• 정보관리학회지
• /
• 제26권1호
• /
• pp.305-320
• /
• 2009

웹을 통해 제공되는 뉴스 페이지의 경우 필요한 정보 뿐 아니라 많은 불필요한 정보를 담고 있다. 이러한 불필요한 정보는 뉴스를 처리하는 시스템의 성능 저하와 비효율성을 가져온다. 이 연구에서는 웹 페이지로부터 뉴스 콘텐츠를 추출하기 위해 문장과 블록에 기반한 뉴스 기사 추출 방법을 제시하였다. 또한 이들을 결합하여 최적의 성능을 가져올 수 있는 방안을 모색하였다. 실험 결과, 웹 페이지에 대해 하이퍼링크 텍스트를 제거한 후 문장을 이용한 추출 방법을 적용하였을 때 효과적이었으며, 여기에 블록을 이용한 추출 방법과 결합하였을 때 더 좋은 결과를 가져왔다. 문장을 이용한 추출 방법은 추출 재현율을 높여주는 효과가 있는 것으로 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2108-2111
• /
• 2003

This paper introduces a new local feature extraction method and image matching method for the localization and classification of targets. Proposed method is based on the block-by-block projection associated with directional pattern of blocks. Each pattern has its own eigen-vertors called as CEBs(Classified Eigen-Blocks). Also proposed block-based image matching method is robust to translation and occlusion. Performance of proposed feature extraction and matching method is verified by the face localization and FLIR-vehicle-image classification test.

• Journal of Ginseng Research
• /
• 제22권3호
• /
• pp.155-160
• /
• 1998

This stuffy was carried to establish a new efficient method for the preparation of edible crude ginseng saponin. The conventional butanol extraction and resin adsorption methods were compared for the contents of total crude ginseng saponin and major ginsenosides. Seventy- percent methanol extract was applied to Diaion HP-20 column and the resin was washed with Hn and eluted with absolute methanol. The methanol elute was dried in vivo and analyzed for its ginsenosides. Use of ethanol instead of methanol to make edible crude ginseng saponin gave a similar result. Butanol extraction was performed by the conventional method. The final aqueous layer from butanol extraction was passed through Diaion HP-20 column followed by elution with methanol and Diaion HP-20 passed fraction was extracted with butanol to recover remaining components, respectively, in order to determine saponin loss. TLC and HPLC qualitatively and quantitatively monitored Ginsenosides, respectively. Loss of ginsenosides was higher in butanol extraction method than in Diction HP-20 adsorption method. In addition, saponin fractions prepared by Diction HP-20 adsorption method showed higher content of each ginsenoside, showing 8.2% higher purity than that of butanol extracted fraction. From these results, we propose the resin adsorption method as a new efficient measure for the preparation of crude ginseng saponin, which is edible by using spirit instead of methanol.

• 한국식품위생안전성학회지
• /
• 제26권1호
• /
• pp.70-75
• /
• 2011

본 연구에서는 새로운 제형 클로렐라제품의 정확한 총 엽록소 정량시험법을 마련하기 위해 새로운 제형 중 Syrup과 Candy 두 가지 제형의 제품을 마련하여 현행 공전방법을 적용한 함량 비교시험을 하였고 보다 정확한 결과 값을 나타낸 제1법인 pyridine 추출법의 전 처리방법을 개선하기 위하여 alkari성 pyridine으로 시료에서 엽록소를 추출하기 위하여 30분간 방치하고, 15분간 가온 할 때 초음파 처리를 병행하는 방법을 개발하여 그 결과 값의 정확성, 정밀성을 검토하였고 또 matrix sparking에 의한 정밀성과 재현성을 검토하였다. 그 결과 액상제품의 경우 pyridin 추출법과 acetone 추출법의 결과 값 CV는 18.82와 40.00, 이론치에 대한 결과 값이 106.3%와 78.1%로 상당한 차이를 보였다. Pyridin 추출법과 pyridin 추출법에 초음파 전 처리를 추가한 결과는 $27.2{\pm}5.12\;mg$/100 g와 $25.0{\pm}2.84\;mg$/100 g로 표준편차가 상당히 줄어들었고 CV도 18.82에서 11.36으로 상당히 줄어들었다. 이론치 대비율도 106.3%와 97.7%로 pyridin-초음파 추출방법이 보다 이론치에 근접한 것으로 나타났으며 회수율 측정을 하기 위하여 pyridin-초음파 추출법에 matrix spiking 한 결과도 표준편차, CV값과 이론치 대비율이 모두 향상된 결과를 나타내었다. 고형제품의 경우도 pyridin 추출법과 acetone 추출법의 결과 값 CV는 7.05와 30.00, 이론치에 대한 결과 값이 62.7%와 40%로 상당한 차이를 보였다. Pyridin 추출법과 pyridin 추출법에 초음파 전처리를 추가한 결과는 $62.7{\pm}4.42\;mg$/100 g와 $99.4{\pm}4.06\;mg$/100 g로 표준편차가 상당히 줄어들었고 CV값도 7.05에서 4.08로 상당히 줄어들었다. 이론치 대비율도 62.7%에서 99.4%로 pyridin-초음파 추출법이 명확하게 이론치에 근접한 것으로 나타났으며 회수율 측정을 하기 위하여 pyridin-초음파 추출법에 matrix spiking 한 결과도 표준편차, CV값과 이론치 대비율 모두 향상된 결괴를 나타내었다.

• 대한의생명과학회지
• /
• 제15권3호
• /
• pp.229-232
• /
• 2009

DNA isolation for PCR-based short tandem repeat (STR) analysis is essential to recover high yields of amplifiable DNA from low copy number (LCN) DNA samples. There are different methods developed for DNA extraction from the small bloodstain and gloves, commonly found at crime scenes. In order to obtain STR profiles from LCN DNA samples, DNA extraction protocols, namely the automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ method, the automated $QIAcube^{TM}$ method, the automated $Maxwell^{(R)}$ 16 DNA $IQ^{TM}$ Resin method, and the manual $QIAamp^{(R)}$ DNA Micro Kit method, were evaluated. Extracted DNA was quantified by the $Quantifiler^{TM}$ Human DNA Quantification Kit and DNA profiled by $AmpFISTR^{(R)}$ $Identifiler^{(R)}$ Kit. Results were compared based on the amount of DNA obtained and the completeness of the STR profiles produced. The automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ and $QIAcube^{TM}$ methoas produced reproducible DNA of sufficient quantity and quality trom the dried blood spot. This two automated methods showed a quantity and quality comparable to those of the forensic manual standard protocols normally used in our laboratory. In our hands, the automated DNA extraction method is another obvious choice when the forensic case sample available is bloodstain. The findings of this study indicate that the manual simple modified $QIAamp^{(R)}$ DNA Micro Kit method is best method to recover high yields of amplifiable DNA from the numerous potential sources of LCN DNA samples.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.549-563
• /
• 2005

The study was carried out to develop and standardize the analytical method of 1,4-dioxane in water. The National Institute of Environmental Research in Korea has monitored for 1,4-dioxane in water since 1998 and it has been detected in environmental water occasionally. But the environmental pollution and analytical method in water is not well known over the world. The trace analytical method at low-${\mu}/L$ level is prerequisite in order to evaluate the residue of 1,4-dioxane in water. Evaluation of the method was demonstrated by comparing and analyzing with liquid-liquid extraction, solid-phase extraction and purge & trap technique. As a result of experiment by standard solutions and raw samples, the precision and accuracy for three methods were obtained within error rate of about 10%. Therefore, three methods were standardized as official monitoring method in Korea. Also, a convenient and simple liquid-liquid extraction method for the analysis of 1,4-dioxane in water was developed by combined with gas chromatography/mass spectrometry and applied to the water samples in Korea

• 정보관리학회지
• /
• 제21권3호
• /
• pp.289-303
• /
• 2004

이 연구에서는 이용자가 여러 곳에 분산되어 있는 문서들을 일일이 보지 않고 하나의 요약문에서 쉽게 질의에 맞는 답을 찾을 수 있는 가장 효율적인 방안을 제시하고자 하였다. 이를 위해, 클러스터링 기법, 단락확장 기법, 두 기법의 특성을 반영한 혼합 기법 등 세 가지 복수문서 요약 기법의 성능을 평가하는 실험을 수행하였다. 요약기법 평가 기준으로는 요약 정확률과 요약문내 정보 중복도를 적용하였다. 실험결과 이용자 질의에 따라 여러 문서를 요약하는 최적 기법으로 문장검색을 기반으로 한 순차적 단락확장 기법을 제안하였다. 순차적 단락확장은 특히, 용약의 대상이 되는 문서가 대용량인 환경에서 정확한 정보를 찾아 요약문을 생성하는 성능이 가장 우수한 것으로 나타났다.

• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.786-791
• /
• 2006

Three solvent extraction techniques were used to recover waxy tractions from grain sorghum kernels. Yield and chemical composition of the waxy tractions obtained by reflux, bench scale (recirculated solvent), and countercurrent extraction methods were compared. Waxy traction yield from countercurrent extraction (0.200%) was significantly greater (p<0.05) than the yields of wax from both reflux (0.184%) and bench-scale (0.179%) methods. The waxy traction extracted using the bench-scale method showed the greatest relative amount of long-chained (primarily C:28 and C:30) alcohols while the countercurrent-extracted wax showed the greatest relative amount of long-chained fatty acids and fatty aldehydes. Countercurrent extraction removed a higher additive percentage of fatty aldehydes, acids, and alcohols than reflux or bench-scale extraction method.

• 한국멀티미디어학회논문지
• /
• 제20권5호
• /
• pp.740-747
• /
• 2017

A fast cell contour extraction method using CUDA parallel processing technique is presented. The cell contour extraction is one of important processes to analyze cell information in pathology. However, conventional sequential contour extraction methods are slow for a huge high-resolution medical image, so they are not adequate to use in the field. We developed a parallel morphology operation algorithm to extract cell contour more quickly. The algorithm can create an inner contour and fail to extract the contour from the concave part of the cell. We solved these problems by subdividing the contour extraction process into four steps: morphology operation, labeling, positioning and contour extraction. Experimental results show that the proposed method is four times faster than the conventional one.

• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.