• 제목/요약/키워드: Extraction Process

검색결과 2,471건 처리시간 0.033초

황산바나듐 모의용액으로부터 Alamine336에 의한 바나듐 용매추출의 최적조건 연구 (The Optimum Condition Analysis of Vanadium Solvent Extraction by Alamine336 from the Synthetic Vanadium Sulfate Solution.)

  • 안종관;안재우
    • 대한금속재료학회지
    • /
    • 제46권12호
    • /
    • pp.823-829
    • /
    • 2008
  • The solvent extraction process for the recovery of vanadium from leaching solution of SCR(selective catalytic reduction) spent catalyst was investigated by using Alamine336 as an extractant. The effects of experimental conditions, such as initial pH and concentration of sulfate ion, and ammonia concentration of stripping solution were studied. The extraction percentage of vanadium were increased with the increase of initial pH of leaching solution and decreased with the increase of sulfate ion. More than 99% of vanadium in leaching solution were extracted and stripped at the A/O ratio of 1.0 in 2 stages. On the basis of these results, an optimum solvent extraction process which vanadium was effectively recovered from SCR spent catalyst was proposed.

Effect of Puffing in the Extraction of Active Ingredients from the Roots of Paeonia lactiflora and Astragalus membranaceus

  • Lee, Hyojin;Jang, Kyoung Won
    • Natural Product Sciences
    • /
    • 제28권2호
    • /
    • pp.89-92
    • /
    • 2022
  • In Asia, the roots of Paeonia lactiflora and Astragalus membranaceus have been used as therapeutic agents for thousands of years. Once the medicinal plants are harvested, they are dried and their ingredients are extracted by heat-mediated reflux extraction. However, the condensed structure of organic products (especially roots) limits the extraction of bioactive components. In this study, we assessed the effect of the puffing method (using high temperature and pressure) before the extraction process in relation to the profile and antioxidant capacity of active ingredients. We demonstrated that the additional puffing process before extraction methods improves the yield of polyphenol concentrations and antioxidant activities from the roots of P. lactiflora and A. membranaceus.

고로쇠와 우산고로쇠 저온고압 수용성 추출물의 유용생리활성 비교 (Comparison of Biological Activities of Acer mono and A. okamotoanum Extracts by Water Extracton and Low Temperature High Pressure Extraction)

  • 정명훈;하지혜;오성호;김승섭;이학주;강하영;이현용
    • 한국약용작물학회지
    • /
    • 제17권6호
    • /
    • pp.407-411
    • /
    • 2009
  • Hepatoprotective and antioxidant activities of Acer mono and A. okamotoanum were compared after being extracted by low temperature and high pressure (LTHP) at 20 MPa and $60^{\circ}C$ for 15 minutes. Extraction yield of both A. mono and A. okamotoanum was increased about 40~43% by this extraction process. On scavenging activities, the bark of A. okamotoanum from this extraction process showed the highest activity as about 97%. This value was higher than that from conventional water extraction and A. mono extracts. Both of A. mono and A. okamotoanum showed high ability on nitrite scavenging, but decreasing tendency according to increasing of pH. On SOD-like test, A. okamotoanum had the highest activity as 46.28% at $1.0\;mg/m{\ell}$ concentration. A. okamotoanum extracted by LTHP also showed the highest activity as 197.38% in adding $1.0\;mg/m{\ell}$ concentration. Generally, the extracts from low temperature and high pressure extraction process are higher hepatoprotective and antioxidant activities than that from conventional water extraction. It can conclude that the bark of A. okamotoanum has better biological activities than other parts of A. mono.

중심합성계획모델을 이용한 밀싹으로부터 플라보노이드성분의 추출공정 최적화 (Optimization of Total Flavonoids Extraction Process from Wheat Sprout using Central Composite Design Model)

  • 이승범;왕효정;유봉호
    • 공업화학
    • /
    • 제29권4호
    • /
    • pp.446-451
    • /
    • 2018
  • 플라보노이드성분 함량이 높은 밀싹을 이용하여 유효성분을 추출하고, 중심합성계획모델을 이용하여 추출공정을 최적화하였다. 중심합성계획모델의 반응치로는 추출수율과 플라보노이드성분 함량을 설정하고, 독립변수인 추출시간, 주정/초순수 부피비, 추출온도에 따른 주효과도와 교호효과도를 해석하였다. 추출수율의 경우 추출시간과 추출온도가 상대적으로 큰 영향을 미쳤으며, 플라보노이드성분 함량의 경우에는 추출시간의 영향이 가장 크게 나타났다. 추출수율과 플라보노이드성분 함량을 모두 고려한 결과 최적추출조건은 추출시간(2.44 h), 주정/초순수의 부피비(50.00 vol%), 추출온도($54.41^{\circ}C$)이었으며, 이때 추출수율은 30.14 wt%, 플라보노이드성분 함량은 $35.37{\mu}g\;QE/mL\;dw$이었다. 이 조건의 실제 실험결과 추출수율(29.92 wt%), 플라보노이드성분 함량($35.32{\mu}g\;QE/mL\;dw$)으로 오차율은 각각 0.39%, 0.74%이었다. 이는 두 개의 반응치를 동시에 분석하는 다중분석 종합분석임에도 높은 정확도를 나타낸 것으로 본 연구에서의 최적화과정 신뢰도가 우수한 것으로 사료된다.

초고압 처리에 의한 감귤의 추출률 및 특성변화 (Quality Characteristics of Citrus Fruit by Cyclic Low Pressure Drying and High Hydrostatic Pressure Extraction)

  • 박성진;최영범;고정림;나영아;이현용
    • 한국조리학회지
    • /
    • 제20권3호
    • /
    • pp.13-21
    • /
    • 2014
  • 본 연구에서는 순환형 감압건조 및 초고압 추출공정을 이용하여 전통적인 기존 추출공정과 비교함으로써 복합 추출공정에 의한 감귤의 항산화 활성 증진을 확인하고자 연구를 수행하였다. 건조공정을 거친 후 초고압 처리 추출물의 수율이 20.41~28.19%로 높은 추출 수율을 나타내어 건조전 열수추출공정(17.21%)과 비교하여 약 1.6배의 높은 추출수율을 나타내었다. 순환형 감압건조와 초고압 공정을 병행하였을 시 총 폴리페놀과 플라보노이드 함량이 순환형 감압건조공정을 거치지 않은 것보다 다소 증가되는 것으로 보아 활성성분의 용출이 증진된 것으로 보인다. DPPH radical 소거 활성은 15분 초고압 처리한 추출물이 48.21%로 높은 활성을 나타내었다. 전처리 공정에 따른 감귤 시료의 주사전자현미경(SEM)을 통해 순환형 감압건조 후 초고압 추출이 감귤 내부 조직까지 영향을 주어 세포벽이 깨어지면서 조직 및 구조가 변화한 것으로 판단되며, 이를 통해 수율 및 활성 성분의 용출 증가가 이루어 진 것으로 사료된다. 따라서, 감귤의 건조 및 초고압 추출공정의 최적화를 통한 활성물질의 추출 극대화를 통해 추출수율을 향상시킬 것으로 판단된다.

Cyanex 572를 사용하여 [Pr, Nd, Sm]/[La]분리에 대한 향류추출공정 설계 (Design of Counter current Extraction Process for the Separation of [Pr, Nd, Sm]/[La] using Cyanex 572)

  • 이주은;소홍일;장인환;안재우;김홍인;이진영
    • 자원리싸이클링
    • /
    • 제27권4호
    • /
    • pp.50-56
    • /
    • 2018
  • 추출제로 Cyanex 572를 사용하여 혼합 용액에서 [Pr, Nd, Sm]그룹과 [La]을 분리하기 위하여 Xu Guangxian이 제시한 이론에 의하여 향류추출 공정의 최적 추출 공정 변수를 계산하고자 하였다. 기초실험으로부터 두 그룹의 최적 분리계수는 추출 공정의 경우 16.80, 세정공정에서는 21.48 이었고, 1.0 M Cyanex 572에 의한 희토류 성분의 추출용량은 0.12 M 이었다. 공정 개발에 필요한 추출 단수, 세정 단수, 유량비 등에 대하여 최적 추출비 이론에 의해 계산하였다. 계산 결과 두 그룹의 희토류 분리에 필요한 단수는 추출 7단 및 세정 4단이며, 원료용액, 추출용액 및 세정용액의 유량비는 25 : 5.67 : 12.27 이었다.

Application of the Microwave-assisted Process to the Fast Extraction of Isoflavone from the Waste Residue of the Soybeans

  • Hua, Li;Guoqin, Hu;Dan, Li
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권11호
    • /
    • pp.2687-2690
    • /
    • 2009
  • Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

발치 후 젤라틴 스폰지와 혈소판 농축 혈장이 치조제 보존 및 골 형성에 미치는 영향 (EFFECT OF GELATIN SPONGY AND PLATELET RICH PLASMA ON RIDGE PRESERVATION AND BONE FORMATION AFTER EXTRACTION)

  • 김영석;권경환;차수련;민승기
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제27권3호
    • /
    • pp.238-247
    • /
    • 2005
  • The placement of different graft materials and/or the use of occlusive membranes to cover the extraction socket entrance are techniques aimed at reducing alveolar ridge resorption and enhancing bone formation. However, in spite of its clinical advantage, the use of graft materials in fresh extraction socket has been questioned because particles of the grafted material have been found in alveolar sockets with fibrous union. The purposes of this study were to evaluate whether alveolar ridge resorption following tooth extraction could be reduced and bone formation could be enhanced by the application of absorbable gelatin spongy or gelatin spongy soaked with platelet rich plasma(PRP) used as a space filler in clinical and radiographic aspects. Eighty patients who were scheduled for extraction of both third molars were participated and carried out by one experienced surgeon. Following extraction of teeth, one extracted socket were treated with gelatin spongy as an experimental group A and the other were treated with gelatin spongy and PRP as an experimental group B. The routine extracted socket were healed without any treatment as a control group. From the period of extraction to 12 weeks postoperatively, we examined the clinical course and radiographic evaluation on socket at regular interval. Both experimental groups showed faster wound healing process than control clinically. Vertical gingival height of the extraction socket were less changed statistically in both experimental groups than control. The horizontal width change of the extraction socket were not significant statistically in any group. Radiographic changes of the alveolar bone height were less changed in both experimental groups and bone density were showed higher than control. There were a little difference between experimental group A and B. In conclusion, absorbable gelatin sponge and with PRP were considered as having preservation effects of extraction socket and stimulation of bone formation process after extraction.

식물세포배양으로부터 Paclitaxel 분리를 위한 액-액 추출 조건의 최적화 (Optimization of liquid-liquid extraction conditions for paclitaxel separation from plant cell cultures)

  • 김진현
    • KSBB Journal
    • /
    • 제24권2호
    • /
    • pp.212-215
    • /
    • 2009
  • 본 연구에서는 식물세포배양으로부터 항암물질 paclitaxel을 고 순도, 고 수율로 분리 가능한 액-액 추출 공정에서의 주요 공정 변수들을 최적화 하였다. 액-액 추출을 위한 최적의 유기용매 (methylene chloride) 첨가량, 추출횟수, 혼합시간, 정체시간은 각각 0.28 (v/v), 3 (times), 30 min, and 40 min 임을 알 수 있었다. 액-액 추출 공정은 특히 메탄올을 이용한 biomass 추출물에 포함되어 있는 다량의 극성불순물을 제거하는데 매우 효과적이었다. 또한 액-액 추출 후 농축조건으로는 후속공정에서의 높은 순도의 paclitaxel 뿐만 아니라 작업의 용이성 측면에서 액-액 추출액을 rotary evaporator로 완전히 농축하는 것이 가장 바람직함을 알 수 있었다.

Batch and dynamic study of lactic acid extraction using emulsion liquid membrane

  • Berrama, Tarek;Pareau, Dominique;Durand, Gerard
    • Membrane and Water Treatment
    • /
    • 제6권4호
    • /
    • pp.277-292
    • /
    • 2015
  • The extraction of lactic acid by an emulsion liquid membrane (ELM), in batch and continuous mode, has been reported. On the basis of preliminary experiments, the optimum composition of the organic phase (membrane) is determined. When the SPan 80 is used as surfactant, the emulsion breakage exceeds 50%, but only 10% is obtained when the ECA4360 is used. The effects of surfactant, carrier and solute concentrations, phase volume ratio, and stirring speed on the extraction yield were examined and optimized. Surfactant, carrier and diluent used were ECA4360, trilaurylamine (TLA) and dodecane, respectively; 2-ethylhexane-1,3-diol (EHD) is used as a co-surfactant. Under optimal conditions, emulsion breaking is very low and the swelling is kept at its lowest level. Under the pH conditions of fermentation medium, the extraction yield is lower. A mixer-settler continuous system was used for testing these conditions. The residence time, the number of extraction stages and the stability of the emulsion were studied and optimized. The extraction yield obtained exceeds 90%.