• Journal of Environmental Science International
• /
• v.13 no.12
• /
• pp.1139-1144
• /
• 2004

We studied a extraction and degradation of alginate from seaweed-stems using microorganism DS-02. DS-02 has a maximum growth rate at $30^{\circ}C$ and the enzyme has a maximum activity of alginate extraction at $35^{\circ}C.$ The yield of alginate extraction using DS-02 is about $16.0{\%}$ for 3.0 hour and molecular weight of the alginate decreased to about 1/8 of initial value after 24 hour extraction. Alginate extraction method by DS-02, compared with general alkali-extraction method, has an advantage of decreasing the molecular weight of alginate during extraction.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.257-260
• /
• 2005

This paper discusses a human body extraction method for mobile robot system. The skeleton features are used to analyze human motion and pose estimation. The intelligent robot system requires more robust silhouette extraction method because it has internal vibration and low resolution. The new hybrid silhouette extraction method is proposed to overcome this constrained environment. Finally, the experimental results show the superiority of the Proposed method.

• Journal of Ginseng Research
• /
• v.8 no.1
• /
• pp.32-37
• /
• 1984

In order to shorten the extraction time of saponin in ginseng products, election with Extrelut column and phase-separation methods were compared. The results obtained are as follows. 1. Saponin of ginseng products was extracted completely within 3 hours by election method with Extrelut column, and the rate of removing glucose by the column was increased with increasing glucose content in ginseng products. 2. Stirring method was superior to refluxing method for removing sugars from ginseng products, and removing rate was deceased in the order of lactose, sucrose and glucose. 3. Extraction rate of ginsenoside from ginseng extracts by the elution method was nearly same as that of phase-separation method; however, the former was much higher than the latter in the case of ginseng teas. Therefore, the elution by Extrelut column is to be improper for extraction of saponin in ginseng tea which contains much sugar. It was necessary to remove lipophilic compounds for extraction of saponin from ginseng extracts by elution with Extrelut column.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.433-437
• /
• 2001

The extraction of panaxynol and panaxydol from Korean ginseng was found to be op-timal at 55$^{\circ}C$ for the shaking method, 80$^{\circ}C$ for the soxhlet method, and 65$^{\circ}C$ for the supercritical extraction method. The amount of extracted panaxydol and panaxynol, and their increased over a period of 12 h with the shaking method. The soxhlet method produced an extract with the largest panaxydol/panaxynol ratio. A reduced particle size enhanced extraction, however the ration of panaxydol/panaxynol decreased. Swelling in water was found to be detrimental for the extrac-tion of panaxydol and panaxynol.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.643-644
• /
• 2008

Various researches on 3D silhouette extraction have been performed in the area of computer graphic. This paper presents a new method for internal pattern extraction by using an arbitrary region silhouette control technique. The proposed method was tested by using 3D data of stone pagodas. The results show that the proposed method particularly improves the performance of internal pattern extraction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.404-406
• /
• 2002

In this paper, the method of image feature extraction is proposed. This method employ the energy field analysis, outlier removal algorithm and ring projection. Using this algorithm, we achieve rotation-translation-scale invariant feature extraction. The force field are exploited to automatically locate the extrema of a small number of potential energy wells and associated potential channels. The image feature is acquired from relationship of local extrema using the ring projection method.

• KSBB Journal
• /
• v.25 no.4
• /
• pp.371-378
• /
• 2010

For the biodiesel fuel production from microalgae, the lipid from wet and dry samples of green algae Scenedesmus sp. was extracted by using various solvents and pre-treatment methods. Extraction yield of the lyophilized sample was better than that of dry sample. Chloroform/methanol (2:1, v/v) and ultrasonication or homogenization method were also selected as the most effective solvent and pre-treatment methods for lipid extraction, respectively. Under these constraint conditions, optimization experiment of lipid extraction was investigated by Taguchi approach using orthogonal matrix $L_9$ ($3^4$) method. The optimum extraction conditions of lipid extraction was obtained at pre-treatment of homogenization, extraction time of 5 hour, temperature of $35^{\circ}C$, and solvent ratio of 1:20 (w/v). Yield of extraction at optimized condition was 20.55% and it was 96% of total lipid content (21.38%) of Scenedesmus sp.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.150-153
• /
• 2007

Hydrocarbons have been successfully used as a chemical marker in order to identify irradiated from non-irradiated foods. The method for determining hydrocarbons consists of extraction of fats, followed by separation of hydrocarbons by florisil column chromatography, and then identification of hydrocarbons by GC/MS. Currently, solvent extraction method for fats has certain limitations with regard to extraction time and solvent consumption. Commercial hams and sausage were irradiated at 0 and 5 kGy, and the efficiency of microwave-assisted extraction (MAE) and conventional solvent extraction (CSE) methods on the extraction of radiation-induced hydrocarbons from the meat products was compared. Significant levels of hydrocarbons, mainly composed of 1,7-hexadecadien, 1,7,10-hexadecatriene, and 6,9-heptadecadiene, were detected in the extracts from irradiated hams and sausages by both CSE and MAE methods. Both methods were acceptable in extracting hydrocarbons from samples, but MAE method required apparently reduced amounts of solvent from 150 (CSE) to 50 mL and reduced extraction time from 23 (CSE) to 5 min.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.5
• /
• pp.358-360
• /
• 1996

Solvent extraction, soxhlet method, and supercritical fluid extracion were considered, respectively, as the method of choice for the recovery of DHA from lyophilized Thraustochitrium sp., and the results of corresponding extraction were compared. Supercritical fluid extraction seems to be the most appropriate process with respect to time, process simplicity, and extractant intoxicity.