• 대한토목학회논문집
• /
• 제4권1호
• /
• pp.93-101
• /
• 1984

본(本) 논문(論文)에서는 일정변단면장주(一定變斷面長柱)의 탄성임좌굴하중(彈性臨挫屈荷重)을 구하는 각산식(咯算式)을 제시(提示)하였다. 특히, 고가도로설계시(高架道路設計時) 자주 나타나는 일단고정(一端固定) 타단자유(他端自由)인 중실원형(中實圓形) 및 구형단면(矩形斷面)에 한(限)하였다. 처짐곡선 미분방정식(微分方程式)의 정밀해(精密解)는 Bessel 함수(凾數)로 나타나는데, Bisection method를 이용하여 Computer로 수치해석(數値解析)하였다. 또 자중(自重)고려시 F.E.M에 의한 해석(解析)은 고유치(固有値) 문제(問題)가 되므로 Jacobi method를 이용하여 수치해석(數値解析)하였고, 균일단면장주(均一斷面長柱)의 정밀해(精密解)와 비교(比較)하여 F.E.M에 의한 근사해(近似解)의 신뢰도(信賴度)를 높였다. 그 결과(結果) 일정변단면장주(一定變斷面長柱)의 임계좌굴하중(臨界挫屈荷重)은 형상계수(形狀係數)와 단면변화율(斷面變化率)에 대해 균일단면장주(均一斷面長柱)의 비례식(比例式)으로 나타낼 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.684-687
• /
• 2001

본 논문에서는 이동통신 시스템에서 성능 열화의 주요 원인인 주파수 선택성 페이딩과 전자기기에서 발생하는 임펄간 간섭 환경에서 DS/CDMA 시스템의 성능 개선을 정량적으로 분석하였다 시스템으로 고려한 변식은 비동기식 MFSK와 MDPSK를 이용한 MFSK-MBPSK 결합변조 방식이다. 분석 결과, 선택성 페이딩에서 합성변조 시스템에 대하여 E$_{b}$/Nn$_{o}$ =20일 때를 기준으로 한 경우, M$_{f}$ =4, M$_{p}$=2인 경우가 가장 성능이 좋았으며, 그 다음으로 M$_{f}$ =2, M$_{p}$=4인 경우, 그리고 M$_{f}$ =4, M$_{p}$=4인 순서대로 오율 성능이 좋았다. 그리고 MRC 다이버시티 기법 및 부호화 기법을 채용한 경우 효과적으로 시스템 성능의 열화를 보상할 수 있었다. 또한, 합성변조기법을 사용함으로써 강한 임펄스 환경에서도 만족할 만한 시스템 성능을 얻을 수 있었다.

• Toxicological Research
• /
• 제9권2호
• /
• pp.153-158
• /
• 1993

Pyridine and acetone are efficacious inducers of CYP2E1 in both rats and rabbits. The response in the elevation of CYP2E1 levels, changes in CYP2E1 mRNA levels, and enhanced translational processing of hepatic CYP2E1 mRNA during the early phase of CYP2E1 induction by the solvents pyridine and acetone were examined. Time-depen-dent incease in CYP2E1 levels occurred at early times (6-24h) following a single dose of pyridine treatmene, as assessed by Western immunoblot analysis, whereas the levels in CYP2E1 mRNA transiently decreased at 12h post-treatment, returning to the level present in untreated animals.

• Bulletin of the Korean Chemical Society
• /
• 제4권2호
• /
• pp.92-95
• /
• 1983

The addition products of glutathione to ${\beta}$ -nitrostyrene derivatives were synthesized. ${\beta}$ -Nitrostyrene (1a), p-methyl-${\beta}$-nitrostyrene (1b), 3,4,5-trimethoxy-${\beta}$-nitrostyrene (1c), o-, m- and p-chloro-${\beta}$-nitrostyrene (1e, 1f, 1g) and o-, m- and p-methoxy-${\beta}$-nitrostyrene (1h, 1i, 1j) undergo addition reactions with glutathione to form S-(2-nitro-1-phenylethyl)-L-glutathione (5a), S-[2-nitro-1-(p-methyl)phenylethyl]-L-glutatione (5b), S-[2-nitro-1-(3', 4', 5'-trimethoxy)phenylethyl]-L-glutathione (5c), S-[2-nitro-1-(o-chloro)phenylethyl]-L-glutathione (5e), S-[2-nitro-1-(m-choro)phenylethyl]-L-glutathione (5f), S-[2-nitro-1-(p-chloro)phenylethyl]-L-glutathione (5g), S-[2-nitro-x-(o-methoxy)-phenylethyl]-L-glutathion e(5h), S-[2-nitro-x-(m-methoxy)phenylethyl]-L-glutathion e (5i), and S-[2-nitro-1-(p-methoxy)phenylethy])-L-glutathione (5j), respectively. The structure of adducts were identified by UV and IR-spectra, molecular weight measurement, and elemental analysis.

• 대한조선학회지
• /
• 제20권4호
• /
• pp.17-24
• /
• 1983

In this study, it was investigated the distribution of residual stress in the direction of loading between the root and toe the load fillet welds for thick steel plate. Residual stress distributions are measured by sectioning method which is one of stress-relaxation technique in welded joint, and analyzed by two dimensional finite element method on thermo-elasto-plastic theory under plane stress condition. These are compared the results of F.E.M analysis with the experimental result by stress-relaxation techniques. As a results, the following conclusion were obtained. (1) In the no penetration fillet welded joint specimen using mild steel plate with 25mm in thickness, the residual stress of loading direction near the root was about $10kg/mm^2$ tensile. (2) The tensile residual stress has been observed in fillet region of the fillet joint by F.E.M. analysis method. (3) The range of compressive residual stress distribution from the root was largest in the case of 5mm root penetration.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.67-75
• /
• 1998

This study aimed at he experimental and finite element analytic investigation of the effect of preheating on he residual stress of weldment. In this study, an autogenous arc welding was used on type 304 stainless steel and MARC as F.E.M. common code was utilized in analysis The analyses include transient and moving heat source and thermal properties as function of temperature. During welding, the thermal cycles of four locations in the weldment were recorded to investigate of the behavior of thermal stress and residual stress. The experimental and analytic results had good coincidence and show that there are two factors influencing the formation of welding residual stress in preheat process. One is the elevation of welding equilibrium temperature and the other is the increase of amount of heat input. The former decrease welding residual stress and the latter increase welding residual stress. Therefore, the cumulative effects result in the welding residual stress not being improved significantly with preheating in 304 stainless steel.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.42-49
• /
• 1999

Because the linear elastic tincture analysis has been proved to be insufficient in predicting the failure of cracked bodies, in recent years, a number of fracture concepts have been studied which remain applicable in the presence of large-scale plasticity near a crack tip. This work thereby presents a new finite element model, as accurate as possible, to analyze plane problems of ductile fracture under large-scale yielding conditions. Based on the incremental theory of plasticity, the p-version finite element analysis is employed to account for the values of J-integral, the most dominant fracture parameter, and the shape of plastic zone near a crack tip by using the J-integral method and equivalent domain integral method. The numerical results by the proposed model are compared with the theoretical solutions in literatures and the numerical solutions by the i,-version of F.E.M.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.102-106
• /
• 2003

An experimental modal analysis and dynamic stiffness evaluation of a moving body structure of a high speed machining center are presented in this paper. The natural frequencies and corresponding modes, and dynamic compliance of a moving body structure of high speed machining center are investigated by using F.E.M., hydraulic exciter test, and impulse hammer test. The lowest three natural frequencies were found to be 56.6 Hz, 112.7 Hz, and 142.7 Hz by FEA respectively, while those were 55 Hz, 112 Hz, 131 Hz by experimental analysis. Furthermore, both computed and measured absolute dynamic compliances of the moving body structure in iso-direction showed good agreement especially at the first two mode frequencies. With our experimental data, the dynamic characteristics of the machining center can be exploited to get a new development of structural dynamic design and modification.

• 대한전기학회논문지
• /
• 제41권7호
• /
• pp.723-734
• /
• 1992

In this paper, the characteristics of IPMSM(Interior-type Permanent Magnet Synchronous Motor) are simulated using 2-D. finite element method. This paper deals with the following characteristics : air gap flux density considering skew, back e.m.f., torque and inductance. Back e.m.f. is calculated using the flux obtained from the vector potential of FEM solution. Torque is calculated using improved Maxwell stress tensor method and current angle which is obtained from the controller. Direct axis inductance and quadrature axis inductance are also calculated using energy perturbation method. Computed results are found in satisfactory agreement with experimental ones. This method also can be applied for the computation and analysis of the characteristics of SPMSM, current-excited synchronous motor and reluctance motor.

• 기계저널
• /
• 제32권6호
• /
• pp.496-503
• /
• 1992

상사실험법(analogous experimental method)이라 함은 물리적현상을 다른 물리적현상으로 변환 하여, 후자를 실험적으로 측정하여 전자의 제반 물리량을 얻는 과정을 말한다. 이 때 두 물리량 사이에는 수학적 상사관계, 특히 미분방정식 상의 유사관계가 성립함을 전제로 한다. 일반적으로 임의형상의 내부응력을 실험적으로 해석하는 데는 탄소성 변위를 직접 전기적저항으로 바꾸어 측정하는 방법(strain gauge method)이나 광파의 간섭무늬(fringe)로 가시화하는 광탄성 법(photoelastic method), 또는 전자계산기를 이용하여 분할요소해석의 연계집적으로서 얻는 유 한요소법(F.E.M) 등이 널리 사용되고 있으나, 이들은 다같이 그 나름대로의 장단점을 지니고 있다. 전기저항식은 변형을 직접 측정할 수 있어 측정의 오차를 줄일 수 있고, 특히 실물측정과 동하중 해석에는 큰 강점이 있으나, 점해석(point by analysis)이기 때문에 전시야적인 분포를 파악하기 어렵다. 또한 광탄성법은 명료한 전시야적 분포를 얻을 수 있지만 모형해석(model analysis)이기 때문에 정밀한 모형제작의 어려움이 수반되며, F.E.M.(B.E.M.도 포함)은 복잡한 형상에서의 요소분할이 매우 어렵고, 경계조건의 정확한 설정에 문제가 있다. 따라서 여러 실험적 방법은 실측대상에 따라 그 장단점을 감안하여 선택되어야 하며, 이 글에서 논술하고자 하는 상사실험법에 의한 응력해석도 이러한 관점에서 지금까지의 일련의 연구결과를 종합하여 그 효 용적인 용도, 응용 및 그 전망과 더불어 장차 해결하여야 할 2,3의 문제를 제시하고자 한다.