• 제목/요약/키워드: Eye-zone

검색결과 79건 처리시간 0.029초

가상주행실험 기반 운전자 시각행태에 따른 옐로카펫 설치 효과 분석 (Analysis of the Effect of Yellow Carpet Installation according to Driving Behavior with Eye Tracking Data)

  • 주성갑;김도훈;문혜민;최호민
    • 한국ITS학회 논문지
    • /
    • 제22권5호
    • /
    • pp.43-52
    • /
    • 2023
  • 옐로카펫 보급된 이후 어린이 교통사고는 감소세이나 아직 옐로카펫 설치와 교통사고간의 인과관계에 대한 설명력은 부족한 상황이다. 기존의 실차조사연구에서 상황 구현의 어려움이나 위험성 등의 이유로 수행하지 못한 다양한 상황을 VR시뮬레이션 실험을 활용하여 옐로카펫 효과를 더욱 심도있게 분석하였다. 실제 옐로카펫이 설치되어있는 대상지를 선정하고, 가상환경으로 구현한 후 시선측정장비를 착용하고 시뮬레이터에 탑승하도록 하였다. 옐로카펫 설치 전·후의 시각/주행행태를 비교하였고, 통계적 검증을 위해 t-test 분석을 수행, 모두 통계적으로 유의한 수준인 것으로 나타났다.

대조차 만리포 해안의 지상 LiDAR와 MBES를 이용한 정밀 지형/수심 측량 및 조간대 접합을 통한 정밀 지형도 작성 (Construction of High-Resolution Topographical Map of Macro-tidal Malipo beach through Integration of Terrestrial LiDAR Measurement and MBES Survey at inter-tidal zone)

  • 심재설;김진아;김선정;김상익
    • 한국해안·해양공학회논문집
    • /
    • 제22권1호
    • /
    • pp.58-66
    • /
    • 2010
  • 본 논문에서는 지상 LiDAR 및 MBES(다중빔 음향측심기)를 이용하여 정밀 지형 및 수심측량을 실시하였고, 조간대 영역의 육도-해도 접합을 통하여 대조차 해안인 만리포에 대한 정밀 지형도를 작성하였다. 제한된 시간내에 조간대 영역의 충분한 지형정보 획득을 위하여 간조시 지상 LiDAR 및 DGPS를 차량지붕에 탑재하여 이동 정지 스캐닝의 해변 전체의 지형정보를 획득하였고, 이와 동시에 만조시 MBES를 통하여 수심측량을 실시하였으며 조위계 설치와 목측을 통한 조위관측의 병행을 통하여 수심보정자료 및 만리포의 평균해면 추산자료로 사용하였다. 조간대 정합을 위해 지형 및 수심자료의 수직좌표계 기준면은 인천 평균해면으로 단일화하였으며, 조간대 평균 중첩오차는 약 2~6 cm 이내로 나타났다. 또한 지상 LiDAR 자료의 정확도 검증을 위해 RTK-DGPS 측량을 동시에 실시하여 수직좌표값을 비교한 결과 평균 제곱근 오차가 약 4~7 cm 이내로 나타났다. 정밀지형도 작성은 GIS 기반 자료처리를 통하여 50 cm 해상도를 갖는 수치표고자료로 생산하였으며, 이는 현재 연안지역 침수범람 예측을 위한 폭풍해일 침수범람 예측모델의 정밀 입력자료로 사용되고 있다. 또한 장기간에 걸친 주기적 측량 자료와 측량시의 인위적 해변 변화량 및 해양환경정보를 함께 고려하여 3차원 공간분석을 실시한다면 침 퇴적양의 정확한 산출을 통하여 연안 모니터링에도 효과적으로 활용될 수 있을 것이다.

SPOT-5 HRG 스테레오 영상으로부터 지형정보 추출 (Extracting Topographic Information from SPOT-5 HRG Stereo Images)

  • 이진덕;이성순;정태식
    • 대한공간정보학회지
    • /
    • 제14권4호통권38호
    • /
    • pp.61-70
    • /
    • 2006
  • 본 논문에서는 SPOT 5호 HRG 스테레오 영상을 이용하여 수치표고모형을 생성하기 위한 사진측량학적 처리과정을 제시하고 수치표고모형 생성을 위한 HRG supermode 영상의 정확도 잠재성을 평가하고자 하였다. 센서모델링을 위하여 광속조정을 행한 후 에피폴라 영상재배열과 영상정합 과정 등을 통하여 수치표면모형을 생성하였다. HRG 영상으로부터 추출된 DEM 성과를 축척 1:5000의 수치지형도로부터 추출된 기준 DEM과 여러 시험구간 상에서 비교하였다. 전체구간 중 5m 미만의 DEM 오차를 나타내는 부분의 비율은 53.8%이었고, 5m를 초과하는 오차부분은 구름, 수역, 건물 등에 의한 영향을 받는 것으로 확인되어 이러한 지역을 제외하고 평가한 정확도는 약 2.5m의 RMSE를 나타내었다. 아울러 추출된 수치표면모형(DSM)을 사용하여 3차원 건물모델과 대상지역 전체의 3차원 가시화 모델을 작성하였다.

  • PDF

3차원 내시경술을 위한 양안 입체 영상처리 및 디스플레이 방법 (Method of Display and Processing of Binocular Stereoscopic Image for 3D Endoscopy)

  • 송철규
    • 대한의용생체공학회:의공학회지
    • /
    • 제19권5호
    • /
    • pp.531-538
    • /
    • 1998
  • 본 논문은 내시경 수술시 입체영상을 제공하여 수술의 편리성과 정확성을 향상시키기 위한 고화질 3차원 내시경 영상의 처리와 디스플레이 방법을 연구하였다. 기존의 3타원 내시경 수술을 위한 디스플레이 방법은 안경 차용의 무게감과 플리커가 심한 전자셔터 방식으로 사용의 불편함이 많았다 된 연구에서는 기존 내시경 영상의 3D 디스플레이 방식인 전자셔터식에 대한 입체 영상의 특징을 분석하고, 이에 대한 문제점을 보완하기 위한 편광방식의 입체 영상처리와 재현 방법에 대하여 연구하였다. 또한 설계한 디스플레이 시스템의 성능 평가를 수행하여 기존 방식인 CRT방식에 의한 영상재현 방법에 비해 화질과 시야각 특성에서 우수함을 확인하였다.

  • PDF

The Experimental Investigations of the Big Size Holographic Screen in the Autostereoscopic Displays

  • Son, J. Y.;Choi, Y. J.;Bahn, J. E.;Bobrinev, V.-I.
    • Journal of the Optical Society of Korea
    • /
    • 제5권2호
    • /
    • pp.55-59
    • /
    • 2001
  • Results of an experimental study of possible ways to extend the capabilities of a big size transmission type holographic screen are presented. Different approaches to the problem of making a big size screen have been considered and tested experimentally. Up to 60$\times$80 $\textrm{cm}^2$ screens have been recorded on a single photographic plate VRP-M. By attaching a mirror behind the screen, the reflection mode of operation has been obtained. In this arrangement some additional peculiarities appear in the screen, which can be used to extend the screen capabilities. The first possibility is to increase the screen size by mosaicking the subscreens in the reflection mode of operation. Screens of 120$\times$80 $\textrm{cm}^2$ and 180$\times$40 $\textrm{cm}^2$ have been obtained by proper alignment of 60$\times$40 $\textrm{cm}^2$ subscreens. The second possibility is to move the viewing Bone by rotation of the screen together with the mirror and thereby realize by the eye-tracking capability. Methods of increasing vertical size of the viewing zone have been considered. Along with the multi-exposure method, which was considered in previous papers, addition of the vertical diffuser with the optimized scattering angle has been tested experimentally. The vertical size of the viewing zone has been increased by up to 10-15 cm. Another method consists of usage of a diffraction grating with vertical dispersion to solve the same problem.

Clinical presentation and treatment outcomes of primary ocular adnexal MALT lymphoma in Thailand

  • Seresirikachorn, Kasem;Norasetthada, Lalita;Ausayakhun, Sakarin;Apivatthakakul, Atitaya;Tangchittam, Sirima;Pruksakorn, Vannakorn;Wudhikarn, Kitsada;Wiwatwongwana, Damrong
    • BLOOD RESEARCH
    • /
    • 제53권4호
    • /
    • pp.307-313
    • /
    • 2018
  • Background Primary ocular adnexal extranodal marginal zone lymphoma of mucosa-associated lymphoid tissue (POML) is the most common subtype of lymphoma involving the eyes in Thailand. We sought to assess the characteristics and treatment outcomes of patients with POML in Thailand. Methods We retrospectively reviewed patient data and included patients diagnosed with POML between January 2004 and December 2016 at Chiang Mai University Hospital and King Chulalongkorn Memorial Hospital, Thailand. We collected and analyzed patients' clinical characteristics and treatment outcomes. Results Among 146 patients with lymphoma involving the eyes, 121 (82%) were diagnosed with POML. Sixty-four (52.9%) were women with median age 58 (range, 22-86) years. The most common presenting symptom was orbital mass (71.1%). Common sites of origin were the orbit (46.3%) and lacrimal gland (34.7%). At presentation, 22.3% of patients had bilateral eye involvement. About half of patients had stage I disease (N=59, 56.2%) and 20% had stage IV. Most patients (73.3%) had a low-risk International Prognostic Index. Radiotherapy was the main treatment for patients with limited-stage disease (66.7% in stage I and 56.5% in stage II). The overall response rate was 100% with complete response rates 80%, 77.3%, and 64.7% for stages I, II, and IV, respectively. Five-year progression-free survival (PFS) and overall survival were 66.1% and 94.0%, respectively. For patients with limited-stage disease, radiotherapy significantly improved PFS compared with treatment not involving radiotherapy (5-year PFS 89.9% vs. 37.3%, P=0.01). Conclusion We revealed that POML has good response to treatment, especially radiotherapy, with excellent long-term outcome.

Ring Furnace를 이용한 Acrylic Resin의 온성에 관한 연구 (A Study on the Heat-Curing of Acrylic Resin using Ring Furnace)

  • 최석순
    • 대한치과기공학회지
    • /
    • 제13권1호
    • /
    • pp.27-31
    • /
    • 1991
  • The purpose of this study was to evaluate the effect of curing time and curing temperature on the hear - Curing of acrylic resin using ring furnace. Specimens were fabricated from 2 kinds(Laboron, Bertex) heat-cured resin. Total 200 samples were divided into 4 groups(70$^{\circ}C$, 100$^{\circ}C$, 13$^{\circ}C$, 150$^{\circ}C$) and each group was divided into 5 small groups(30 min., 45min., 60min., 75min., 90min.). A microscope(Olympus Coll Co. Japan) was used to examine a randomly selected central zone, midzone and surface for each complete specimen. The results of the experiment were as follows : 1. To obtain non-polymerzation, cure the resin for 30 minutes at 70$^{\circ}C$ and 100$^{\circ}C$ in a ring furnace. 2. To obtain with porosity, cure the resin for 45 minutes, 60 minutes and 75 mintes at 70$^{\circ}C$ and for 90 minutes at 150$^{\circ}C$ in ring furnace. Porosity appears in Laboron for 30 minutes, 45 minutes at 150$^{\circ}C$ in a ring furnace. 3. Every other specimens connot get a sight of special problem with makes eye in the made surface.

  • PDF

모서리 부위 연속 용접을 위한 아크 용접 로봇 시스템의 궤적 개발 (Trajectory Development of Robotic Arc Welding System for Continuous Welding of Corner Area)

  • 장교근;유범상
    • Journal of Welding and Joining
    • /
    • 제14권6호
    • /
    • pp.68-80
    • /
    • 1996
  • When a workpiece is to be arc welded around the outside corner, continuous welding without welding seam in the neighborhood of comer still remains a very difficult technique. Skilled welders weld comers by delicate“hand-eye coordination”while turning the workpiece manually, However, there is not a very clear solution to this problem in robotized arc welding process. In order to solve this problem, the coordination of a robot and a positioner with one or two axes is necessary. This paper presents a method of continuous welding around the corner of workpiece using the coordinated motion of a robot and a positioner. The positioner is either revolute jointed or prismatic jointed. In this paper, a clothoid curve is chosen for welding trajectory. The clothoid curve is excellent in connecting straight and curved weld-lines with good continuity and accommodates various welding conditions. By using this welding trajectory, the deceleration, which leads to widening of the melt and the heat affected zone, at comer area is reduced with strategic rotation of robot torch in coordination with a positioner providing smooth transition of welding torch orientation. Two types of special clothoid curves are developed for different weld slope conditions. These clothoid curves are applied to the case of linear and rotary Positioners at arc welding robot work-cell.

  • PDF

자동차 정비공의 혈액 및 뇨검사 소견과 자각증상에 대한 조사 (Laboratory Findings and Subjective Symptoms of Car Repair Workers)

  • 이광성;이명구;조영채
    • 한국환경보건학회지
    • /
    • 제24권2호
    • /
    • pp.80-87
    • /
    • 1998
  • To evaluate the effects on health by exposure to low dose organic solvents, the author analyzed the air concentration of mixed organic solvents (toluene, xylene, butylacetate) at worker's breathing zone during painting, some laboratory findings of blood (WBC, RBC, Hb, Hct, SGOT, SGPT, TC, TG, HDL-C, LDL-C, IgG, IgM, IgA and IgE) and urine (hippuric acid, urinary protein, urobilinogen), surveyed the subjective symptoms those were obtained from 35 male workers exposed to mixed organic solvents, and 25 male workers not exposed to organic solvents who worked in car repair workshops in Taejon area from December 1, 1995, to February 29, 1996. The results were as follows: 1. The mean concentration of urinary hippuric acid of car painting worker group (organic solvent exposure group) was 0.76$\pm$ 0.21 g/l, which is significantly higher than that of non-exposed group. 2. In hematologic findings, the values of RBC, TC, LDL-C, IgG and IgE in the exposure group were significantly lower than those of the nonexposed group, but SGOT and SGPT in the exposure group were significantly higher than those of the non-exposed group. 3. Urinary hippuric acid levels showed positively correlated with toluene, urobilinogen and HDL-C levels, but those were negatively correlated with RBC, LDL-C, IgM levels. 4. Rates of the subjective symptoms such as "dizziness", "appetite loss", "weight loss", "palpitation", "chest tightness", "sore throat and eye discomfort", "tingling sense and acrodynia", "illusion or hallucination" and "decreaased motor power" were significantly higher in the exposure group than those of the non-exposed group.

  • PDF

동해안 해변의 자외선 반사량의 원격탐사 (Remote Sensing of the Ultraviolet Reflectance on the East Coast Beach)

  • 어재선;최철재
    • 한국전자통신학회논문지
    • /
    • 제15권4호
    • /
    • pp.733-738
    • /
    • 2020
  • 최근에는 연안 지역의 개발이 진행됨에 따라 해변 근처에서 레저 활동을 하고 있는 사람들이 증가 하고 있다. 하지만, 오존층의 파괴로 지표면에 도달하는 자외선의 양은 증가하였다. 인체는 자외선에 의한 피부암과 눈 손상 등으로 유해한 영양을 받는다. 특히, 해변에서 자외선의 영향은 모래 표면으로 부터의 반사로 인해 내륙 지역보다 높다. 본 연구는 원격탐사를 이용한 동해안 해변의 자외선 반사 측정 방법의 기초자료로 활용할 수 있을 것으로 기대된다.