Browse > Article
http://dx.doi.org/10.7735/ksmte.2017.26.1.6

Developing Integrated Compressor Cooler System of 3D Printing Nozzle  

Son, Ji-Hwan (Computer Aided Mechanical Design, Korea Polytechnic VII Colleges)
Park, Hyun-Woo (Computer Aided Mechanical Design, Korea Polytechnic VII Colleges)
Ha, Dong-Woo (Computer Aided Mechanical Design, Korea Polytechnic VII Colleges)
Lee, Chang-U (Computer Aided Mechanical Design, Korea Polytechnic VII Colleges)
Kim, Jin-Su (Computer Aided Mechanical Design, Korea Polytechnic VII Colleges)
Kang, Seong-Ki (Computer Aided Mechanical Design, Korea Polytechnic VII Colleges)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.26, no.1, 2017 , pp. 6-12 More about this Journal
Abstract
In a large 3D printer when the cooler, which cools the filament, acts in one direction, the area directly exposed to the cooling is cooled to the proper temperature. However, the cooling effect on the opposite area is relatively less. It was found in experiments that filaments with a thickness of over 2 mm exhibit the cooling problem in one directional cooling. Consequently, cooling was performed to prevent the flow-down and to produce firm support leading to an improvement in product quality in extrusion. Further, the lay-up of a 3D printer with five guides combined with a duct was achieved. Analysis showed that the improvement in the cooling effect enables stable extrusion and lay-up and thus, reduces fabrication time.
Keywords
3D Printer; Cooling; Flow analysis; Heat flow;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Han, C. M., Lee, B. K., 2015, Surface Characteristic in Mechanical Machining of 3D-printed ABS Part, Proceedings of the KSMPE Conference, 77.
2 Park, J. H., Park, S. J, Lee., K. H., Lyu, M. Y., 2015, A study on the Deposition Strength of 3D Printed Specimen by Fused Deposition Modeling Process, Fall Conferences of the KSMTE, 43.
3 Choi, J. W., Kim, H.C., 2015, 3D Printing Technologies-A Review, Journal of the KSMPE, 14:3 1-8.
4 Choi, C. Y., 2016, 3D Printer Particle Emission Characteristics Measurement, A Thesis for a Master Degree, Hanyang University, Republic of Korea, 26.