• Title/Summary/Keyword: F-V특성

Search Result 837, Processing Time 0.036 seconds

Motor Vibration Suppression during V/F Operation at Light-Load (V/F 운전시 전동기 경부하 진동 개선)

  • Hong, Sung-Min;Jung, Se-Jong
    • Proceedings of the KIPE Conference
    • /
    • 2014.07a
    • /
    • pp.375-376
    • /
    • 2014
  • 본 논문은 전동기의 V/F 운전시 발생하는 경부하 진동을 억제하는 방법을 제안한다. 제안한 방법은 기존의 무부하 전류를 사용하는 방법을 변형하여 V/F 운전시 전원 및 기계적 진동에 의해 발생하는 경부하 진동을 억제하여 운전 특성을 향상시킨다. 제안한 방법을 적용한 V/F 운전 특성을 실험을 통하여 검증하고 기존의 V/F 운전 대비 개선된 성능을 비교 분석한다.

  • PDF

Electrical and Structural Properties of $CaF_2$ Film for TFT Applications (TFT응용을 위한 $CaF_2$ 박막의 전기적, 구조적 특성)

  • Kim, Do-Young;Choi, Suk-Won;Yi, Jun-Sin
    • Proceedings of the KIEE Conference
    • /
    • 1998.07d
    • /
    • pp.1355-1357
    • /
    • 1998
  • TFT의 게이트 절연막으로 사용되는 절연체는 우수한 절연특성과 낮은 계면포획전하밀도($D_{it}$)를 요구한다. 이에 본 연구에서는 우수한 절연특성을 가지며, 격자상수가 Si과 유사한 $CaF_2$의 증착 특성을 연구하였다. 진공증착법을 이용하여 p형 Si(100) 기판위에 $CaF_2$의 기판온도, 두께를 변화시켜 전기적, 구조적 특성을 평가하였다. 또한 Si 기판에 방향에 따른 박막의 특성을 조사하였다. 구조적 특성분석으로부터 Si(100) 기판의 경우 $CaF_2$는 (200)방향으로 주도적인 성장을 하였으며 기판온도를 상승시킴에 따라 (220)방향으로도 성장을 하는 것으로 나타났다. 열처리 전후의 구조적 특성은 SEM을 통해서 확인 할 수 있었다. 열처리 전후의 특성 변화로부터 저온($100^{\circ}C$이하)에서는 기판과의 성장방향과 동일하였으며 고온($200^{\circ}C$이상)에서는 기판방향과는 다른 방향 성장 결과를 얻었다. 전기적 특성평가를 위하여 C-V 특성을 평가하였다. C-V 특성으로부터 Si(100) 기판의 온도가 $100^{\circ}C$, $1455\AA$ 두께로 증착한$CaF_2$ 박막의 $D_{it}$$1.8{\times}10^{11}cm^{-1}eV^{-1}$로 낮은 값을 가지 고 있었으며 0.1MV/cm에서 누설전류밀도가 $10^{-8}A/cm^2$ 이었다.

  • PDF

Development and Luminescent Characteristics of $CaSiN_2$ Based Phosphors ($CaSiN_2$를 모체로 하는 형광체의 개발 및 발광 특성)

  • Lee, Soon-Seok;Lim, Sung-Kyoo
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.10
    • /
    • pp.31-36
    • /
    • 1999
  • The $CaSiN_2:Eu$ and $CaSiN_2:Tb$ phosphors were synthesized and analyzed to develop new nitride compound phosphors. $Ca_3N_2$, $Si_3N_4$ and $EuF_3$(or $TbF_3$) powders were mixed, cold-pressed, and sintered to synthesize $CaSiN_2:Eu$ and $CaSiN_2:Tb$ phosphors. Photoluminescence(PL) and electroluminescence(EL) characteristics of the synthesized phosphors were measured and found to be similar to general emission spectra of 뗘 and Tb ion, respecticely. Threshold voltage($V_{th)$) and luminance of the $CaSiN_2:Eu$ TFEL device fabricated by sputtering were 90 V and 1.62 $cd/m^2$ at 280 V, respectively. The charge-voltage(Q-V) and transferred charge-phosphor field($Q_t-F_p$) characteristics of the TFEL devices were also measured.

  • PDF

Minimum Copper Losses Control for V/f Operation of Induction Motors (유도 전동기의 V/f 운전 시 최소 동손 제어 기법)

  • Kim, Won-Jae;Kim, Sang-Hoon
    • Proceedings of the KIPE Conference
    • /
    • 2018.07a
    • /
    • pp.414-415
    • /
    • 2018
  • 본 논문에서는 유도 전동기의 V/f 운전 시 동손을 최소로 하는 제어 방법을 제안한다. 제안된 방법은 V/f 운전 시 부하에 따라 최소 동손 제어가 가능하도록 고정자 전압 크기를 가변하여 부하 변동에 따른 동특성 향상과 효율적인 구동이 가능하게 하였다. 5HP 유도 전동기 구동시스템에 대한 시뮬레이션을 통해 제안된 기법의 효용성을 검증하였다.

  • PDF

A Development of 2.56 MeV e-Beam Accelerator for Excitation of XeF(C\rightarrow$A) Laser (XeF(C\rightarrow$A) 레이저 여기용 2.5MeV e-Beam 가속기 개발)

  • 류한용
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 1991.06a
    • /
    • pp.18-21
    • /
    • 1991
  • 청록색 영역에서 발진하는 XeF(C$\longrightarrow$A)엑사이머 레이저 여기용 2.56MeV 전자빔 가속기를 개발하였다. 대출력 전자빔 가속기는 $\pm$80kV로 충전하는 Marx Generator를 동축구조로 꾸밈으로서 낮은 임퍼던스와 인덕턴스를 유지할 수 있었고, 빠른 전압상승과 유사구형파 출력을 얻을 수 있었다. 본 연구에서는 대출력 전자빔가속기 (2.56 MeV, 2.2KJ)의 파라메터와 동작특성, 전압측정 등을 기술한다.

  • PDF

Numerical Analysis of Thermal and Flow affected by the variation of rib interval and Pressure drop Characteristics (리브 간격 변화에 따른 열.유동 수치해석 및 압력 저하 특성)

  • Chung, Han-Shik;Lee, Gyeong-Wan;Shin, Yong-Han;Choi, Soon-Ho;Jeong, Hyo-Min
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.5
    • /
    • pp.616-624
    • /
    • 2011
  • The flow characteristics and heat transfer augment on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow has been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio were 0.07 and rib height to channel height ratio was set as e/H=0.117 for various PR(rib pitch-to-rib height rate) between 8~14, respectively. The SST k-${\omega}$ turbulence model and v2-f turbulence model were used to find out the heat transfer and the flow characteristics of near the wall which are suited to obtain realistic phenomena. The numerical analysis results show turbulent flow characteristics, heat transfer enhancement and friction factor as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow. and v2-f turbulence model simulation results have a good agreement with experimental values.

A study on a Front Measurement System from the Traveling Vehicle Using V.F. Model (V.F. 모델을 이용한 주행차량의 전방 계측시스템에 관한 연구)

  • Jung, Yong-Bae;Jung, Sung-Wook;Zhang, Woo-Chol;Kim, Tae-Hyo
    • Proceedings of the Korea Institute of Convergence Signal Processing
    • /
    • 2006.06a
    • /
    • pp.5-8
    • /
    • 2006
  • 본 논문에서는 3차원 좌표를 얻을 수 있는 카메라 Calibration 알고리듬을 확립하고, View Frustum(V.F.) 모델을 이용하여 도로의 영상을 모델화하였다. 그리고 주행하는 차선 내에 존재하는 선행차량의 위치측정 및 차량까지의 거리를 정확히 인식하기 위해 피칭오차를 보정하며 실시간으로 계측하는 알고리듬을 제안하였다. 기존의 많은 추돌 경보시스템(CWS)들은 도로가 평면이라 가정하여 도로와 차량사이의 기하적인 변화에 따른 오차 특성을 고려하지 않았다. 이를 보완하고자 본 논문에서는 카메라 Calibration 알고리듬을 적용하여 실세계 좌표계와 영상좌표계 사이의 기하해석으로 사영행렬을 추출하였고, V.F. 모델을 이용하여 소실점의 기하적인 해석을 통하여 차량의 피칭변화에 따른 오차특성을 실시간으로 보정하였다. 실험결과 거리의 오차를 2%이하로 줄일 수 있어 피칭변화에 강인함을 확인할 수 있었다.

  • PDF

A Study on the Characteristics Analysis and Design of High Sensitivity Silicon Photodiode for Laser Detector (레이저 검출용 고감도 실리콘 포토다이오드 제조 및 특성 분석에 관한 연구)

  • Lee, Jun-Myung;Kang, Eun-Young;Park, Keon-Jun;Kim, Yong-Kab
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.5
    • /
    • pp.555-560
    • /
    • 2014
  • In order to improve spectrum sensitivity of photodiode for detection of the laser wavelength at 850 nm ~ 1000 nm of near-infrared band, this study has produced silicon-based photodiode whose area is $5000{\mu}m{\times}2000{\mu}m$, and the thickness is $280{\mu}m$. It was packed by the TO-5 type. The electrical properties of the dark currents have valued of approximately 0.1 nA for 5 V reverse bias, while the capacitance showed 32.5 pF at frequency range of 1 kHz and about 32.4 pF at the range of 200 kHz for 0 V. In addition, the rising time of output signal was as fast response as 20.92 ns for 10V. For the optical properties, the best spectrum sensitivity was 0.57 A/W for 890 nm, while it was relatively excellent value of 0.37 A/W for 1,000 nm. Over all, there were good spectrum sensitivity for this diode over the range of 870 ~ 920 nm.

An Experimental Study on the Mechanical Properties and Long-Term Deformations of High-Strength Steel Fiber Reinforced Concrete (고강도 강섬유보강 콘크리트의 역학적 특성 및 장기변형 특성에 관한 실험적 연구)

  • Yoon, Eui-Sik;Park, Seung-Bum
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.2A
    • /
    • pp.401-409
    • /
    • 2006
  • This study presents basic information on the mechanical properties and long-term deformations of high-strength steel fiber reinforced concrete(HSFRC). The Influence of steel fiber on modulus of elasticity, compressive, splitting tensile and flexural strength, and drying shrinkage and creep of HSFRC are investigated, and flexural fracture toughness is evaluated. Test results show that Test results show that the effect of steel fibers on the compressive strength is negligible, and the modulus of elasticity of HSFRC increased with the increase of fiber volume fraction. And the effect of fiber volume fraction($V_f$) and aspect ratio($l_f/d_f$) on tensile strength, flexural strength and toughness is extremely prominent. It is observed that the flexural deflection corresponded to ultimate load increased with the increase of $V_f$ and $l_f/d_f$, and due to fiber arresting cracking, the shape of the descending branch of load-deflection tends towards gently. Also, the effect of addition of various amounts of fiber on the creep and shrinkage is obvious. Especially, the effect of adding fibers to high-strength concrete is more pronounced in reducing the drying shrinkage than the creep.