• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.823-829
• /
• 2008

The solvent extraction process for the recovery of vanadium from leaching solution of SCR(selective catalytic reduction) spent catalyst was investigated by using Alamine336 as an extractant. The effects of experimental conditions, such as initial pH and concentration of sulfate ion, and ammonia concentration of stripping solution were studied. The extraction percentage of vanadium were increased with the increase of initial pH of leaching solution and decreased with the increase of sulfate ion. More than 99% of vanadium in leaching solution were extracted and stripped at the A/O ratio of 1.0 in 2 stages. On the basis of these results, an optimum solvent extraction process which vanadium was effectively recovered from SCR spent catalyst was proposed.

• Natural Product Sciences
• /
• v.28 no.2
• /
• pp.89-92
• /
• 2022

In Asia, the roots of Paeonia lactiflora and Astragalus membranaceus have been used as therapeutic agents for thousands of years. Once the medicinal plants are harvested, they are dried and their ingredients are extracted by heat-mediated reflux extraction. However, the condensed structure of organic products (especially roots) limits the extraction of bioactive components. In this study, we assessed the effect of the puffing method (using high temperature and pressure) before the extraction process in relation to the profile and antioxidant capacity of active ingredients. We demonstrated that the additional puffing process before extraction methods improves the yield of polyphenol concentrations and antioxidant activities from the roots of P. lactiflora and A. membranaceus.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.407-411
• /
• 2009

Hepatoprotective and antioxidant activities of Acer mono and A. okamotoanum were compared after being extracted by low temperature and high pressure (LTHP) at 20 MPa and $60^{\circ}C$ for 15 minutes. Extraction yield of both A. mono and A. okamotoanum was increased about 40~43% by this extraction process. On scavenging activities, the bark of A. okamotoanum from this extraction process showed the highest activity as about 97%. This value was higher than that from conventional water extraction and A. mono extracts. Both of A. mono and A. okamotoanum showed high ability on nitrite scavenging, but decreasing tendency according to increasing of pH. On SOD-like test, A. okamotoanum had the highest activity as 46.28% at $1.0\;mg/m{\ell}$ concentration. A. okamotoanum extracted by LTHP also showed the highest activity as 197.38% in adding $1.0\;mg/m{\ell}$ concentration. Generally, the extracts from low temperature and high pressure extraction process are higher hepatoprotective and antioxidant activities than that from conventional water extraction. It can conclude that the bark of A. okamotoanum has better biological activities than other parts of A. mono.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.446-451
• /
• 2018

Effective ingredients were extracted using wheat sprout with high levels of flavonoids, and the extraction process was optimized with a central composite design model. The response value of the central composite design model establishes the extraction yield and the content of the flavonoids. The main and interactive effects were then analyzed depending on independent variables such as the extraction time, the volume ratio of alcohol to ultrapure water, and the extraction temperature. The extraction time and temperature were relatively large for the extraction yield. For the total flavonoids, the extraction time was most significantly affected. Considering both the extraction yield and the content of the total flavonoids, optimal extraction conditions were as follows: the extraction time (2.44 h), volume ratio of alcohol to ultrapure water (50.00 vol%), extraction temperature ($54.41^{\circ}C$). Under these condition, the extraction yield was 30.14 wt% and the content of the total flavonoids was $35.37{\mu}g\;QE/mL\;dw$. From the actual experimental result, the extraction yield under this condition was 29.92 wt% and the content of the total flavonoids was $35.32{\mu}g\;QE/mL\;dw$, which had an error rate of 0.39% and 0.74%, respectively. This is a multi-analysis comprehensive analysis that analyzes two simultaneous values of responses, but is considered to be highly accurate and also provides an excellent reliability of the optimization process in this study.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.13-21
• /
• 2014

We developed a method for improving the antioxidant activities of Citrus extracts through cyclic low pressure drying(CLPD) and a high hydrostatic pressure extraction (HPE) process. Citrus fruits were prepared for water extraction at $60^{\circ}C$ and 300 MPa for 5 min (high hydrostatic pressure extraction, HPE5) and 15 min (high hydrostatic pressure extraction, HPE15) after cyclic low pressure drying method. Extraction yields obtained by cyclic low pressure drying and high hydrostatic pressure extraction process were 20.41, 23.47, and 28.19%, respectively. Total polyphenol contents were increased by combined process. Generally, CLPD and HPE resulted in higher yields than the conventional extraction process. Further, HPE15 showed 48.21% DPPH radical scavenging activity (EDA, %) at $1,000{\mu}g/mL$. In general, antioxidant activities of Citrus increased by CLPD and HPE. Therfore, CLPD and HPE of Citrus resulted in higher antioxidant activity than conventional water extraction.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.50-56
• /
• 2018

For the purpose of optimizing the counter current extraction process for separation of [Pr, Nd, Sm] group and [La] in mixed solution using Cyanex 572 as an extractant, the theory of Xu Guangxian was derived for calculating the optimized extraction factors. From the basic batch test result, the separation factor was 16.80 at extraction process and 21.48 at scrubbing process, and the loading capacity of 1.0 M Cyanex 572 was 0.12 M of rare earth element. The process parameters such as the stage number at extraction and scrubbing process, the flow rate ratio of feed and solvent solution can be calculated using an equation of optimum extraction ratio proposed by Xu Guangxian. From the result of calculation, 7 extraction stages and 4 scrubbing stages were required for rare earth separation, and the flow rate ratio of feed solution, solvent solution, scrubbing solution was 25 : 5.67 : 12.27.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2687-2690
• /
• 2009

Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.238-247
• /
• 2005

The placement of different graft materials and/or the use of occlusive membranes to cover the extraction socket entrance are techniques aimed at reducing alveolar ridge resorption and enhancing bone formation. However, in spite of its clinical advantage, the use of graft materials in fresh extraction socket has been questioned because particles of the grafted material have been found in alveolar sockets with fibrous union. The purposes of this study were to evaluate whether alveolar ridge resorption following tooth extraction could be reduced and bone formation could be enhanced by the application of absorbable gelatin spongy or gelatin spongy soaked with platelet rich plasma(PRP) used as a space filler in clinical and radiographic aspects. Eighty patients who were scheduled for extraction of both third molars were participated and carried out by one experienced surgeon. Following extraction of teeth, one extracted socket were treated with gelatin spongy as an experimental group A and the other were treated with gelatin spongy and PRP as an experimental group B. The routine extracted socket were healed without any treatment as a control group. From the period of extraction to 12 weeks postoperatively, we examined the clinical course and radiographic evaluation on socket at regular interval. Both experimental groups showed faster wound healing process than control clinically. Vertical gingival height of the extraction socket were less changed statistically in both experimental groups than control. The horizontal width change of the extraction socket were not significant statistically in any group. Radiographic changes of the alveolar bone height were less changed in both experimental groups and bone density were showed higher than control. There were a little difference between experimental group A and B. In conclusion, absorbable gelatin sponge and with PRP were considered as having preservation effects of extraction socket and stimulation of bone formation process after extraction.

• KSBB Journal
• /
• v.24 no.2
• /
• pp.212-215
• /
• 2009

In this study, the process parameters of liquid-liquid extraction were optimized to obtain a high purity and yield of paclitaxel in a pre-purification step. The optimal solvent ratio (methylene chloride/concentrated methanol extract ratio), extraction times, mixing time, and standing time for liquid-liquid extraction were 0.28 (v/v), 3(times), 30 min, and 40 min, respectively. The polar impurities from the biomass extraction were efficiently removed by liquid-liquid extraction. The complete concentration of liquid-liquid extract by rotary evaporator was reliable enough to obtain a high purity and yield of paclitaxel for subsequent purification steps.

• Membrane and Water Treatment
• /
• v.6 no.4
• /
• pp.277-292
• /
• 2015

The extraction of lactic acid by an emulsion liquid membrane (ELM), in batch and continuous mode, has been reported. On the basis of preliminary experiments, the optimum composition of the organic phase (membrane) is determined. When the SPan 80 is used as surfactant, the emulsion breakage exceeds 50%, but only 10% is obtained when the ECA4360 is used. The effects of surfactant, carrier and solute concentrations, phase volume ratio, and stirring speed on the extraction yield were examined and optimized. Surfactant, carrier and diluent used were ECA4360, trilaurylamine (TLA) and dodecane, respectively; 2-ethylhexane-1,3-diol (EHD) is used as a co-surfactant. Under optimal conditions, emulsion breaking is very low and the swelling is kept at its lowest level. Under the pH conditions of fermentation medium, the extraction yield is lower. A mixer-settler continuous system was used for testing these conditions. The residence time, the number of extraction stages and the stability of the emulsion were studied and optimized. The extraction yield obtained exceeds 90%.