• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.150-160
• /
• 2008

The present domestic underwater and ocean facilities management depends on analysis with the naked eye. This study performs quantitative analysis to improve conventional methods, analyze spatial situation of underwater facilities. This research is divided into two steps; underwater image distortion correction and image mosaic step. First, underwater image distortion correction step is for the production of underwater target, calculates the correction parameters, and then developed the method that convert the original image point to whose distortion is corrected. Second step is for the obtaining pipe images installed in the underwater, corrects the distortion, and then transforms a coordinates of the correction pipe image. After coordinate transformation, we make the mosaic image using the singularities. As a result, when we measure the distance between pipe and underwater ground and compare with calculation value on mosaic image, it is showed that RMSE is 0.3cm.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.531-538
• /
• 1998

This paper represents the design of 3D endoscopic image processing system in order to Improve visualization and enhance the ability of the surgeon to perform delicate endoscopic surgery. The proposed 3D systems have four features of stereo endoscopic image processing The multiplexer give field seauential stereo for recording and for aligning cameras and viewing stereo with 3D monitor. Demultiplexing of the field sequential image which separates out the R and L images for dual TFT-LCD 3D monitor viewed with passive polarized glasses. separable processing of the left and right eye images, and design of TFT-LCD 3D monitor. The viewing angle, zone, and image quality of the Polarization-type Stereoscopic Display (SM500TFT-3D) system which we have developed using 15 Samsung TFT-1.CD with a screen resolution of 1024×768 pixels were measured and compared with those of Electric Shutter-type Stereoscopic Display system. The result of experiments shows that the Polarization-type Stereoscopic Display System using TFT-LCD has a wade viewing angle and zone which Is necessary fort multi-view and it has better image quality and stability of the optical performances than the Electric Shutter-type does.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.6
• /
• pp.267-272
• /
• 2016

Microscope cell image is an important indicator for obtaining the biological information in a bio-informatics fields. Since human observers have been examining the cell image with microscope, a lot of time and high concentration are required to analyze cell images. Furthermore, It is difficult for the human eye to quantify objectively features in cell images. In this study, we developed HCS algorithm for automatic analysis of cell image using an OpenCV library. HCS algorithm contains the cell image preprocessing, cell counting, cell cycle and mitotic index analysis algorithm. We used human cancer cell (MKN-28) obtained by the confocal laser microscope for image analysis. We compare the value of cell counting to imageJ and to a professional observer to evaluate our algorithm performance. The experimental results showed that the average accuracy of our algorithm is 99.7%.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2012

In this paper, we proposed and developed a fast and efficient real time face detection and recognition which can be run on embedded system instead of high performance desktop. In the face detection process, we detect a face by finding eye part which is one of the most salient facial features after applying various image processing methods, then in the face recognition, we finally recognize the face by comparing the current face with the prepared face database using a template matching algorithm. Also we optimized the algorithm in our system to be successfully used in the embedded system, and performed the face detection and recognition experiments on the embedded board to verify the performance. The developed method can be applied to automatic door, mobile computing environment and various robot.

• Electronics and Telecommunications Trends
• /
• v.35 no.6
• /
• pp.37-47
• /
• 2020

Today, the volume of international trade by airplanes and ships is rapidly increasing, and the volume of trade over land is expected to increase as inter-Korean relations change. In customs processes, humans inspect using the naked eye; therefore, computer vision technology can be used to assist customs inspectors responsible for X-ray security screening. In particular, because of recent advances in deep learning technology, algorithms for image understanding and object detection performance are improving, and studies on their application to X-ray screening have been published. This manuscript describes trends in artificial intelligence X-ray image-reading technology to detect prohibited items. X-ray inspection AI technology is similar to the Sphinx, which was the guardian of the pyramids in ancient Egyptian mythology.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.3
• /
• pp.211-216
• /
• 2011

The detection of defective parts in a factory is usually performed by the human eye. Therefore, heavy manpower is in demand for minor enterprises. An image processing system is desired to solve this drawback. However, due to the variety of the products characteristics, an general algorithm is needed that can adapt to these characteristics. Therefore, in this paper, the key pad parts' characteristics which need to be dealt with are analyzed in order to embody the image processing algorithm that is suggested. The experimental results show the probability of detecting a defective part is 95% with a detection time of 0.203 seconds, on the average.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.71-77
• /
• 2011

Up to 10% of the global population suffers from color vision deficiency (CVD) [1], especially deuteranomaly and protanomaly, the conditions in which it is difficult to discriminate between red and green hues. For those who suffer from CVD, their career fields are restricted, and their childhood education is frustrating. There are many optical eye glasses on the market to compensate for this disability. However, although they are attractive due to their light weight, wearing these glasses will decrease visual brightness and cause problems at night. Therefore, this paper presents a supplementary device that comprises a head-mounted display and an image sensor. With the aid of the image processing technique of digital color space adjustment implemented in a high-speed field-programmable gate array device, the users can enjoy enhanced vision through the display without any decrease in brightness.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.201-207
• /
• 1998

It was theoretically calculated the image position and size using matrix to obtain the reflection pattern for eye's cornea and crystalline, and made system to measure the reflection pattern by three light sources and a reflex camera. Hyperopia and myopia were measured by reflect pattern using single light source at retina, and cornea and curvature of crystalline were measured by the reflection pattern using double light sources.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.586-591
• /
• 2010

VLC (Visible Light Communication) is a wireless communication method using light that is visible to the human eye. It has a major advantage that it causes no interference to RF-based devices. This makes wireless communication possible in RF hazardous areas such as nuclear facilities. In order to apply VLC communication in harsh environment of nuclear power plant, the high luminance LEDs, which are key components of the VLC communication, have been gamma-ray irradiated at the dose rate of 4kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced color-center was formed in the LED housing cap made of transparent plastic or acryl material. The beam degradations of high luminance LEDs by high dose-rate gammaray irradiation are analyzed using color CCD image processing technology.

• Journal of Korea Game Society
• /
• v.13 no.3
• /
• pp.131-140
• /
• 2013

The study analyzes how to create stereoscopic image in 3-dimension animation 'Yggdrasil', produced in Autodesk Maya(3D animation software), using Anaglyph method that is the oldest in 3-dimension stereoscopic video production. The anaglyph method help to produce stereoscopic images easily and to give effective 3D effect encoding each eye's image using filters of different colors. In addition, space direction applied visual perception theory expresses necessary distance, depth and speed effectively in 'Yggdrasil'