• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.143-150
• /
• 2018

This work conducted the experimental analysis on ultrasonic acoustic matching in order to measure the accuracy of gaseous fuel level values. The experimental devices were used as 12V-DC supply, control T1 board, oscilloscope (DS01072B), ultrasonic probe and pattern table. The research models were designed by ceramic assay which can determine the transmitting and receiving energies. The result of the ringing area could verify the increased characteristics in the order of D (0.180m) < E (0.184m) < B (0.204m) < A (0.234m) < F (0.244m) < C (0.247m) models based on initial 2.9V of the maximum peak voltage. From the experimental results, the model designed by Ø21*3+2t of the matching layer was notable in that the most outstanding directivity energy could be created.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.187-194
• /
• 2005

An analysis of the 1/f or flicker noise in FD n-channel Double Gate SOI MOSFET is proposed. In this paper, the variation of power spectral density (PSD) of the equivalent noise voltage and noise current with respect to frequency, channel length and gate-to-source voltage at various temperatures and exponent $C(i.e\;1/f^c$ is reported. The temperature is varied 125 K from to room temperature. The variation of PSD with respect to channel length down to $0.1{\mu}m$ technology is considered. It is analyzed that l/f noise in FD n-channel Double Gate SOI MOSFET is due to both carrierdensity fluctuations and mobility-fluctuations. But controversy still exits to its origin.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.81-85
• /
• 2003

PU block polymers are constituted by sequences of constitutional units CU which are : a diisocyanate T, a polyol or a polyamine V, an extensor E .Due to the CU different solubility parameters ,hard and soft micro domains are formed;they can aggregate into different phases. A linear PU can be described by two parameters R=T/N and $R_{E}$=(R-1)V/E.A stoichiometric model is proposed which gives the general formula of all the possible PU: X((TV)$_{k}$(TE)$_{n}$)$_{m}$X , where k and m can be calculated from the experimental molecular weights respectively of pre polymer and polymer and n= R-1.Physical properties depend on PU composition and on nature of CU. I.R. analysis is useful for discovering the hydrogen bonds location : DSC gives informations on the presence of the different phases .PALS analysis shows that nano cavities become tighter on increasing n. A series of particular Pus ,obtained from :TDI, a low molecular weight polyol, a cyclic extensor, at different R and RE was prepared and analysed. These PU are amorphous, monophasic and appear to be good candidates for membranes.nes.nes.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.23-26
• /
• 1999

The Langmuir adsorption isotherm at the $(Pt)/0.1M\;H_2SO_4$ electrolyte interface has been qualitatively analyzed using the ac impedance measurement and phase-shift method. The phase shift $(\phi)$ depends on both the cathode potential (E<0) and frequency (f) and is inversely proportional to the factional surface coverage $(\theta)$. At an intermediate frequency band (ca. $1\~100$ Hz), the phase-shift profile $(\phi\;vs.\;E)$ can be related to the fractional surface coverage $(\theta\;vs.\;E)$. The phase-shift profile $(\phi\;vs.\;E)$ can be used as an experimental method to estimate and analyze the Langmuir adsorption isotherm $(\theta\;vs.\;E)$. The equilibrium constant (K) and the standard free energy $({\Delta}G_{ads})$ of the adsorbed hydrogen atom $(H_{ads})\;and\;3\times10^{-4}$ and 20.1 kJ/mol, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.325-328
• /
• 2004

This paper deals with void crushing behavior by ingot forging process which consists of sequential operations of upset forging and bloom forging. The predicted results of void crushing behavior by the simplified global-local method using F.E. analysis showed that the inherent void at the top region of the ingots remains incompletely crushed even after several forging operations. From the results of the hot upset forging test using the billets with drilled voids, it was found that the bonding efficiency of the void after forging process increases with an increase in deformation, and a decrease of initial diameter of voids.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.250-252
• /
• 2000

A simple analysis method for inverter-fed induction motor using F.E.M and equivalent circuit is proposed. And an optimum shape of rotor slot for 2Hp inverter-fed induction motor is determined by combining the proposed analysis method and an optimization algorithm. Conjugate gradient method is used for the optimization algorithm. The optimization is performed for higher efficiency and reduction of harmonic loss in the inverter-fed induction motor. The optimization results are verified by comparing with those of the time-step F.E.A and the experiment.

• Journal of Nutrition and Health
• /
• v.9 no.2
• /
• pp.24-39
• /
• 1976

The present study was undertaken to investigate the metabolic problems of high carbohydrate and cellulose diets of Korean. Forty males and same number of females of Albino rats, aged $45{\pm}5$days were divided into 95% high carbohydrate (H. CHO)group, 83.8% medium carbohydrate (M. CHO)group, 50% low carbohydrate (L. CHO) group and standard (Stand). group containing 72.2% sugar. Each group was divided into two again-1.55% cellulose group and non-cellulose group, 10 rats each of eight groups in both sexes. Cellulose was added to each of non-cellulose diets in the forms of spinach powder and rice bran. After 14 weeks the rats were sacrificed for chemical analysis and the results were elucidated as follows. (1) H. CHO+Cell. group showed the lowest value in body weight gained and shrinkage of almost all organs, in contrast with this group the L.CHO group showed higher body weight gained than Stand. group. M. CHO+Cell, group showed much the same body weight gained curve as Stand. group. (2) It was observed that cellulose group showed lower F.E.R and P.E.R value than non-cellulose group comparatively. (3) Total nitrogen retention and retention rate were decreaced in H. CHP groups compared with M. CHO or L. CHO groups. (4) The amount of feces was increased due to addition of cellulose to experimental diets and in accordance with the increasing total fecal excretion of nitrogen and glucose was also increased, especially noticeable in fecal glucose excretion. (5) It was noteworthy that serum cholesterol level was decreased due to addition of cellulose in H. CHO group and L. CHO group. (6) M. CHO+Cell. group was designed to reflect the average survey data of Korean diets and there was no significant differences on body weight gained, F.E.R, P.E.R, total nitrogen retention and hematology between M. CHO+Cell. and Stand. group. Total glucose excretion was increased due to dietary cellulose in M. CHO+Cell. group, but it seemed to be no metabolic problems in this group.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2111-2116
• /
• 2004

This paper shows how to improve the efficiency and output and to reduce NOx emission of Seoinchon GE 7F gas turbine, Korea Western Power Co. by replacing the existing 7F gas turbine with new 7FA+e gas turbine because the performance of 7F gas turbine was degraded due to long term operation. In this paper, we will study gas turbine development trend and O&M technology. Finally, we will review for uprate of Seoinchon 7F gas turbine to help someone to improve their units in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1133-1134
• /
• 2013

• Proceedings of the KIEE Conference
• /
• 1983.07a
• /
• pp.59-60
• /
• 1983