• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.5-10
• /
• 2013

The regenerative pump is a kind of turbomachine which is capable of developing high pressure rise at relatively lower flow rates compared to the centrifugal and axial pumps. Although the efficiency of regenerative pumps is much lower than other turbomachines, still they have been widely used in many industrial applications for working at low specific speeds. There are some theoretical models to analysis the pump performance, however, the effect of the blade angle on the pump performance has not been covered in any model to date. In the present study, experimental study on the regenerative pump performance according to the impeller blade angle and its shape has been carried out. The straight radial blades with forward, backward and chevron blades which have inclined angles of $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ were tested. The pump performance characteristics as the pressure head, efficiency were obtained depending on the flow rate for every impeller, and their results, expressed in appropriate non-dimensional coefficients, were compared and analysed in detail. From the experimental results, it was found that the pressure head and the efficiency depend strongly on the blade angles as well as the blade type. These experimental data has made it possible to better understand the effects of the blade angle on the pump performance, and widen the applicability of the current performance analysis and design models with including the effect of blade angles.

• 플랜트 저널
• /
• 제9권2호
• /
• pp.42-45
• /
• 2013

이산화탄소로 대표되는 온실가스 저감이 세계적인 이슈가 됨에 따라, 이산화탄소 포집 및 저장(CCS: Carbon Capture & Storage)에 대한 연구도 활발히 이루어지고 있다. 본 연구에서는 연간 1만 톤급 이산화탄소의 지중저장용 파일럿 주입플랜트를 개발하였다. 주입플랜트의 핵심 구성품은 액상 이산화탄소를 주입조건으로 가압하는 가압펌프, 가압펌프 입구조건 확보를 위한 부스터 펌프, 초임계 상태로 이산화탄소를 승온시키는 인라인 히터 등이 있다. 개발된 구성품들을 바탕으로 전체 주입시스템을 설계, 제작하였다. 제작된 시스템의 시운전을 통하여, 인버터 조절에 따른 압력상승, 펌프 모터 회전수와 주입밸브 제어를 통한 주입압력 유지, PID 제어를 통한 온도확보가 적절히 이루어짐을 확인하였다. 전체 소비전력은 2,000 ~ 2,500 W로, 가압펌프의 소비전력이 75% 이상을 차지하였다. 본 이산화탄소 주입용 파일럿 플랜트는 향후 온실가스 저감 사업에 유일한 국산화 기기로서 다양하게 활용될 것으로 예상된다.

• 산업기술연구
• /
• 제22권B호
• /
• pp.219-230
• /
• 2002

The sliding stability of monolithic vertical caisson of composite breakwaters is quantitatively analyzed by using a reliability model, FMA of Level II, in order to study the variation of sliding failure of caisson due to the occurrence of extreme waves exceeded deepwater design wave. The reliability index and several parameters in the wave pressure formula are inter- related to find out the effects of extreme wave exceeded design wave on the sliding failure of vertical monolithic caisson. The sliding failure of caisson seems to be largely increased as the heights and periods of extreme waves exceeded design wave increase, also depends directly on the water depth in front of the composite breakwaters. From the numerical simulations carried out with several kinds of extreme waves exceeded design wave which are assumed to be occurred during the service periods of breakwater, it is found that the effects of the wave height on the sliding failure of caisson may be more dominant than those of wave periods and angles of wave incidence.

• 대한토목학회논문집
• /
• 제43권6호
• /
• pp.699-708
• /
• 2023

원자력 발전소는 안전하게 운영될 수 있도록 설계단계에서 자연재해를 포함한 예상 가능한 모든 외부사건들이 고려되고 있다. 그러나 최근에 기후변화로 인해 설계를 초과하는 자연재해의 발생 가능성이 증가하면서 설계 당시에 예측하지 못했던 극한자연재해와 외부사건에 대해 세심한 검토가 요구되고 있다. 본 연구에서는 국내 원전 부지별 잠재적 극한자연재해를 선별하고자 하였다. 이를 위해서 원전 부지특성과 원전 부지별 외부재해로 인해 발생한 사건을 조사하고 분석하였다. 그리고 기존 문헌과 연구 자료를 조사하여 국내 원전 실정에 맞는 선별절차와 기준을 수립하였다. 본 연구에서 수립된 선별기준에 근거하여 원전 부지별로 정성적 선별을 수행하였고, 선별된 자연재해를 대상으로 정량적 선별과 현장실사를 통해 국내 원전 부지별 잠재적 극한자연재해를 선별하였다. 선별 결과, 폭우에 의한 내부침수 이외에도 강풍에 의한 풍압과 극한 공기압이 모든 부지에서 공통적인 잠재적 극한자연재해로 선별되었다. 그리고 고리부지의 경우 폭풍해일이 1순위의 잠재적 극한자연재해로 선정되었다.

• 새물리
• /
• 제69권10호
• /
• pp.1107-1114
• /
• 2019

다양한 기능의 새로운 물질을 합성하고 정적 및 동적 특성을 조사하기 위해서는 매우 안정된 고온 및 고압 조건을 만드는 것이 중요하다. 새로운 물질을 제조하는 데 필요한 다이아몬드 엔빌 셀 (DAC)을 사용하여 Mbar 범위의 고압 조건은 이미 확보되었다. 이 연구에서는 DAC와 결합된 레이저 가열 시스템을 설계하였으며, DAC의 양쪽 방향에서 시료를 가열하기 위해 2 대의 1064 nm, 100 W 파이버 레이저를 사용했을 뿐만 아니라 3 대의 분광기를 사용하여 온도, 압력 및 라만 스펙트럼을 측정하였다. 고압 실험에서 시료를 가두는 구멍으로 일반적으로 사용되는 스테인리스 강 개스킷을 가열하여 열 방사선원을 만들고, 이 방사선원으로부터 방출되는 복사 스펙트럼을 획득하여 가열된 개스킷의 온도를 측정하였다. 이 기술을 적용하여 다양한 물질들을 만들고 극한 조건에서 물리적 특성을 조사 할 수 있다.

• Wind and Structures
• /
• 제15권2호
• /
• pp.87-109
• /
• 2012

A substantial part of South Africa is subject to more than one strong wind source. The effect of that on extreme winds is that higher quantiles are usually estimated with a mixed strong wind climate estimation method, compared to the traditional Gumbel approach based on a single population. The differences in the estimated quantiles between the two methods depend on the values of the Gumbel distribution parameters for the different strong wind mechanisms involved. Cluster analysis of the distribution parameters provides a characterization of the effect of the relative differences in their values, and therefore the dominance of the different strong wind mechanisms. For gusts, cold fronts tend to dominate over the coastal and high-lying areas, while other mechanisms, especially thunderstorms, are dominant over the lower-lying areas in the interior. For the hourly mean wind speeds cold fronts are dominant in the south-west, south and east of the country. On the West Coast the ridging of the Atlantic Ocean high-pressure system dominate in the south, while the presence of a deep trough or coastal low pressure system is the main strong wind mechanism in the north. In the central interior cold fronts tend to share their influence almost equally with other synoptic-scale mechanisms.

• Wind and Structures
• /
• 제36권1호
• /
• pp.41-60
• /
• 2023

The effect of cladding panel size on the size reduction factor (SRF) of extreme area-averaging wind pressure (EAWP) on the facades of a high-rise building is often ignored in previous studies. Based on wind tunnel tests, this study investigated the horizontal and vertical correlations of wind pressure on the facade claddings of square-section high-rise buildings. Then, the influencing parameters on the SRF of the EAWP on the cladding panels were analyzed, which were the panel area, panel width, panel length and building width. The results show clear regional distinctions in the correlation of wind pressures on the building facades and the rules of the horizontal and vertical correlations are remarkably different, which causes the cladding size ratio to impact the SRF significantly. Therefore, this study suggests the use of the non-dimensional comprehensive size parameter b^𝜶h^1-𝜶/B (𝜶 is the fitting parameter) determined by the cladding panel horizontal size b, cladding panel vertical size h and the building width B rather than the cladding panel area to describe the variation of the EAWP. Finally, some empirical formula for the SRF of the EAWP on the cladding of a high-rise building is proposed with the nondimensional comprehensive size parameter.

• 설비공학논문집
• /
• 제27권8호
• /
• pp.426-431
• /
• 2015

The advantages of a printed circuit heat exchanger (PCHE) are the compactness and efficiency derived from its heat-transfer characteristics; furthermore, a PCHE for which a diffusion bonding method was used during production can be applied to extreme environments such as a cryogenic condition. In this study, a micro-channel PCHE fabricated by diffusion bonding was investigated in a cryogenic environment regarding its thermal performance and the pressure drop. The test rig consists of an LN2 storage tank, vaporizers, heaters, and a cold box, whereby the vaporized cryogenic nitrogen flows in hot and cold streams. The overall heat-transfer coefficients were evaluated and compared with traditional correlations. Lastly, we suggested the modified heat-transfer correlations for a PCHE in a cryogenic condition.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.263-264
• /
• 2002

The tribological characteristic of several environmentally friendly lubricating base stocks was examined, and the effect of some commonly used additives on th tribological behavior of the lubricating oils was comparatively investigated on a four-ball machine. It has been found that the commercial additives including butene sulfide, wax chloride, zinc dialkyldithiophosphate and ashless P-N type agent helped to improve the friction-reducing and antiwear properties as well as the extreme pressure behavior. Non-toxic nanoscale $(CF)_x$ showed the best friction-reducing ability, though it registered relatively poor extreme pressure properties. The mechanism on friction of nano-scale material is discussed.

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.272-276
• /
• 2010

Aminated oilve oil derivative as the new organic disperse phases of the water soluble metal working fluid has been synthesized and tribological properties of the aqueous solutions composed of aminated olive oil derivative investigated using Four Ball Wear Tester and Falex EP Tester. The formulated aqueous solutions showed higher antiwear and extreme pressure properties and also lower friction coefficient. On the basis of the the results, water soluble aminated oilve oil derivative showed excellent tribological properties due to the polarizability of oleic acid derivative composed of majority part in oilve oil.