• Journal of the Korean Society of Food Culture
• /
• v.37 no.4
• /
• pp.376-384
• /
• 2022

This study was performed to develop a K_diet-index based on the definitions and characteristics of traditional Korean food. The Korean Food Pattern Index (K_diet-index) for diseases was applied using dietary data from the 2017 National Health and Nutrition Examination Survey (KNHANES) and the association between K_diet-index and metabolic disease was confirmed. The study subjects were 1,971 Korean adults aged >40, and the components were classified according to 14 criteria used to establish the K_diet-index. Main ingredients up to the top 3 were designated using dish names, ingredients, and contents using KNHANES dietary data. K_diet-index was classified using scores of ≤3 points, 4-7 points, and ≥8 points and total K_diet-index were calculated by summing dietary scores. Correlations between K_diet-index and obesity, hypertension, hyperlipidemia, and diabetes were analyzed. The odds ratio (OR) and 95% confidence interval (CI) for obesity were 0.531, 0.385~0.732 and for elevated cholesterol (≥240 mg/dL) indices were 0.471, 0.282~0.788, respectively, which showed a significant decreased in the risk for each disease for K_diet-index of ≥8 points. This study confirms that metabolically related clinical results improved significantly as K_diet-index increased and that higher Korean food pattern indices are associated with lower risks of metabolic disease

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.339-339
• /
• 2002

In the RABiTS approach to coated conductor development, successful (both economic and technological) depends on the refinement and optimization of each of three important components: the metal tape substrate, the buffer layer(s), and the HTS layer. Here we will report on the ORNL approach and progress in each of these areas. - Most applications will require metal tapes with low magnetic hysteresis, mechanical strength, and excellent crystalline texture. Some of these requirements are competing. We report on progress in obtaining a good combination of these characteristics on metal alloys of Ni-Cr and Ni-W. - The deposition of appropriate buffer layers is a crucial step. Recently, base research has shown that the presence of a stable sulfur superstructure present on the metal surface is needed for the nucleation and epitaxial growth of vapor-deposited seed buffer layers such as YSZ, CeO$_2$ and SrTiO$_3$. We report on the details and control of this superstructure for nickel tapes, as well as recent results for Cu and Ni-13%Cr. - Processes for deposition of the HTS coating must economically provide large values of the figure-of-merit for conductors, current x length. At ORNL, we have devoted efforts to a precursor/post-annealing approach to YBCO coatings, for which the deposition and reaction steps are separate. We describe motivation for and progress toward developing this approach. - Finally, we address some issues for the implementation of coated conductors in real applications, including the need for texture control and electrical stabilization of the HTS coating.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.481-491
• /
• 2024

Objective: This study determined fermentation characteristics of commonly used feedstuffs, especially tropical roughages, for dairy cattle in Southeast Asia. This information is considered relevant in the context of the observed low milk fat content and milk production in Southeast Asia countries. Methods: A total of 29 feedstuffs commonly used for dairy cattle in Vietnam and Thailand were chemically analysed and subjected to an in vitro gas production (GP) test. For 72 h, GP was continuously recorded with fully automated equipment and methane (CH₄) was measured at 0, 3, 6, 9, 12, 24, 30, 36, 48, 60, and 72 h of incubation. A triphasic, nonlinear, regression procedure was applied to analyse GP profiles while a monophasic model was used to obtain kinetics related to CH₄ production. Results: King grass and VA06 showed a high asymptotic GP related to the soluble- and non-soluble fractions (i.e. A1 and A2, respectively) and had the highest acetate to propionate ratio in the incubation fluid. The proportion of CH₄ produced (% of GP at 72 h) was found to be not different (p>0.05) between the various grasses. Among the selected preserved roughages (n = 6) and whole crops (n = 4), sorghum was found to produce the greatest amount of gas in combination with a relatively low CH₄ production. Conclusion: Grasses belonging to the genus Pennisetum, and whole crop sorghum can be considered as suitable ingredients to formulate dairy rations to enhance milk fat content in Vietnam/Thailand.

• Membrane and Water Treatment
• /
• v.14 no.4
• /
• pp.163-173
• /
• 2023

The presence of high amounts of organic and inorganic contaminants in textile wastewater is a major environmental concern. Therefore, the treatment of textile wastewater is an urgent issue to save the aquatic environment. The disposal of large quantities of untreated textile wastewater into inland water bodies can cause serious water pollution. In this study, synthetic dye wastewater samples were prepared using orange dye in the laboratory. The synthetic samples were then treated by a batch adsorption process using the prepared activated carbon (AC) from date pits. The wastewater parameters studied were the pH, total dissolved solids (TDS), total suspended solids (TSS), electrical conductivity (EC) and salinity. The activated adsorption process showed that the maximum removal efficiencies of electric conductivity (EC), salinity, TDS and TSS were 65%, 92%, 89% and 90%, respectively. The removal efficiencies were proportional to the increase in contact time (30-120 min) and AC adsorbent dose (1, 3 and 5 g/L). The adsorption profile indicates that 5 g/L of adsorbent delivers better results for TDS, EC, TSS and salinity at contact time of 120 min. The adsorption characteristics are better suited to the pseudo-second-order kinetic model than to the pseudo-first-order kinetic model. The Langmuir and Freundlich isotherms were well suited for describing the adsorption or contact behavior of EC and TSS within the studied system.

• Membrane and Water Treatment
• /
• v.15 no.2
• /
• pp.79-88
• /
• 2024

Modification of Polyvinylidene fluoride (PVDF) hollow fiber membranes (HFMs) characteristics and performance were investigated via post treatment using different oxidants. sodium hypochlorite (NaOCl), hydrogen peroxide (H₂O₂) and potassium persulfate (KPS). Fourier transform infrared (FTIR) and Proton nuclear magnetic resonance (¹H-NMR) results revealed no structural differences after post treatment. Cross-sectional micrographs show finger-like structures at the outer and inner walls of the HFMs and sponge-like structures in middle, where NaOCl and KPS post treated fibers exhibited a decrease in finger-like structures in addition to aggregates appearing on the surface, consequently leading to an increase in the surface roughness (Ra) from 48 nm to 52.8nm and 56 nm, respectively. Hydrogen peroxide post treatment only was observed to decrease the water contact angle from 98° to 81.4°. It was also observed that the elongation at break and the modulus deceased after NaOCl post treatment from 34.5 to 28.5% and from 19.3 Mpa to 16.6 Mpa, respectively. Moreover, pure water flux after H₂O₂ post treatment increased from 87.8 LMH/bar to 113 LMH/bar at 0.45 bar, while no changes were detected for the methylene blue dye rejection (74%) between raw and hydrogen peroxide post treated fibers at the same pressure. According to the findings hydrogen peroxide post treated PVDF HFMs have the most uniform surfaces, with almost no alterations in structural and mechanical properties or porosities with enhanced hydrophilicity and pure water flux maintaining appropriate rejection. Therefore, it is considered an efficient surface modifying agent for UF/NF membranes or low-pressure separators.

• Journal of Korean Academy of Nursing Administration
• /
• v.1 no.2
• /
• pp.338-348
• /
• 1995

We need to continuously evaluate for nursing quality and the outcome to reflect nursing, to repair and improve of nursing. The first problem for nursing quality improvement is development of evaluation tool for the quality of nursing care. We need a system for quality assurance evaluation that is, development and framework of evaluation tool for nursing care quality. The purpose of this study was attempted to develop an evaluation tool for the quality of nursing care in musculoskeletal disorder patients. The approach method of nursing quality for the development of the tool in this study was process evaluation framework. The study were devided dvelopment process and reliability, validity verification process. The subjects of development process of this tool are three nursing export groups, and the subject of reliability, validity verification process are 20 samples of two university hospital in seoul, who were within discharge 3 months after admission treatment in musculo-skeletal disorder. Data for this study was collected from March 10 to April 13, 1995. The development process of the tool were as follows : 1. Make preliminary list of the tool by focal group were constituted 12 clinical nurses. 2. Modify and add preliminary list by 4 nursing expert panel. 3. Calculate content validity of the tool by 25 nursing expert panel of judge. 4. Verify reliability and validity of the tool. 5. Finalize an evaluation tool for the quality of the nursing care in musculo-skeletal disorder. The results of this study were as follows : 1) Development an evaluation tool for the quality of nursing care in musculo-skeletal disorder. (1) The evalution tool of this study was developed 5 standards, 33 criterias and 133 indicators. (2) 5 standards were divided according to Nursing Process. from standard 1 to standard 5, involved criterias were each 6(18%), 3(9%), 3(9%), 15(46%), 6(18%). 2) Verify reliability and validity of the tool. (1) Score of adequate degree for content validity of 33 criterias and 133 indicators were every average 2.82. (2) Inter-rater reliabilities(consentaneity score) of the tool by pearson correlation coefficient between three raters were : r=.7506, r=.8934, r=.6695. and Inter-rater reliabilities by single-facet crossed design were : r=.7464. (3) The alpha coefficient relating to internal consistency was .8524 over all 30 items of 33 criterias of developed tool. (4) Score of the quality of nursing care following to generaal characteristics of this study subjects were stastically significant differences according to educational level (F=2.93, p=.029)and diagnosing classification (F=2.50, p=.042). Through this study, I'm sure that the developed tool for the quality of patient care in musculo-skeletal disorder will show the way of more improvement of the quality of nursing care and effective nursing interventions.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.166-176
• /
• 2011

Bacillus thuringiensis CAB530 was isolated from dead Anomata albopilosa (Rutelidae: Coleoptera) and soil of green tea field, and confirmed its insecticidal activities. CAB530 isolate showed a high insecticidal activity against the beet armyworm among the many lepidopteran insects that are difficult to control. $LC_{50}$ value of CAB530 isolate against the second larva of Spodoptera exigua was $1.49{times}10^4$ spore concentration (cfu/$m{\ell}$). SDS-PAGE result of insecticidal toxin protein of CAB530 isolate showed a band at 130 kDa that is similar pattern with B. thuringiensis subsp. kurstaki that took insecticidal activity against S. exigua. Otherwise, the crystal protein of the CAB530 isolate was conformed at 65 kDa level after 30 minute of incubation in S. exigua midgut juice. Six crystal genes (cry1Aa, cry1Ab, cry1C, cry1D, cry1F and cry1I) were identified by PCR. It different from genes of B. thuringiensis subsp. kurstaki. Crystal shape and pattern of toxin protein was similar with B. thuringiensis subsp. kurstaki, however, insecticidal activity and PCR result of CAB530 isolate was similar with B. thuringiensis subsp. aizawai.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.30-37
• /
• 1989

The PIN type a-SiC:H/a-Si:H heterojunction solar cells were fabricated by using the rf glow discharge decomposition of $SiH_4$ mixed with $CH_4,B_2,H_6\;and\;PH_3.$ The efficiency of the solar cell of the $SnO_2/ITO$ was higher than that of ITO transparent oxide layer by 1.5%. The P layer was prepared with the thickness of $100{\AA}$ and $CH_4/SiH_4$ ration of 5. The I layer has been deposited on the P layer and it is not pure intrinsic but near N type. So $SiH_4$ mixed with $B_2H_6$ of 0.3ppm was used to change this N type nature to intrinsic having the thickness of 5000${\AA}$. And consecutively, the N layer was deposited with t ethickness of $400{\AA}$ using $SiH_4/PH_3$ mixtures. The solar cell demonstrated 0.94V of $V_{oc'}$ 14.6mA/cm of $J_{sc}$ and 58.2% of FF, resulting the efficiency of 8.0%. To minimize loss by the reflection of light, $MgF_2$ layer was coated on the lgass and the efficiency was improved by 0.5%. Therefore, the solar cell indicated overall efficiency of 8.5%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.806-811
• /
• 2003

Effects of pH, temperature, light, sugars, organic acids, metal ions, ascorbic acid, thiamine nicotinic acid and pyridoxine on the stability of the color of the cranberry solution were investigated. The pH had marked influences on the color of the cranberry solution: i.e., the color of the cranberry solution was more intense at low pH. It showed characteristic bathochromic shift as the pH of the solution increased. The half-lives of olor value were 34 days at 37$^{\circ}C$, 91 mins at 9$0^{\circ}C$ and 29 mins at 12$0^{\circ}C$. Light gave an adverse effect to the stability of the color. The color degradation can be minimized by shielding the light from the cranberry solution. Among the sugars tested, fructose was the most deleterious followed by sucrose, galactose, maltose and glucose. Fumaric acid was found to be the most effective in stabilizing the color followed by citric acid, malic acid, acetic acid, while tartaric acid was found to be deleterious. Among the metal ions tested N $a^{+}$ and $Mg^{2+}$ were found to be effective in stabilizing the color, while M $n^{2+}$ was found to be the most deleterious followed by F $e^{2+}$, $K^{+}$ and $Ca^{2+}$. Ascorbic acid was found to be deleterious considerably followed by thiamine, while nicotinic acid and pyridoxine were found to be effective in stabilizing the color feebly.or feebly.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.373-380
• /
• 2002

Humic and fulvic acids present in soil of different depth were extracted and their characteristics were analyzed as a basic study to evaluate the effect of humic substances on the behaviour of radioactive elements deposited on soil. Molecular size distribution of the humic and fulvic acids was measured by stirred cell ultrafiltration technique and the structural informations were obtained from their UV-Vis., IR and synchronous fluorescence (SyF) spectral analysis. Main molecular size ranges of the soil 1) humic and fulvic acids were 30~100 kDa (46~56%) and 10~30 kDa (33~43%) respectively, and their overall molecular sizes were found to became smaller with increasing the soil depth. Absorptivities measured at 280 nm in the UV-Visible spectra of humic acids were 1.4~1.5 times higher than those of fulvic acids, and increased with increasing the soil depth. SyF spectral data showed two distinct peak components having maximum peak positions of 428 nm (type I) and 498 nm (type II) for the soil humic and fulvic acids. From the analysis of the peak components, it was found that humic molecules are mainly made up of aromatic compounds corresponding to longer wavelength (type II), and the molecular components increased with increasing the soil depth. Analysis of IR spectral data indicated that the humic molecules contain a higher relative concentration of carboxylic groups than those of fulvic molecules, and the carboxylic group contents are seen to increase as the soil depth increase.