다. 줌 대물부는 F/1.3의 텔리포트 형태로 설계하여 최고배율 초점거리에 비해 광학계의 길이가 작아 시스템 적용성이 우수하도록 하였으며, 초점조절 렌즈를 줌밍 렌즈군의 뒤에 놓아 물체까지의 거리에 따라 초점을 조절하도록 설계하였다. 광학계에 사용된 재질은 색수차 보정을 위하여 대물부의 렌즈 1매만 ZnSe를 적용하고 나머지 헨즈는 모두 Ge을 적용하여\ulcorner며, 총 18면의 곡률중 1면만 비구면을 적용하고 나머지 면은 모주 구면을 적용하였다. 설계된 망원경의 8.1배율에서의 시야는 $\pm$2.31$^{\circ}$,대물부 유효구경은 163mm이며, 모든 배율에서 회절한계 성능을 만족하는 것으로 평가하였다.

  • PDF

SUS 304鋼 의 크리이프 溫度領域 에 관한 時間依存型 및 사이클依存型 疲勞크랙 傳播 의 遷移 (Transition from Cycle-Dependent to Time-Dependent Fatigue Crack Propagation at Creep Temperature of SUS 304 Steel)

  • 유헌일;주원식
    • 대한기계학회논문집
    • /
    • 제9권5호
    • /
    • pp.539-547
    • /
    • 1985
  • 본 논문에서는 이상과 같은 연구현상을 배경으로 응력비 R.geq.0인 사인응력파 에서도 사이클의존형 크랙전파가 공존하는가, 공존한다면 그 전이를 결정짓는 조건을 구하기 위해, 대표적인 고온용 재료인 SUS 304강을 이용하여 온도 650.deg. C, 대기중에서 반복속도 .nu., 응력비 R, 응력레벨 .sigma.$_{maxo}$등의 실험조건을 바꾸어 고온저사이클 피로실험을 하였다. 또 이 현상의 기초과정을 이해하는데 도움을 주기 위하여 파면 관찰을 행하였다.