• 제목/요약/키워드: F&B distribution

검색결과 319건 처리시간 0.027초

아크 용융로에서 방사성 알루미늄 폐기물의 용융특성 (Melting Characteristics for Radioactive Aluminum Wastes in Electric Arc Furnace)

  • 민병연;송평섭;안준형;최왕규;정종헌;오원진;강용
    • 방사성폐기물학회지
    • /
    • 제4권1호
    • /
    • pp.33-40
    • /
    • 2006
  • 한국원자력연구소 내의 연구용 원자로(TRIGA II, III) 해체 시 발생한 방사성 알루미늄 해체 폐기물의 감용 및 제염 특성을 평가하기 위해 아크로에서 알루미늄의 용융 특성 및 방사성 핵종의 분배 특성에 대한 연구를 수행하였다. 알루미늄 폐기물은 흑연전극(graphite electrode)을 이용한 전기아크로에서 4가지 종류의 플럭스$(A:NaCl-KCl-Na_3AlF_6,\;B:NaCl-NaF-KF,\;C:CaF_2,\;D:LiF-KCl-BaCl_2)$를 함께 첨가하여 용융시켰다. 또한 알루미늄의 용융 시 방사성 핵종의 분배 특성을 고찰하기 위해 알루미늄 시편에 방사성 모의 핵종인 코발트, 세슘, 스트론튬의 화합물을 오염시킨 후 혹연도가니에 넣어 알루미늄 용융실험을 수행하였다. 전기아크로에서 알루미늄의 용융실험을 수행한 결과 플럭스의 종류에 따라 다소 차이는 있으나 플럭스의 첨가에 의해 알루미늄 용융체의 유동성이 증가됨을 확인할 수 있었다. 아크 용융에 의해 생성된 슬래그의 발생량은 플럭스 A와 B를 첨가한 알루미늄 용융실험에 비해 플럭스 C와 D를 첨가한 실험에서 상대적으로 많은 양이 생성됨을 알 수 있었으며, 첨가된 플럭스의 양이 증가할수록 이에 비례하여 슬래그의 발생량이 증가함을 알 수 있었다. 슬래그(slag)의 XRD 분석을 통해 방사성 핵종이 주괴에서 슬래그 상으로 이동한 후 슬래그를 구성하고 있는 산화알루미늄과 결합하여 안정한 화합물로 슬래그 상에 포집됨을 알 수 있었다. 알루미늄 폐기물의 용융시 Co의 분배율은 플럭스를 첨가한 경우에 보다 높은 제염계수를 나타냈으며, 모든 플럭스에서 40% 이상의 제염 효과를 나타내었다. 반면에 휘발성 핵종인 Cs과 Sr은 주괴로부터 98% 이상이 제거되어 대부분이 슬래그상과 분진으로 이동되는 특성을 확인할 수 있었다.

  • PDF

활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널의 구조성능 및 거동 (Structural Performance and Behavior of Concrete Floating Container Terminal by Live Load Distributions)

  • 이두호;정연주;유영준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권1호
    • /
    • pp.72-80
    • /
    • 2015
  • 본 연구에서는 총 10가지 다양한 컨테이너 활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널 하부슬래브의 휨응력분포와 변위분포를 비교분석하였다. 또한, 대상구조물의 구조성능과 거동을 수치해석적으로 검토하였다. 활하중 분포에 따른 구조성능 검토결과 3가지 하중분포 (A, B, D-type)는 인장거동을 보이며, 그 외의 7가지 하중분포 (C, E, F, G, H, I, J-type)에서는 압축거동을 나타내었다. 특히, D, F-type에서는 과도한 압축응력이 발생하였으며, 부력 프리플랙션 제어를 통하여 압축응력을 저감할 수 있을 것으로 사료된다. 활하중 분포에 따른 구조거동 검토결과 B, E, F, I-type에 대한 부유구조체의 기울기가 메가플로트 기준을 초과하였으며, 이와 같은 하중분포는 컨테이너 적하 시에 회피해야 될 것으로 판단된다. 종합적으로, 부유식 컨테이너 터미널에 관련된 기준 및 연구가 많지 않은 현실을 감안할 때, 본 연구는 컨테이너 터미널의 구조성능 및 거동을 검토를 위한 초석이 될 것이며, 사용 가이드라인으로 활용이 가능할 것으로 판단된다.

V2-F 난류 모델의 터보기계 유동 해석 적용 (Application of the V2-F Turbulence Model for Flow Analysis of Turbomachinery)

  • 박재현;손동경;김창현;백제현
    • 대한기계학회논문집B
    • /
    • 제40권2호
    • /
    • pp.75-83
    • /
    • 2016
  • 터보기계 내부 유동장은 역압력구배, 고속 유동으로 인해 매우 복잡하며, 이를 해석하기 위해 보다 정교한 난류 모델이 요구된다. 유동 해석을 위해 대수모델, 2-방정식 와점도 모델 등이 널리 사용되고 있으나, 매우 복잡한 유동을 모사하는데 어려움이 있다. 본 연구에서는 복잡한 유동에서의 예측성능이 우수하다고 알려진 Durbin의 V2-F난류 모델을 자체 개발 코드인 T-Flow에 적용하였으며, 채널 및 압축기 캐스캐이드 유동 해석 결과를 이용하여 난류 모델을 검증하였다. 또한 저속 압축기 동익 해석을 통해 터보기계 내부 유동에서의 적용 가능성을 판단하였다. 그 결과, V2-F난류 모델은 1-방정식, 2방정식 난류 모델보다 우수한 블레이드 표면 압력 분포 예측성능을 보였다.

Development of Polymeric Nanopaclitaxel and Comparison with Free Paclitaxel for Effects on Cell Proliferation of MCF-7 and B16F0 Carcinoma Cells

  • Yadav, Deepak;Anwar, Mohammad Faiyaz;Garg, Veena;Kardam, Hemant;Beg, Mohd Nadeem;Suri, Suruchi;Gaur, Sikha;Asif, Mohd
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권5호
    • /
    • pp.2335-2340
    • /
    • 2014
  • Paclitaxel is hydrophobic in nature and is recognized as a highly toxic anticancer drug, showing adverse effects in normal body sites. In this study, we developed a polymeric nano drug carrier for safe delivery of the paclitaxel to the cancer that releases the drug in a sustained manner and reduces side effects. N-isopropylacrylamide/vinyl pyrrolidone (NIPAAm/VP) nanoparticles were synthesized by radical polymerization. Physicochemical characterization of the polymeric nanoparticles was conducted using dynamic light scattering, transmission electron microscopy, scanning electron microscopy and nuclear magnetic resonance, which confirmedpolymerization of formulated nanoparticles. Drug release was assessed using a spectrophotometer and cell viability assays were carried out on the MCF-7 breast cancer and B16F0 skin cancer cell lines. NIPAAm/VP nanoparticles demonstrated a size distribution in the 65-108 nm range and surface charge measured -15.4 mV. SEM showed the nanoparticles to be spherical in shape with a slow drug release of ~70% in PBS at $38^{\circ}C$ over 96 h. Drug loaded nanoparticles were associated with increased viability of MCF-7 and B16F0 cells in comparison to free paclitaxel. Nano loaded paclitaxel shows high therapeutic efficiency by sustained release action for the longer period of time, i increasing its efficacy and biocompatibility for human cancer therapy. Therefore, paclitaxel loaded (NIPAAm/VP) nanoparticles may provide opportunities to expand delivery of the drug for clinical selection.

染色物의 日光에 對한 堅牢性에 關한 硏究 (第1報) 直接染料로 染色된 纖維素 纖維內에 있어서의 染料의 存在狀態 (豫報) (Studies on the Light Fastness of Dyeings (Part 1) The State of Direct Dyes in Cellulose (preliminary report)

  • 하원식
    • 대한화학회지
    • /
    • 제6권2호
    • /
    • pp.104-107
    • /
    • 1962
  • It is thought that the adsorption isotherms in dyeing of cellulose by the direct cotton dyes are consisted of combined type of Langmuir and Freundlich as the opinion of Fujino, et al;$[D]_F=ab[D]_S/(1+b[D]_S)+k[D]_S$where a,b,k; constants, $[D]_F$; dye adsorption on the fiber, $[D]_S$; dye concentration in the bath. This means that the dyes adsorbed in cellulose present in the state of partly mono molecular and partly aggregate; the characteristic fading order curve will be expressed as the combined system of uniform particle size distribution and assumed that the slope of the theoretical models of Baxter, et al., and assumed that the slope of curve will be changed near the point of a, the saturation value of Langmuir isotherms in the above equation. Firstly, the theoretical fading rate curve was treated with small colour difference as the one step of experimental of above consideration.

  • PDF

흡기포트 형상에 따른 선회비 분포특성에 관한 실험적 연구 (An experimental study on the characteristics of the swirl ratio distribution with an intake port geometry)

  • 이지근;주봉철;노병준;강신재
    • 대한기계학회논문집B
    • /
    • 제21권6호
    • /
    • pp.725-734
    • /
    • 1997
  • The effect of helical intake port geometry on in-cylinder swirl flow characteristics was studied. Two helical intake ports were selected to change swirl ratio, mean flow coefficient with the variation of valve lifts, valve eccentricity ratios and axial distance. The measurements were made by using an impulse swirl meter. The port B modified to increase the swirl ratio( $R_{s}$) had the tendency of the increased non-dimensional rig swirl ( $N_{r}$) distribution in comparison with that of the port A. And the $N_{r}$ distribution was remarkably improved at low valve lifts. The modification of the geometry to increase the swirl ratio ( $R_{s}$) in helical intake port resulted in the decrease of the mean flow coefficient ( $C_{f(mean)}$) regardless of valve eccentricity ratio ( $N_{y}$). And also non-dimensional rig swirl ( $N_{r}$) in the high valve lift affected the calculation of swirl ratio considerably.onsiderably.

Introduction to Distribution and Ecology of Sterile Conks of Inonotus obliquus

  • Lee, Min-Woong;Hur, Hyeon;Chang, Kwang-Choon;Lee, Tae-Soo;Ka, Kang-Hyeon;Jankovsky, L.
    • Mycobiology
    • /
    • 제36권4호
    • /
    • pp.199-202
    • /
    • 2008
  • Inonotus obliquus is a fungus that causes white heart rot on several broad-leaved species. This fungus forms typical charcoal-black, sterile conks (chaga) or cinder conks on infected stems of the birche (Betula spp). The dark brown pulp of the sterile conk is formed by a pure mycelial mass of fungus. Chaga are a folk remedy in Russia, reflecting the circumboreal distribution of I. obliquus in boreal forest ecosystems on Betula spp. and in meridional mountain forests on beech (Fagus spp.) in Russia, Scandinavia, Central Europe, and Eastern Europe. Distribution at lower latitudes in Western and Southern Europe, Northern America, Asia, Japan, and Korea is rare. Infected trees grow for many years without several symptoms of decline. The infection can penetrate through stem injuries with exterior sterile conks developing later. In the Czech Republic, cinder conk is found on birches inhabiting peat bogs and in mountain areas with a colder and more humid climate, although it is widespread in other broad leaved species over the Czech Republic. The most common hosts are B. pendula, B. pubescens, B. carpatica, and F. sylvatica. Less frequent hosts include Acer campestre, Acer pseudoplatanus, Alnus glutinosa, Alnus incana, Fraxinus excelsior, Quercus cerris, Q. petraea, Q. robur, Q. delachampii, and Ulmus sp.

우리나라 논. 밭토양(土壤)의 미생물상(微生物相)에 관한 연구(硏究) -II. 밭 토양미생물(土壤微生物) 분포조사(分布調査) (Studies on Microflora of the Paddy and Upland Soils of Korea -II. Distribution of Microflora of the Upland Soils)

  • 유익동;윤세영;이명구;류진창;허범량
    • 한국토양비료학회지
    • /
    • 제17권4호
    • /
    • pp.406-414
    • /
    • 1984
  • 우리나라 밭 토양(土壤)의 미생물(微生物) 취락수(聚落數)를 밝히기 위하여 주요(主要) 밭 작물(作物)의 주산단지(主産團地)(도시근교채소, 시설원예(施設園藝), 고추, 양파, 마늘, 생강, 포도, 땅콩, 인삼단지(團地)) 토양(土壤)을 대상(對象)으로 전국(全國)에 걸쳐 각(各) 작물당(作物當) 4~8개소(個所) 총(總) 60지점(地點)을 임의로 선정(選定)하여 미생물조사(微生物調査)를 실시(實施)하였다. 얻어진 결과(結果)는 다음과 같다. 1. 우리나라 밭 토양(土壤)의 평균(平均) 미생물(微生物) 취락수(聚落數)는 세균(細菌) $89.2{\times}10^5/g$, 방선균(放線菌) $30.1{\times}10^5/g$, 사상균(絲狀菌) $73.4{\times}10^4/g$으로 밝혀졌으며 B/F, B/A, A/F치(値)는 각각(各各) 122, 3.0, 41정도(程度)이었다. 2. 각(各) 주산단지별(主産團地別) 평균(平均) 미생물(微生物) 취락정도(聚落程度)의 순서(順序)는 다음과 같다. 세 균(細菌) : 시설원예>고추>마늘>생강>양파>도시근교채소>인삼>포도>땅콩단지(團地) 방선균(放線菌) : 마늘>고추>도시근교채소>시설원예=생강>양파>인삼>땅콩>포도단지(團地) 사상균(絲狀菌) : 시설원예>도시근교채소>고추>생강>인삼>포도>땅콩>마늘>양파단지(團地) 3. 밭 토양(土壤) 미생물(微生物) 취락정도(聚落程度)와 토양화학성(土壤化學性) (칼슘, 마그네슘, 인산(燐酸), 총탄소(總炭素) 및 pH)과는 통계적(統計的)으로 유의성(有意性)있는 상관관계(相關關係)가 인정(認定)되었다.

  • PDF

열처리 조건에 따른 Tb이온의 확산 및 Nd-Fe-B 자석의 자기적 특성 (Inward Diffusion of Tb Ions and the Magnetic Properties of the Nd-Fe-B Magnets)

  • 오성욱;김동환;공군승;허영우;김정주;이준형
    • 한국전기전자재료학회논문지
    • /
    • 제30권1호
    • /
    • pp.27-31
    • /
    • 2017
  • In this study, the effect of Tb inward diffusion on the magnetic properties of the Nd-Fe-B sintered magnets was studied. After sintering of the magnets, $TbF_3$ slurries were dip-coated on the surface of the samples, then heat-treatment was followed for $TbF_3$ diffusion. The element distribution in the magnets and the diffusion profiles of Tb ions were analyzed by an EPMA (electron probe micro-analyzer). Prolonged heat treatment resulted in a deeper diffusion length of Tb ions. Coercivity of the $1^{st}$ heat-treated sample showed 21.86 kOe, while that of the $1^{st}$, $2^{nd}$ heat-treated and annealed sample revealed 34 kOe.

항적 신호 모의를 위한 다기종 모노스태틱/바이스태틱 레이다반사면적 분석 (Analysis of Monostatic/Bistatic Radar Cross Section of Multi-target for Target Signals Simulation)

  • 박준식;지성환
    • 한국전자통신학회논문지
    • /
    • 제16권5호
    • /
    • pp.789-798
    • /
    • 2021
  • 본 연구는 레이다 시스템의 성능 검증 및 개선을 위한 표적 신호 모의장비의 표적별 레이다반사면적(RCS) 데이터의 수집 및 분석을 목적으로 민항기(B-747, B-737) 및 전투기(F-16) 기종에 대한 VHF 대역의 모노스태틱/바이스태틱 RCS를 전자기장 분석한 연구이다. 분석에 앞서, 전자기장 분석 도구들에 대한 데이터 교차 검증 및 분석 시간 비교를 통해 소요 시간을 최소화하였으며, 분석 해상도에 따른 보간 오차를 검토하여 분석범위를 선정하였다. 각 기종별로 획득된 RCS 데이터는 입/반사 고각 및 주파수별로 나누어 분석하였으며, 기체 모양 및 입/반사 각도에 따른 RCS 특징을 기술하였다. 마지막으로 RCS 분포 히스토그램을 통해 각 기종별 통계적 RCS 분포값을 제시한다. 향후 본 연구를 통해 획득한 RCS 데이터베이스는 VHF 대역 레이다 시스템의 항적 신호 모의를 위한 신호모사장치에 활용할 예정이다.