• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.208-213
• /
• 1994

Wide-band absorbency and small layer thickness are required in the high- performance microwave absorber. In order to reduce the thickness of the absorber, ferrite-iron-rubber composites were proposed and its properties were investigated. The increase in both real part of perrreability and permittivity of the composites were observed with addition of -Fe powder and this behavior results in the decrease of fm dm term. The matching thicknesses of ferrite-iron-ruber composites were relatively small(0.5~2.0 mm) in the frequency range of 3~17 GHz as comIBfed to than that of ferrite-rubbr composit.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.4
• /
• pp.135-142
• /
• 2009

In this thesis, we designed and implemented a tracking filter which can be used for FH/2-FSK communication system in band of 40~60[MHz]. After measuring a performance of a tracking filter, an insertion loss was measured from 3.7 to 4.3 dB, depending upon a hopping center frequency. The 3 dB bandwidth of a tracking filter was specified 5.1 to 5.33% depend upon a hopping and 30/3 dB shape factor indication for interrupting property of a filter shows 6.828 to 6.98 satisfying a required specification. Also the attenuation $2{\times}f_0$, the characteristic parameter for interference degree, was specified 46~52dB, not satisfying a required specification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1890-1896
• /
• 2008

In this paper, the Si vertical Hall devices ale fabricated by using standard bipolar process and investigated in terms of the opeating and noise properties. The sensitivity of device with P+ isolation dam(type B) has been increased up to about 1.2 times compared to that device without the dam also noise has been increased. With the condition of f=I[KHz], band-width 1[Hz], the resolution of magnetic-field detection were about $0.97[{\mu}T]$/ type B and $1.25[{\mu}T]$/ type A, respectively, thus we must consider correlation the low noise or good resolution and high sensitivity in the situation for device geometry design or even for the materials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.620-625
• /
• 2003

The coplanar waveguide bandpass filter using folded-line stepped-impedance resonators(SIRs) is proposed. The folded-line SIR has about λ/8 length using the short-circuited end on coplanar waveguide. It make that the bandpass filter has the half size in comparison with general λ/4 SIR filter. In this paper, we derive the equivalent circuit and design the bandpass filter by using that. We design and fabricate the bandpass filter which has 5 GHz center frequency and 3 % fractional bandwidth. The measurement results fur 4-pole folded SIR bandpass filter agreed well with full-wave simulation and equivalent circuit results. The fabricated bandpass filter has a good spurious characteristic, which the harmonic frequency appeared at 2.5f$\_$0/). The proposed folded-line SIR bandpass filter are applicable for MMIC and High-Tc superconducting filters. bandwidth.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.17-24
• /
• 2005

We fabricated PIN-Photodiodes with a single mode fiber for analog communications and analyzed characteristics of the devices. The fabricated PIN-Photodiode shows a bandwidth of 1.5 GHz, a dark current of 20 p4 a capacitance of 0.48 pF, and the responsivity of 0.9 V/W, a second order distortion of -72 dBc. In this paper, we developed a new optical Packaging technology that is aligning in real-time monitoring of both responsivity and IM2 characteristics. As a result responsivity has been improved by 0.03 V/W, and also U has been improved by $3\~5\;dBc$. On the other hand, failure ratio has been reduced by $3.5\%$.

• Smart Media Journal
• /
• v.12 no.2
• /
• pp.66-75
• /
• 2023

Recently, the number of cloud web applications is increasing owing to the accelerated migration of enterprises and public sector information systems to the cloud. Traditional network attacks on cloud web applications are characterized by Denial of Service (DoS) attacks, which consume network resources with a large number of packets. However, HTTP DoS attacks, which consume application resources, are also increasing recently; as such, developing security technologies to prevent them is necessary. In particular, since low-bandwidth HTTP DoS attacks do not consume network resources, they are difficult to identify using traditional security solutions that monitor network metrics. In this paper, we propose a new detection model for detecting HTTP DoS attacks on cloud web applications by collecting the application metrics of web servers and learning them using machine learning. We collected 18 types of application metrics from an Apache web server and used five machine learning and two deep learning models to train the collected data. Further, we confirmed the superiority of the application metrics-based machine learning model by collecting and training 6 additional network metrics and comparing their performance with the proposed models. Among HTTP DoS attacks, we injected the RUDY and HULK attacks, which are low- and high-bandwidth attacks, respectively. As a result of detecting these two attacks using the proposed model, we found out that the F1 scores of the application metrics-based machine learning model were about 0.3 and 0.1 higher than that of the network metrics-based model, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.98-104
• /
• 2006

In this parer, proposed a Miniature inverted F Antenna for Bluetooth applications using folded structure and confirm it through producing and measurement. The proposed antenna as PIFA is optimized the impedance matching and the radiation pattern by positioning of feed line and short line. This antenna is designed with Microwave Studio presented CST and the optimized antenna structure is fabricated. The optimized miniature antenna size is 17.3 * 6 * 0.8 mm, the measured return loss bandwidth is 220MHz at 2.45GHz, the radiation pattern is quasi omni, and the gain is -1 dBi. these results are similar to the simulation data. It is comparatively appropriate for Bluetooth system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.811-820
• /
• 2006

Ultra wideband CPW batons are proposed in this paper. The proposed talons are consisted of ultra wideband multi-stage Wilkinson dividers and 'X'-shaped $180^{\circ}$ out-of-phase generator. Bottom-bridges and via-holes are used to connect CPW ground lines instead of the conventional air-bridges which require troublesome manual working in fabrication with HMIC(Hybrid Microwave Integrated Circuits) substrates. The proposed CPW batons have ultra wideband of 3 or $10(=F_{figh}/F_{low})$ theoretically, the wideband characteristics and S-parameters of the basis Wilkinson divider are directly converted to those of the proposed batons. The proposed batons are so compact and small compared to the conventional Wilkinson batons because no additional area for out-of-phase section is required. So the size of the proposed batons is exactly the same as that of the basis Wilkinson dividers. As examples, 3-stage and 7-stage wideband Wilkinson dividers are converted to the proposed batons. Their measured operating bandwidth are $1\sim3GHz$ and $0.8\sim5GHz$, respectively, with excellent matching, isolation and power division performances. The measured magnitude and phase balance errors are ${\pm}0.5dB\;and\;0.45\;dB,\;and\;{\pm}5^{\circ}\;and\;{\pm}10^{\circ}C$ over $1\sim3GHz\;and\;0.8\sim5GHz$, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.6
• /
• pp.53-61
• /
• 1993

이 논문은 접은 도체박판의 단순한 구조가 전자유도형 변환기 역할을 한다는 것을 기술하고 있다. Endoh 등은 볼록한 나선코일과 동박판으로 구성된 볼록한 방사면 모양을 한 전자유도형 변환기가 시간적으로 짧은 충격파를 발생할 수 있기 때문에 뚜렷한 초음파 영상을 얻을 목적으로 Eisenmenger에 이어 전자유도형 EMAT를 보고한 바 있다. 여기서는 코일이 없는 EMAT를 소개한다. 이것은 두께 0.05mm, 폭 5cm 길이 임의의 동박판으로 구성되며 동박판은 절연도료를 칠한 종이로 절연되고 접어서 견고하게 밀착시키며, 여러번 접는 경우는 손부채처럼 접는 방향은 교대로 반대방향으로 접는다. 그리고는 엷은 고무판을 표면에 밀착시키고 연변을 실리콘 충전제등으로 고정시키거나, polyester molding을 하여 표면을 concave형으로 하여 완성하였다. 완성된 EMAT들은 수조에서 축전기방전방식으로 실험을 하였으나 EMAT에서 발생되는 으파의 진폭은 접는 회수에 비례하였으녀, 단접형 EMAT보다 다접형 EMAT의 발생음파가 보다 강력하였다. Concave형 EMAT의 음속은 예견한 바와 같이 잘 집속되었다. 그러나 평판형의 경우는 지향성은 100도로서 넓은 지향각을 나타내었다. 2μF, 600Volt의 축전기 방전에 의한 집속형 concave EMAT를 여기시키기 위한 축전기의 용량이 작을수록 대역폭은 더욱 넓었다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2291-2293
• /
• 2005

본 논문에서는 평면 역F 안테나(PIFA)형태의 단일 안테나로 2GHz 대역과 5GHz 대역의 무선 근거리통신망의 주파수 대역을 수용할 수 있는 안테나를 설계 제작하였다. 안테나의 크기를 줄이기 위해 안테나 Element는 Meander Line을 이용하여 설계하였다. 측정 시 반사손실 10dB(VSWR=2.0)를 기준으로 2GHz 대역에서 10.8%와 5GHz대역에서 12.7%의 대역폭을 얻었다.