• 한국농림기상학회지
• /
• 제12권3호
• /
• pp.157-172
• /
• 2010

월별 $2{\sigma}$값 분포를 보면, 4~7월까지 4개월 동안, 전국에서 $2{\sigma}$값이 가장 크게 나타난 곳은 강릉이었으며, 또한, 동해안 지역이 다른 지역에 비해 상대적으로 제일 큰 값이 나타나, 기후학적으로 기온 변동폭이 큰 지역임을 뚜렷이 잘 보여주었다. 그리고 전 지역 평균한 $2{\sigma}$값의 월별 크기를 비교해보면, 4월의 $2{\sigma}$값이 5.6도로 제일 컸다. 월별 이상저온 및 이상고온 출현일수 분포에서는, 4월의 경우, 30일 이상의 이상고온 출현 일수를 기록한 지역은 대부분의 서해안 지역과 동해안 지역인 속초와 영덕, 그리고 제주이다. 특히 강화에서는 이상고온 출현 일수가 무려 45일이나 되었으며, 조사 월인 4~10월 중에서 이상고온 출현 일수가 제일 많은 월로, 그리고, 이상저온 출현 일수가 제일 적게 나타난 월이었다. 따라서 4월의 경우, 동해안 지역과 서해안 지역은 이상저온에 따른 냉해보다는 이상고온에 따른 피해 대책에 더욱 유의할 필요가 있겠다. 한편, 8월은 기후학적으로 제일 더운 계절이지만, 이상저온 출현 일수가 30일 이상이 되는 지역이 분석기간 중에서 제일 광범위하며, 또한 이상저온 출현 일수가 제일 많은 달이다, 특히, 강원도 내륙, 충청도 내륙, 그리고 남부 지방에서 최다인 반면에, 이상고온 출현 일수가 제일 적게 나타난 월이었다. 따라서 8월은 모든 월 중에서 이상고온보다는 이상저온과 관련하여 농작물 재배에 있어 제일 세심한 관리가 요구되는 월로 분석되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.63-66
• /
• 2004

The extraordinary intrinsic properties of SiC have made this material a suitable choice to use in high temperature, high frequency, and high voltage applications. In additional to these, SiC could be employed as the based material for nonvolatile memory applications, mainly due to its extremely low thermal-generation rate at room temperature. In this paper, the reasons of using this material in this particular application is presented and the development of the application over the past fifteen years is reviewed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.705-712
• /
• 2009

The state changes of ocean covered over 70% of earth surface are one of the greatest factor of weather catastrophe. Recently weather extraordinary events are followed by steep increase of sea water temperature and scientists in various fields are studying and warning the weather changes. In this paper, floating buoy is developed to monitor ocean environments via Orbcomm satellite and a method is proposed to increase measurement accuracy of sea water temperature with common low price temperature sensor. Experimental results are presented to illustrate the usability and effectiveness of the developed system. A web-based real time monitoring system is built to monitor ocean environmental information such as sea and air temperature, salinity according to the position of buoy through the internet for user convenience.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.298-303
• /
• 1996

A double diffusion technique is developed to enhance the effective mode index of optical waveguides in $LiTaO_3$. It consists of Zn diffusion from the vapor phase at relatively low temperatures (750->$800^{\circ}C$), into waveguides initially produced by Ti indiffusion at higher temperature (1150->$1200^{\circ}C$). Both X- and Z-cut substrates are investigated. A model that combines profiles of both diffusion is formulated to calculate the expected effective index values for planar waveguides. Good agreement is found between experimental results and model predictions which assume that the initial Ti profile is not affected by the lower temperature Zn diffusion. Effective index enhancements as high as 0.005 and 0.003 are obtained by this method for the fundamental extraordinary and ordinary modes, respectively.

• 소성∙가공
• /
• 제21권3호
• /
• pp.207-214
• /
• 2012

High temperature deformation behavior of a $Ni_{30}Fe_{53}Co_{17}$ alloy, with its extraordinary low coefficient of thermal expansion less than $10{\times}10^{-6}K^{-1}$ at temperatures ranging from room temperature to 673K, was investigated by conducting a series of compression tests. From an empirical processing map, the appropriate working temperature-strain rate combination for optimum forming was deduced to be in the ~1373K, $10^{-2}s^{-1}$ region. This region has a relatively high power dissipation efficiency, greater than 0.36. Furthermore, open die forging of a 100mm diameter billets was performed to confirm the variation of thermo-physical properties in relation to microstructure. The coefficient of thermal expansion was found to increase considerably with increasing the open die forging temperature and decreasing the cooling rate, which in turn provides a drastic increase in the average grain size.

• 한국지역지리학회지
• /
• 제2권2호
• /
• pp.103-111
• /
• 1996

본 연구는 지표상의 기상 요소의 분포 특성이 이압계(氣壓系)뿐만 아니라 기압계를 지배하는 상충대기의 상층대기의 환류(還流)의 특성과도 밀접한 관계가 있음을 기준하여, 우리나라에 있어서 지난 30년간($1965{\sim}1994$) 28개 관측지점을 대상으로 동계 기온을 표준편차(標準偏差)에 의해 분류하였으며, 여기서 나타난 이상한(異常寒) 난월(暖月) 중 대표적인 1992년(이상난한동월(異常暖寒冬月), EH)과 1984년(이상한동월(異常寒冬月), EL)의 1월에 있어 500hPa면 고도 특성 및 몇 가지의 분석을 통하여 한 난동월의 특징을 살펴보았다. 난동월(暖冬月)에서는 강수량이 많았다. 우리나라의 경우 500hPa면은 난동월(暖冬月)에는 trough를 한동월(寒冬月)에는 남북유형(南北類型)유형을 나타내고 있다. 순환의 특징에서 우리나라 부근의 500hPa면 고도는 난동월년이 1984년에 비해 높았고, 동서지수에 있어서도 난동월이 높았다. 이외에도 환류형과 환류파수형에서는 난동월이 M형의 3파수, 1984년이 5형의 3파수(波數)로 나타나 단지 파수형(波數型)만으로는 한(寒) 난동월(暖冬月)을 구분하기가 어려운 것으로 밝혀지고 있다. 지상 기압에 있어서는 한동월이 난동월에 비해 서고동저(西高東底)의 기압배치가 강하게 나타나고 있다. 향후 동계 전월에 관해 850hPa면의 분석 등을 추가한 좀 더 포괄적인 연구를 하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.33-35
• /
• 1988

From the study of mechanism of electrical conduction of film which is made from Polyethylene Terephthalate at very high temperature which is larger than low electric field and glass transition point, we find that there is a extraordinary non ohmic region (I∝V$^n$, 0

• 한국응용곤충학회지
• /
• 제4권
• /
• pp.7-10
• /
• 1965

In an experiment to evaluate the various aspects of symptom of witches' broom of jujube tree with two different kinds of scions, taken from diseased plant and stem- grafted upon sound stocks-one cut before wintering(stored in cellar), the other after wintering, it was observed that the disease rate of those cut before wintering(Nov.) was $\98\%$ whereas those cut after wintering(March) showed much lower rate, $3\%$ initially and gradually increased up to $39\%$. In another experiment of diseased bud grafted into healthy seedling, the finding made in the following year was that 14 stocks(only one of which salt union by callusing) were infected out of the given 23- in the initial stage only 4, yet gradually increased to the number of 14. The shoots from the ground portion of the diseased stock were in general more quickly subjected to the disease than the others. Under natural condition, the diseased trees develop at first seemingly the same leaves as healthy ones; it is not until the branches and loaves grow to a considerable degree that the symptom appears. Once appearing, tile disease grows and the symptom continues to appear as late as in Sept. and early Oct., causing tile plant to develop the extraordinary branches and leaves of extremely reduced size, the typical symptom of witches' broom. Such phenomenon can be observed in the experiments of the foregoing paragraphs. And the suckers and roots of diseased plant are bound to be infected, it was found out with no exception. Viewing from the results of the above experiments and observation, it is believed that the low temperature during winter causes the virus in the above-ground portion of diseased plant to diminish or inactivated, and subsequently the virus in the roots moves up or multiply in the sprouting season.

• 상하수도학회지
• /
• 제17권4호
• /
• pp.487-494
• /
• 2003

In this research, water qualities of river water and bank-filtrate were compared for six months including winter season. The location studied was Galjon area, the downstream of the Nakdong river. The well for bank-filtrate was installed 40 m apart from riverside. Main analytic results of bank-filtrate and river water were summarized as followings; the average concentrations in bank-filtrate were turbidity 0.8NTU, TN 0.4mg/l, $BOD_5$, 0.1mg/l, $KMnO_4$ consumption 1.6mg/l, heterotrophic bacteria 350cfu/ml, Fe 0.5mg/l, Mn 0.99mg/l while the average concentrations in river water were turbidity 6.1NTU, TN 3.9mg/l, $BOD_5$, 3.6mg/l, $KMnO_4$ consumption 11mg/l, heterotrophic bacteria 1,640cfu/ml, Fe 0.28mg/l, Mn 0.04mg/l. Water quality of bank-filtrate was mostly shown a good results than it of river water excepting Fe and Mn. In even basic constituents such as water temperature and pH, bank-filtrate was very settled while river water was extraordinary changable and high. In case of nitrogen, especially, total nitrogen of river water was 3.9mg/l while it of bank-filtrate was 0.4mg/l and its reduction was very high. The reason is that $NH^+_4-N$ among total nitrogen in the river water is nitrified and then denitrified in soil layer when it is pumped up as bank-filtrate. But Fe and Mn caused by the characteristics of soil was very high in bank-filtrate while Mn in river water was particularly very low and settled. As the distance between riverside and well was longer, concentration of Fe and Mn may be went up while its bacteria may be reduced.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.412-412
• /
• 2009

Carbon-based nano materials have a significant effect on various fields such as physics, chemistry and material science. Therefore carbon nano materials have been investigated by many scientists and engineers. Especially, since graphene, 2-dimemsonal carbon nanostructure, was experimentally discovered graphene has been tremendously attracted by both theoretical and experimental groups due to their extraordinary electrical, chemical and mechanical properties. Electrical conductivity of graphene is about ten times to that of silicon-based material and independent of temperature. At the same time silicon-based semiconductors encountered to limitation in size reduction, graphene is a strong candidate substituting for silicon-based semiconductor. But there are many limitations on fabricating large-scale graphene sheets (GS) without any defect and controlling chirality of edges. Many scientists applied micromechanical cleavage method from graphite and a SiC decomposition method to the fabrication of GS. However these methods are on the basic stage and have many drawbacks. Thereupon, our group fabricated GS through Thermo-electrical Pulse Induced Evaporation (TPIE) motivated by arc-discharge and field ion microscopy. This method is based on interaction of electrical pulse evaporation and thermal evaporation and is useful to produce not only graphene but also various carbon-based nanostructures with feeble pulse and at low temperature. On fabricating GS procedure, we could recognize distinguishable conditions (electrical pulse, temperature, etc.) to form a variety of carbon nanostructures. In this presentation, we will show the structural properties of OS by synthesized TPIE. Transmission Electron Microscopy (TEM) and Optical Microscopy (OM) observations were performed to view structural characteristics such as crystallinity. Moreover, we confirmed number of layers of GS by Atomic Force Microscopy (AFM) and Raman spectroscopy. Also, we used a probe station, in order to measure the electrical properties such as sheet resistance, resistivity, mobility of OS. We believe our method (TPIE) is a powerful bottom-up approach to synthesize and modify carbon-based nanostructures.