• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.29-36
• /
• 2013

In this paper, a new DC offset elimination filter is proposed for an accurate phasor extraction of fundamental frequency component. The proposed method can eliminate a DC offset component which is decayed exponentially. The proposed method uses only one cycle of data for phasor extraction computation, which does not need to preset the time constant of the DC offset component. Also, the other advantages of the proposed method is that gain compensation or phase compensation is not required after filtering. Simulations using ATP were performed to evaluate the performance of the proposed filter method, and the results were compared to the ones obtained by conventional methods.

• 한국식품영양학회지
• /
• 제13권1호
• /
• pp.66-70
• /
• 2000

The volatile components of Korea ginger were compared by using different isolation methods, head-space sampling procedure(HSSP), simultaneous distillation extrction(SDE) and soild pahse micro-extractions(SPME). Sixty-one components were identified by GC-MSD in the extracts obtained from each extraction methods. However, the components identified showed a difference in their composition wit the extraction methods. In the extract by HSSP, fifty-five components including a high volatile compound such as acetaldehyde, ethylacetate, 2,3-butandione were detected, and thirty-one components were identified in the extract by SPME. While, the low volatile components such as elemol, zingiberenol and ${\beta}$-eudesmol were detected only in the extract by SDE method. The results suggest that SDE method is the best for the analysis of low volatile components, whereas HSSP is a proper method for the analysis of high volatile components from natural resources.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.778-785
• /
• 2016

An excess carrier lifetime extraction method is derived for physics-based insulated gate bipolar transistor (IGBT) models with consideration of the latest development in IGBT modeling. On the basis of the 2D mixed-mode Sentaurus simulation, the clamp turn-off test is simulated to obtain the tail current. The proposed excess carrier lifetime extraction method is then performed using the simulated data. The comparison between the extracted results and actual lifetime directly obtained from the numerical device model precisely demonstrates the accuracy of the proposed method.

• 한국지능시스템학회논문지
• /
• 제13권3호
• /
• pp.281-286
• /
• 2003

웨이블릿 변환(Wavelet Transform)은 공간-주파수 영역에서 신호의 국소특성을 효율적으로 구현할 수 있다 하지만, 웨이블릿 변환을 패턴 인식을 위한 특징 추출에 적용할 경우, 입력 신호의 위치 이동에 따라 추출된 특징 값이 변화하게 되어 인식률이 낮아지는 결함이 있다. 본 논문에서는 웨이블릿 변환을 패턴 인식에 적용할 경우 발생하는 입력 신호의 위치 이동에 따른 문제점을 보완하여 노이즈에 강인한 홍채인식 알고리즘을 제안한다. 실험을 통하여 제안한 알고리즘의 우수성을 보여 준다.

• Mass Spectrometry Letters
• /
• 제14권2호
• /
• pp.36-41
• /
• 2023

A simple method was developed to determine residual p-arsanilic acid (ASA), an organo-arsenic compound used as a feed additive, in aquatic products (eel, halibut, and shrimp) using EDTA-assisted solvent extraction and LC-MRM. The method was successfully validated in terms of specificity, linearity (coefficient of determination ≥ 0.995), accuracy (recovery or R, 72.72-78.73%), precision (the relative standard deviation of R, 2.08-6.98%), and sensitivity (the lower limit of quantitation, 5 ppb) according to CODEX guidelines (CAC-GL 71-2009). The use of EDTA in the extraction solvent and water with a suitable pH modifier as the reconstitution solvent may be the key factors for successful results. This is the first method that can be used for monitoring residual ASA in aquatic products using LC-MRM and could contribute to establishing a better aquatic product safety management system.

• 한국버섯학회지
• /
• 제12권4호
• /
• pp.299-303
• /
• 2014

이번 연구에서는 식용 및 약용버섯 자실체를 가지고 버섯의 주요 기능성 성분인 총 당의 함량을 추출방법을 달리하여 비교분석하였다. 열수추출, 산추출, 알칼리 추출을 통해 총 당 측정법으로 미량의 시료에 적합한 페놀-황산법으로 측정하였다. 표준 곡선은 glucose solution을 사용하여 작성하고 측정한 흡광도를 표준곡선에 적용하여 시료의 농도를 얻었다. 열수추출에서는 동충하초가 658.4(${\mu}g/g$)로 가장 높았고, 산추출과 알칼리 추출에서는 운지버섯이 각각 649.7(${\mu}g/g$)와 679.0(${\mu}g/g$)로 가장 높음을 알 수 있었다. 추출방법별로 열수추출과 마이크로웨이브 추출로 총 당 함량을 정량한 결과 열수 추출에서는 동충하초, ASI 7025가 높았고, 1 hr 마이크로웨이브 추출 및 2 hr 마이크로웨이브 추출에서는 운지버섯, 꽃송이가 높게 나타났다. 이러한 결과를 통해 각기 다른 추출용매와 추출방법에 따라서 추출되는 총 당 함량이 다름을 알 수 있었다.

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.860-865
• /
• 1997

Investigations were performed on the effects of extraction temperature, pressure, time on solubility and selectivity of egg yolk lipid and cholesterol, and color and fatty acid composition of the residue in supercritical carbon dioxide(SC-Co$_2$) extraction. Lipid and cholesterol solubility increased as the increase of Co$_2$ density and was found to strongly depend on the extraction pressure rather than the extraction temperature. The relative concentration of cholesterol in the extract increased with an increase in temperature and decreased with an increase in pressure and extraction time. extraction of dried eg yolk for 3hr at 4$0^{\circ}C$/276 bar removed 46.1% of cholesterol from the residual egg yolk with a yield of 63.2%. SC-Co$_2$ extraction produced a lighter color egg yolk with less redness and yellowness. As the extraction time increased, the resultant residual egg yolk became more saturated with fatty acids. SC-$CO_2$ extraction offers a safe, natural method for removing cholesterol from dried egg yolk.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.31-37
• /
• 1998

This paper proposes a feature extraction method using wavelet transform for speech recognition. Speech recognition system generally carries out the recognition task based on speech features which are usually obtained via time-frequency representations such as Short-Time Fourier Transform (STFT) and Linear Predictive Coding(LPC). In some respects these methods may not be suitable for representing highly complex speech characteristics. They map the speech features with same may not frequency resolutions at all frequencies. Wavelet transform overcomes some of these limitations. Wavelet transform captures signal with fine time resolutions at high frequencies and fine frequency resolutions at low frequencies, which may present a significant advantage when analyzing highly localized speech events. Based on this motivation, this paper investigates the effectiveness of wavelet transform for feature extraction of wavelet transform for feature extraction focused on enhancing speech recognition. The proposed method is implemented using Sampled Continuous Wavelet Transform (SCWT) and its performance is tested on a speaker-independent isolated word recognizer that discerns 50 Korean words. In particular, the effect of mother wavelet employed and number of voices per octave on the performance of proposed method is investigated. Also the influence on the size of mother wavelet on the performance of proposed method is discussed. Throughout the experiments, the performance of proposed method is discussed. Throughout the experiments, the performance of proposed method is compared with the most prevalent conventional method, MFCC (Mel0frequency Cepstral Coefficient). The experiments show that the recognition performance of the proposed method is better than that of MFCC. But the improvement is marginal while, due to the dimensionality increase, the computational loads of proposed method is substantially greater than that of MFCC.

• 대한한의학회지
• /
• 제34권4호
• /
• pp.12-20
• /
• 2013

Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.

• 한국환경농학회지
• /
• 제32권3호
• /
• pp.171-178
• /
• 2013

BACKGROUND: Consensus of heavy metal phytoavailability in soils needs to be introduced for soil management protocols in relation to safer food production in the contaminated agricultural soils. For this, setting up the method for evaluation of metal phytoavailability in soil is an essential prerequisite. METHODS AND RESULTS: The current study was carried to select a proper single extraction method for determination of phytoavailable metal concentration in soil. Two extraction methods were examined including 1 M $NH_4NO_3$ extraction and 0.01 M $Ca(NO_3)_2$ extraction methods using 142 soil samples collected from the agricultural soils nearby abandoned mining area in Korea. Corelation analysis was conducted between phytoavailable metal concentrations and soil properties potentially influencing on the metal phytoavailability. Both methods showed similar significance (p<0.001) in correlation with soil properties such as soil pH. However, higher correlation coefficients between phytoavailable metal concentrations and soil properties were observed when used $Ca(NO_3)_2$ extraction rather than using $NH_4NO_3$ extraction. CONCLUSION(S): It appeared that 0.01 M $Ca(NO_3)_2$ extraction was better option for determination of phytoavailable metals in soils and further study to test the efficiency of this method is required in combination with plant uptake.