• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.169-175
• /
• 2000

Since the late 19th Century, modern architecture of definite figure and form shared similar concepts on space and from with the abstract art, pursuing the geometric purity and the abstraction. So the reductive approach had been taken in modern architecture as well as on modern art. The 1960 minimal art had experimented an extreme reduction with the cubic forms and the plane canvases, embodying so called minimal-art content, it was just another version of modernism art interpreted by the extreme reduction. The reduction is a characteristics of modernism adopted in every art field, including architecture. Not from the apparent, but from the essential quality of architectural form, figure and space resulting from the reductive approach, a building in this trend schould be judged and appreciated. In many aspects, Korean traditional architecture has been shown the characteristics of Minimal Architecture. With these points of view, this study analyzes characteristics of Korean traditional architecture with above contents through the form and space.

• Korean Journal of Mathematics
• /
• v.19 no.1
• /
• pp.1-16
• /
• 2011

In this paper, using differential operator, we have introduce new class of p-valent uniformly convex functions in the unit disc U = {z : |z| < 1} and obtain the coefficient bounds, extreme bounds and radius of starlikeness for the functions belonging to this generalized class. Furthermore, partial sums $f_k(z)$ of functions $f(z)$ in the class $S^*({\lambda},{\alpha},{\beta})$ are considered. The various results obtained in this paper are sharp.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.1
• /
• pp.1-16
• /
• 1996

Earlier in 1935[12], M. S. Robertson introduced the class of quadrant preserving functions. More precisely, let Q be the class of all functions f(z) analytic in the unit disk $D = {z : $\mid$z$\mid$ < 1}$ such that f(0) = 0, f'(0) = 1, and the range f(z) is in the j-th quadrant whenever z is in the j-th quadrant of D, j = 1,2,3,4. This class Q contains the subclass of normalized, odd univalent functions which have real coefficients. On the other hand, this class Q is contained in the class T of odd typically real functions which was introduced by W. Rogosinski [13]. Clearly, if $f \in Q$, then f(z) is real when z is real and therefore the coefficients of f are all real. Recently, it was observed by Y. Abu-Muhanna and T. H. MacGregor [1] that any function $f \in Q$ is odd. Instead of functions "preserving quadrants", the authors [1] have introduced the notion of "preserving sectors".

• Communications for Statistical Applications and Methods
• /
• v.13 no.2
• /
• pp.309-318
• /
• 2006

There are many statistical methods of testing the equality of two population variances. Among them, the well-known F test is very sensitive to the normality assumption. Several other tests that do not assume normality have been proposed, but these tests usually need tables of critical values or software for hypotheses testing. McGrath and Yeh (2005) suggested a quick and compact Count Five test requiring only the calculation of the number of extreme points. Since the Count Five test uses only extreme values, this discards some information from the samples, often resulting in a degradation in power. In this paper, an alternative Count Five test using the trimmed mean is proposed and its properties are discussed for some distributions and normal mixtures.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.38-44
• /
• 1995

This paper presents a method to measure the position and orientation of a Cylindrical Object(unknown the eiameter and length) lying on a floor, using a camera. The two extreme cross section of the cylinder will be viewed as distorted ellipese or circular are, while its limb edge will be shown as two straight lines. The diameter of the cylinder is determined from the geometric properties of the two straight lines, which in turn provides information regarding the length of the cylinder. From the 3-dimensional measurement, the 3D coordinates of the center points of the two extreme cross sections are determined to give the position and orientation of the cylinder. This method is used for automated pick-and-place operations of cylinder, such as sheet coils, or drums in warehouses.

• Journal of Pharmacopuncture
• /
• v.4 no.3
• /
• pp.109-117
• /
• 2001

Objective : There has been no known report on the pain shock after administering Korean bee-venom therapy. Three accounts of pain shock were observed at the Sangji university affiliated Oriental medicine clinic from July 2001 through September 2001. This thesis will inform clinical progression and cautions on administering Korean bee-venom therapy. Methods: We were able to witness different patterns of pain shock during the treatment of degenerative knee joint, progressive oral paralysis, and A.L.S. In order to reduce heat toxicity of the bee venom, needling points were first massaged with the ice for 10 minutes before injecting $0.1{\sim}0.2cc$ of the bee venom. Points of injection were ST36, LI11, LI4 and others. Pain shock occurred after injecting on inner xi-an, outer xi-an and LI4. The phenomena associated with pain shock was recorded in chronological order and local changes were examined. Results: Through examining 3 patients with the pain shock, we managed to observe clinical progression, duration, and time linked changes on specific regions. We also managed to determine sensitive needling points for the pain shock. Conclution: Following results were obtained from 3 patients with the pain shock caused by Korean bee-venom therapy from July 2001 to September 2001. 1. Either positive or negative responses were shown after the pain shock. For case 1, extreme pain was accompanied with muscular convulsion and tremble, ocular hyperemia, delirium, stiffening of extremities, and hyper ventilation which all suggest positive responses. For case 2 and 3, extreme pain was accompanied with facial sweating, asthenia of extremities, pallor face, dizziness, weak voice, and sleepiness which are the signs of negative responses. 2. The time required to recover to stable state took nearly an hour (including sleeping time) and there was no side effect. 3. Precautions required to prevent the pain shock includes full concentration from the practitioner, accurate point location, precise amount of injection, physiological condition and psychological stability of the patient 4. Coping with the pain shock should be similar with a needle shock, and since extreme pain is accompanied, sufficient psychological rest must be provided. 5. Pain shock occurs because the patient cannot tolerate stimulation on the needling point. Thus, symptoms were similar to the needle shock in addition to excruciating pain. Further investigation and research must be done to have better understanding of an immune response and the pain shock associated with Korean bee-venom therapy.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.758-766
• /
• 2005

This study was conducted to evaluate the effect of the transverse troughs on hydrodynamic behavior within the a certain full-scale sedimentation basin (flow rate/one basin; $10,000m^3/d$) using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 36 points in the full-scale sedimentation basin, whose outlet structure is inadequate, with ADV technique. Both the CFD simulation and the ADV measurement results were in good accordance with each other. From the CFD simulation results of the existing basin, it was investigated that extreme upward flow occurs in the near of two transverse troughs. It was suspected that since the transverse troughs converted the open channel flow into the local closed pipe flow, the increased pressure in this local closed pipe flow region made the extreme upward flow. For solving this problems, it was suggested to modify transverse-typed launder into finger-typed launder and to install a longitudinal baffle in the center in this study. The CFD simulation results of all suggested amendments told us that the extreme upward flow, had occurred especially in the beneath of transverse troughs, was much less in the case of finger typed launder basin than that in the existing basin. Also, it was predicted that installing a longitudinal baffle made the fully developed flow which is more effective for sedimentation.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.32-43
• /
• 2009

In this paper, we improve the performance of cardiac disorder classification by continuous heart sound signals using automatic segmentation and extreme learning machine (ELM). The accuracy of the conventional cardiac disorder classification systems degrades because murmurs and click sounds contained in the abnormal heart sound signals cause incorrect or missing starting points of the first (S1) and the second heart pulses (S2) in the automatic segmentation stage, In order to reduce the performance degradation due to segmentation errors, we find the positions of the S1 and S2 pulses, modify them using the time difference of S1 or S2, and extract a single period of heart sound signals. We then obtain a feature vector consisting of the mel-scaled filter bank energy coefficients and the envelope of uniform-sized sub-segments from the single-period heart sound signals. To classify the heart disorders, we use ELM with a single hidden layer. In cardiac disorder classification experiments with 9 cardiac disorder categories, the proposed method shows the classification accuracy of 81.6% and achieves the highest classification accuracy among ELM, multi-layer perceptron (MLP), support vector machine (SVM), and hidden Markov model (HMM).

• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.22.1-22.8
• /
• 2023

Objectives: This study was conducted to evaluate and compare the tip and taper compatibility of accessory gutta-percha points (AGPs) with various rotary and reciprocating instruments. Materials and Methods: Using a profile analyzer, tip and taper measurements were taken of 10 AGPs of each of the 14 models available from Odous de Deus and the 4 models available from Dentsply-Maillefer. Diameter measurements were taken at 1-mm intervals, from 3 mm from the tip (D3) to 16 mm. Results: Based on the mean values obtained, 3-dimensional (3D) models of the AGPs were drawn in Autodesk Fusion 360 and superimposed on 3D models of each instrument selected (Mtwo, Reciproc, RaCe, K3, and ProDesign Logic) to determine the compatibility between the instrument and the AGP. Data corresponding to the tips and tapers of the various AGPs, as well as the tip and taper differences between the AGPs and the instruments, were analyzed using descriptive statistics. The tapers of the AGPs were subject to the American National Standards Institute/American Dental Association No. 57 standard. The Odous de Deus extra-long medium and extra-long extra-medium AGPs were shown to be compatible with Mtwo, K3, and ProDesign Logic instruments with taper 0.06 and tip sizes 25 and 30, while the Dentsply fine and fine medium cones were compatible with Mtwo, RaCe, and K3 instruments with conicity of 0.04 and tip sizes 35 and 40. Conclusions: Both the Odous de Deus and Dentsply commercial brands included 2 AGP models with tip (D3) and taper compatibility with Mtwo, RaCe, K3, and/or Prodesign Logic instruments.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.28.2-28.2
• /
• 2010

We have investigated seven Extreme-Ultraviolet (EUV) bright points in the active region (AR 10926) on 2006 December 2 by the EUV imaging spectrometer (EIS) onboard Hinode spacecraft. We determined their Doppler velocities and non-thermal velocities from 15 EUV spectral lines (log T=4.7-7.2) by fitting each line profile to a Gaussian function. We present the Doppler velocity map as a function of temperature which corresponds to a different height. As a result, these active region bright points show two different types of characteristics. Type 1 bright point shows a systematic increase of Doppler velocity from -68 km/s (blue shift) at log T=4.7 to 27 km/s (red shift) at log T=6.7, while type 2 bright points have Doppler velocities in the range of -20 km/s and 20 km/s. Using MDI magnetograms, we found that only type 1 bright point was associated with the canceling magnetic feature at the rate of $2.4{\times}10^{18}$ Mx/hour. When assuming that these bright points are caused by magnetic reconnection and the Doppler shift indicates reconnection out flow, the pattern of the Doppler shift implies that type 1 bright point should be related to low atmosphere magnetic reconnection. We also determined electron densities from line ratio as well as temperatures from emission measure loci using CHIANTI atomic database. The electron densities of all bright points are comparable to typical values of active regions (log Ne=9.9-10.4). For the temperature analysis, the emission loci plots indicate that these bright points should not be isothermal though background is isothermal. The DEM analysis also show that while the background has a single peak distribution (isothermal), the EUV bright points, double peak distributions.