• 청정기술
• /
• 제12권4호
• /
• pp.198-204
• /
• 2006

생분해성 고분자인 폴리카프로락톤을 반응개시제를 첨가하여 반응압출법으로 개질시켰다. 개시제의 함량은 중량 백분율로 0.1, 0.3, 0.5 그리고 1.0% 이었고 이축압출기의 온도는 $130{\sim}180^{\circ}C$로 운전하였다. 개질된 폴리카프로락톤에 대한 열분석, 분자량 분석, 기계적 강도 측정, 유변학적 특성 및 생분해도 연구를 수행하였다. 개질된 폴리카프로락톤은 순수 폴리카프로락톤과 비교하여 여러 물성에서 차이를 보였다. 개시제 1% 개질 폴리카프로락톤은 약 20%의 결정화도 감소, 약 50%의 인장탄성률 상승을 보였고, 복합점도, 유변학적 특성인 저장탄성률 및 손실탄성률의 큰 증가를 보여주었다. 0.1%의 가장 적은 개시제로 개질된 폴리카프로락톤의 생분해도는 순수 폴리카프로락톤과 비슷한 생분해도를 보였으나, 나머지는 생분해도가 증가하였다.

• 한국식품과학회지
• /
• 제33권1호
• /
• pp.55-59
• /
• 2001

쌀의 팽화에 관한 연구는 팝콘에 관한 연구와 비교하면 매우 미흡한 편이다. 쌀을 팽화시킬 때 대부분 가압식 팽화기나 압출성형기를 이용하고 있다. 대부분의 쌀의 팽화에 관한 연구는 인도에서 이루어져 왔으며, 가공조건(수분함량, 가열온도) 등이 팽화쌀의 물리화학적 성질에 관한 연구가 대부분이다. 팝콘과 같은 인스턴트 팽화쌀의 팽화기작 및 개발에 관한 연구는 극히 제한되어 있다. 압출성형 팽화펠릿의 팽화에서 3일 수침 후 분쇄한 찹쌀을 이용하여 수분함량 $20{\sim}27%$, $CO_2$ 가스주입압력 2.8 MPa, 스크류회전속도 200 rpm으로 제조한 펠릿을 microwave oven에서 팽화시 밀도와 조직감이 비교적 낮게 나타나는 경향을 보였다. 또한 압출성형기로 제조된 펠릿의 팽화시 가장 큰 영향인자는 펠릿의 수분함량과 가스주입압력, 스크류회전속도의 조절에 의해 팽화 및 조직감을 최적화 할 수 있었다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.72-72
• /
• 2018

The root of Angelica gigas Nakai (AGN) is used as a traditional herbal medicine in Korea for the treatment of many diseases. However, a major challenge associated with the usage of the active compounds from AGN is their poor water solubility. Therefore, this work aimed to enhance the solubility of active compounds by a chemical (viz. surfactant) and physical (hot melt extrusion) crosslinking method (CPC). Infrared Fourier transform spectroscopy (FT-IR) revealed multiple peaks in extrudate solids representing new functional groups including carboxylic acid, alkynes and benzene derivatives. Differential scanning calorimetry (DSC) analysis of the extrudate showed lower glass transition temperature (Tg) and lower enthalpy (${\Delta}H$) (Tg: $43^{\circ}C$; ${\Delta}H$: <6 (J/g)) compared to the non-extrudate (Tg $68.5^{\circ}C$; ${\Delta}H$: 123.2) formulations. X-ray powder diffraction (XRD) analysis revealed amorphization of crystal materials in extrudate solid. In addition, nanonization, enhanced solubility and higher extraction of phenolic compounds were achieved in the extrudate solid. Among the different extrudates, acetic acid- and Span 80-mediated formulations showed superior extractions. We conclude that the CPC method successfully enhanced the production of amorphous nano dispersions from extrudate solid formulations.

• 한국약용작물학회지
• /
• 제26권4호
• /
• pp.317-327
• /
• 2018

Background: The root of Angelica gigas Nakai is used as a traditional herbal medicine in Korea for the treatment of many diseases. However, the poor water solubility of the active components in A. gigas Nakai is a major obstacle to its bioavailability. Methods and Results: This work aimed at enhancing the solubility of the active compounds of A. gigas Nakai by a chemical (using a surfactant) and physical (hot melt extrusion, HME) crosslinking method. Fourier transform infrared spectroscopy revealed multiple peaks in the case of the extrudate solids, attributable to new functional groups including carboxylic acid, alkynes, and benzene derivatives. Differential scanning calorimetry analysis showed that the extrudate soilid had a lower glass transition temperature ($T_g$) and enthalpy (${\Delta}H$) ($T_g:43^{\circ}C$, ${\Delta}H$ : < 6 J/g) as compared to the non-extrudate ($T_g:68.5^{\circ}C$, ${\Delta}H:123.2$) formulations. X-ray powder diffraction analysis revealed the amorphization of crystalline materials in the extrudate solid. In addition, enhanced solubility (53%), nanonization (403 nm), and a higher amount of extracted phenolic compounds were achieved in the extrudate solid than in the non-extrudate (solubility : 36%, nanonization : 1,499 nm) formulation. Among the different extrudates, acetic acid and span 80 mediated formulations showed superior extractions efficiency. Conclusions: HME successfully enhanced the production of amorphous nano dispersions of phenolic compound including decursin from extrudate solid formulations.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1059-1060
• /
• 2006

The creep behavior of Al-5vol.% SiC composite was investigated. The composite powder was produced by mechanical milling and hot extruded at $450^{\circ}C$ at ratio of 16:1. A creep test was carried out at a constant load at 598, 648, and 673 K. Using the steady-state equations, the threshold stress and the stress exponent of the creep as a function of temperature were determined. The stress exponent was found to be 3 at the temperature of 673 K and 8 at 598 and 648 K. The dependency of the threshold stress to temperature obeys the Arrhenius relationship with the energy term of $29\;kJ\;mole^{-1}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.890-893
• /
• 2001

Two-layer self bonding insulating tape consists of butyl rubber(IIR ; Isobutylene-isoprene rubber) adhesive layer and polyethylene protective film. Butyl rubber have inherent characteristics such as resistance to corrosion and water, low temperature flexibility, excellent electrical insulating properties also resistance to environmental effect such as ozone and ultraviolet. Polyethylene film was used for the purpose of good insulating properties and resistance to ozone and ultraviolet. The tape was manufactured using extrusion and calender method.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.6-12
• /
• 2017

In a large 3D printer when the cooler, which cools the filament, acts in one direction, the area directly exposed to the cooling is cooled to the proper temperature. However, the cooling effect on the opposite area is relatively less. It was found in experiments that filaments with a thickness of over 2 mm exhibit the cooling problem in one directional cooling. Consequently, cooling was performed to prevent the flow-down and to produce firm support leading to an improvement in product quality in extrusion. Further, the lay-up of a 3D printer with five guides combined with a duct was achieved. Analysis showed that the improvement in the cooling effect enables stable extrusion and lay-up and thus, reduces fabrication time.

• Food Science and Biotechnology
• /
• 제16권3호
• /
• pp.381-385
• /
• 2007

The objective of this experiment was to study the influence of feed moisture content on the degree of enzymatic hydrolysis of com starch in a twin screw extruder and the saccharification yield of the dried extrudate. The feed moisture content was set at 25, 30, and 35% and ${\alpha}$-amylase solution was directly injected into the feed section at a barrel temperature of $95^{\circ}C$ and screw speed of 250 rpm. Amyloglucosidase was used for the saccharification of the dried extrudate at a concentration of 0.055%(w/w). Expansion ratio and swelling factor of extrudates decreased with increasing the feed moisture content. Addition of ${\alpha}$-amylase during extrusion process raised reducing sugar content of extrudates which also increased with the feed moisture content. The saccharification yield of dried extrudate was higher for the extrudate with lower feed moisture content.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.278-282
• /
• 2010

In this research, the friction and wear characteristic behaviors of coating materials of TiAlN and CrAlN were investigated. The wear test was conducted in air and un-lubricated state using the reciprocating friction wear tester. Temperature were 50 and $120^{\circ}C$, and load were 3, 7, and 11 kgf for tests. By comparing the coefficient of friction and observing the wear microstructure, the friction and wear characteristic behaviors of TiAlN and CrAlN coating layers on SKD61 were investigated. The coefficient of friction of CrAlN coating was lower than that of TiAlN at all conditions. Therefore, CrAlN was suggested to be more advantageous coating than TiAlN for the extrusion mold of aluminum.

• 열처리공학회지
• /
• 제26권4호
• /
• pp.165-172
• /
• 2013

In the present study, the microstructure and solution treatment response of Al-Zn-Mg alloys bars by thixo-extrusion was investigated. The alloy bars were solution treated at 400, 430, 460 and $490^{\circ}C$ for various times. In order to examine the microstructures and phase analysis of the samples after solution treatment, it was performed by optical and scanning electron microscopy. And, Vickers hardness and electrical conductivity was measured on the solution treated samples for each condition to investigate the solution treatment response of extruded bars during solution treatment. The results show that the optimum solution heat treatment conditions of thixo-extruded Al-Zn-Mg alloy for minimization of the grain growth and degradation promotion of the second phase is a temperature of $460^{\circ}C$ and holding time of 0.5 to 2 h.