• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.157-162
• /
• 1997

소결온도 및 열처리에 의하여 미세조직을 변화시킨 질화규소의 파괴강도특성 및 그 신뢰성 평가를 하였다. 결정립이 클수록 파괴인성치는 증가하였지만 굽힘강도는 저하하였다. 균열재의 파괴응력 $\sigma$c와 등가균열길이 ae와의 관계는 프로세스 존 크기 파기기준에 의한 계산 결과와 매우 잘 일치하였다. 그리고 굽힘파괴응력 $\sigma$F와 파괴인성치 KIC의 통계적 특성을 고려한 파괴평가고건을 제안하였다.

• 대한수학회지
• /
• 제56권6호
• /
• pp.1463-1474
• /
• 2019

Let C be a nonsingular projective curve of genus ${\geq}2$ over an algebraically closed field of characteristic 0. For a point P in C, the Weierstrass semigroup H(P) is defined as the set of non-negative integers n for which there exists a rational function f on C such that the order of the pole of f at P is equal to n, and f is regular away from P. A point P in C is referred to as a weak Galois-Weierstrass point if P is a Weierstrass point and there exists a Galois morphism ${\varphi}:C{\rightarrow}{\mathbb{p}}^1$ such that P is a total ramification point of ${\varphi}$. In this paper, we investigate the number of weak Galois-Weierstrass points of which the Weierstrass semigroups are generated by two positive integers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.390-400
• /
• 2010

BNWF(Beam on Nonlinear Winkler Foundation) method has long been adopted for lateral behavior analysis of pile foundation and widely recognized for its simplicity and accuracy up until now. However, due to lateral load tests which were done in limited conditions and theory-based input Parameter estimation, the applicbility of p-y curve has not been fully examined. Accordingly, we researched on the applicability of conventional input parameter estimation and the p-y curve to be determined by the estimation through inverse analysis based on lateral load tests.

• 산업기술연구
• /
• 제9권
• /
• pp.21-28
• /
• 1989

For the study of the fatigue behavior, high-strength bolted connections on a small scale were manufactured, and carried on fatigue tests. Its experimental values were analysed by stress-fatigue life (S-N) curve. Three types of specimens : the base metal, the cireular hole and the welded sperimens had same net section were made. Through the same tests those experimental values were compared with those of the high-strength bolted conneetions. The results of these studies are as followings. It was found that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the high-strength bolted conneetions were much more about 14% and 16% than that of the base metal specimen. It was thought that this trend was due to frictional force increasing fatigue strength. It was known that fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the welded joints were less 29% and 21% than that of base metal specimen. It was thought that that trend was due to weld flaw. It was appeared that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the high-strength bolted connections were much more about 38% and 30% than that of welded joint. It was thought that it was due to both frictional force increasing the fatigue strength in bolted connections and weld flaw decreasing the fatigue strength in welded connections. It was found that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the B3 specimens were much more 2% and -2% than that of the B4 specimen. It was thought that that trend was due to the frictional force, which concerned with shape of specimen. It was known that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the specimen with circular hole was less 61% and 65% than that of base metal. It was known that the allowable stress for bolted joint was higher than that of welded Joints. If that research is continued and more data are accumulated it can be expected that a basic pattern to provided the indicator of the fatigue design of the bolted connections of steel structures and persume the safety and lifeproof of existing structures is given.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.3-7
• /
• 1998

The rare-earth ions (R3+, R=Nd, Er) doped CaF2 layers have been grown on CaF2(111) substrate by molecular beam epitaxy. The epitaxial relationship and the crystallinity of CaF2:R3+ layers depending on the concentration of R3+ were studied by reflection high-energy electron diffraction (RHEED). In aspect of application as buffer layer in semiconductor-related hybrid structure, the lattice displacement between CaF2:R3+ layers and CaF2(111) substrate was investigated by X-ray rocking curve analysis.

• 대한수학회지
• /
• 제45권5호
• /
• pp.1443-1482
• /
• 2008

In this paper we define a Myller configuration in a Finsler space and use some special configurations to obtain results about Finsler subspaces. Let $F^{n}$ = (M,F) be a Finsler space, with M a real, differentiable manifold of dimension n. Using the pull back bundle $({\pi}^{*}TM,\tilde{\pi},\widetilde{TM})$ of the tangent bundle $(TM,{\pi},M)$ by the mapping $\tilde{\pi}={\pi}/TM$ and the Cartan Finsler connection of a Finsler space, we obtain an orthonormal frame of sections of ${\pi}^{*}TM$ along a regular curve in $\widetilde{TM}$ and a system of invariants, geometrically associated to the Myller configuration. The fundamental equations are written in a very simple form and we prove a fundamental theorem. Important lines in a Finsler subspace are defined like special lines in a Myller configuration, geometrically associated to the subspace: auto parallels, lines of curvature, asymptotes. Torse forming vector fields with respect to the Cartan Finsler connection are characterized by means of the invariants of the Frenet frame of a versor field along a curve, and the new notion of torse forming vector fields in the sense of Myller is introduced. The particular cases of concurrence and parallelism in the sense of Myller are completely studied, for vector fields from the distribution $T^m$ of the Myller configuration and also from the normal distribution $T^p$.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.551-564
• /
• 2021

The use of clean energy based on the hydrogen economy is increasing rapidly due to the greenhouse gas reduction policies and the increase in the need for hydrogen. Currently, South Korea government have been considering a plan to construct hydrogen refueling stations at expressway service area for the purpose of supplying hydrogen vehicles. In the case of a hydrogen refueling stations, a quantitative risk assessment (QRA) must be performed because it includs and uses a high pressurized hydrogen storage tank. In this study, QRA was conducted using societal risk and F-N curve by the consequence assessment (CA) of jet fire and explosion according to the population density, capacity of the high pressurized hydrogen storage tank and frequency assessment (FA) data to the general hydrogen refueling stations systems in expressway service area. In the cases of jet with a leak diameter of 7.16 mm, regardless of expressway service area location, the societal risk was over 1E-04 that was acceptable for as Low As reasonably practicable (ALARP) region (workforce), but unacceptable for ALARP region (public). In the cases of gas explosion, all expressway service area satisfy ALARP region. In the case of the population density is over 0.0727, QRA for constructing the hydrogen refueling stations, must be conducted.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.467-471
• /
• 1998

A mathematical model is developed to predict the fatigue notch factor of butt welds subject to number of parameters such as weld geometry, residual stresses under dynamic combined loading conditions (tensile and bending). Linear elastic fracture mechanics, finite element analysis, dimensional analysis and superposition approaches are used for the modelling. The predicted results are in good agreement with the available experimental data. As a result, scatters of the fatigue data can be significantly reduced by plotting S-N curve as ($S{\cdot}K_f$) vs. N.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.213-219
• /
• 2018

The degradation mechanism and physical properties of an FKM O-ring were observed with thermal aging in this experiment. From X-ray photoelectron spectroscopy (XPS) analysis, we could observe carbon (285 eV), fluoro (688 eV), and oxygen (531 eV) peaks. Before thermal aging, the concentration of fluoro atoms was 51.23%, which decreased to 8.29% after thermal aging. The concentration of oxygen atoms increased from 3.16% to 20.39%. Under thermal aging, the FKM O-ring exhibited debonding of the fluoro-bond by oxidation. Analysis of the C1s, O1s, and F1s peaks revealed that the degradation reaction usually occurred at the C-F, C-F2, and C-F3 bonds, and generated a carboxyl group (-COOH) by oxidation. Due to the debonding reaction and decreasing mobility, the glass transition temperature of the FKM O-ring increased from $-15.91^{\circ}C$ to $-13.79^{\circ}C$. From the intermittent CSR test, the initial sealing force was 2,149.6 N, which decreased to 1,156.2 N after thermal aging. Thus, under thermal aging, the sealing force decreased to 46.2%, compared with its initial state. This phenomenon was caused by the debonding reaction and decreasing mobility of the FKM O-ring. The S-S curve exhibited a 50% increase in modulus, with break at a low strain and stress state. This was also attributed to the decreasing mobility due to thermal aging degradation.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권1호
• /
• pp.50-61
• /
• 2000

최근 원추곡선에 기반한 스테레오 비젼에 대한 연구가 주목을 받고 있는데, 이는 원추곡선이 행렬표현, 대응관계설정의 용이성, 그리고 실세계에서 쉽게 찾을 수 있다는 좋은 성질을 갖는다는 점에서 당연한 현상이라 여겨진다. 하지만, 일반적인 고차의 대수곡선에 대한 확장은 아직 성공적으로 이루어지지 못하고 있는 실정이다. 기약인 대수곡선 (irreducible algebraic curve)은 실세계에서 많지 않지만, 직선과 원추곡선은 무수히 많고, 따라서 이들의 곱으로 주어지는 높은 차수의 대수곡선도 무수히 많다. 본고에서는 2이상의 임의의 차수를 가지는 대수곡선을 calibration된 두 대의 카메라를 가지고 스테레오 문제를 푼다. 대응관계설정과 복원, 두 가지 문제 모두에 대한 closed form solution을 제시한다. $f_1,\;f_2,\;{\pi}$를 각각 두 이미지 곡선, 공간상의 평면이라 하고, $VC_P(g)$를 평면곡선 g와 점 P로 만들어지는 원추곡선이라 하면, $VC_{O1}(f_1)\;=\;VC_{O1}(VC_{O2}(f_2)\;∩\;{\pi})$ 의 관계를 이용하여 미지수인 평면 ${\pi}$의 계수들, $d_1,\;d_2,\;d_3$에 대한 다항 방정식들을 얻을 수 있다. 약간의 변형을 통하여 $d_1$에 대한 다항 방정식을 얻을 수 있고, 이 방정식의 유일한 양수해는 나머지 과정에서 매우 중요한 역할을 한다. 그 이후에는 $O(n^2)$개의 일변수 다항식에 대한 계산만으로 모든 스테레오 문제를 해결한다. 이는 과거의 여러 개의 다변수 다항식의 공통근을 구해야 했던 방법에 비교된다. synthetic 데이터와 실제 이미지에 대한 실험은 우리의 알고리듬이 옳음을 보여준다.