• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.3
• /
• pp.211-223
• /
• 2000

The atmospheric dispersion of a pollutant emitted from a hypothetical source located in the middle of the Yochon Industrial Estate was simulated by using the Regional Atmospheric Modeling System (RAMS). Four horizontally nested grids were employed: the coarsest one covered the southern part of the Korean Peninsula including Mt. Chiri and the finest one covered the Yochon Industrial Estate and the surrounding area. Wind fields were initially assumed horizontally homogeneous with a wind speed of 4m/s, the average for the Yosu area, and were developed without both external forces and diurnal changes in order to investigate the terrain-induced phenomena. Wind directions that could emphasize the terrain effects on the pollutant transport and that could carry pollutants to a highly-popluated area were selected for the dispersion study. A pollutant was released for 24hours from a grid-base volume source after a 24-h blank run for developing the wind field. The dispersion study showed that the pollutant from the present source location did not directly affect the Yosu City, but showed high concentrations at locations behind the hills 5 to 6 km away from the source according to wind directions. When the wind speed was low, close to calm condition, the pollutant was detected at upstream locations 6 to 7 km from the source. In comparison with the results from the RAMS simulation, the Industrial Source Complex Short-Term Model(ISCST3) predicted a narrow dispersion that was sensitive to the wind direction. When the wind velocity was affected by the local environment, the ISCST3 calculation using that data also gave a lop-sided result, which was different from the distribution of the pollutant reproduced by RAMS.

• Korean Journal of Remote Sensing
• /
• v.25 no.4
• /
• pp.367-374
• /
• 2009

Recently, new GIS applications such as gee portal and spatial data infrastructure are emerging. These are related to web computing techniques or methodologies based on web 2.0 paradigm, open API of portal, open source GIS, and international GIS standards which are independently on developing. The product of these applications can be realized in the linkage of those components. In this study, a case implementation concerning linkage with Google maps API and open source middleware named Deegree is carried out, and the results are discussed for open source uses in geo portal. Open source middleware supports various levels and types of OGC standards, so that it enables web publishing in the several web standard formats and data exchanges and interoperable uses between external database servers. Also the (unction extensions and the multi tier-based architecture within geo portal for specific purpose are possible.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.104-109
• /
• 2021

In this paper, we experimentally demonstrate a self-seeding FP-LD (Fabry Perot Laser Diode) to verify the possibility of a new tunable light source that can be used in WDM-PON (Wavelength Division Multiplexing - Passive Optical Network) system. The conventional implementation of WDM-PON using a tunable light source has a disadvantage that the center wavelength of the AWG (Arrayed Waveguide Grating) device and the tunable light source must be precisely aligned. However, the proposed tunable light source has the advantage that the tunable wavelength is automatically aligned with the center wavelength of the AWG as well as simple structure. The implemented tunable light source had a tunable band of about 14 nm or more, and the maximum RIN (Relative Intensity Noise) of about -124 dB/Hz, which showed the possibility of modulating 10 Gb/s signal by an external modulator.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.331-344
• /
• 2014

This study attempts to explore the difference of innovation sources between high-tech industry and mid-tech industry through patent analysis. After extracting 119 corporates, commonly surveyed in 2007 HCCP(Human Capital Corporate Panel) and 2005~2006 Korea Innovation Survey, their patents applied for the Korean Intellectual Property Office in 2007~2012 are analysed mainly through negative binomial regression model. Analytical results shows that external information source could be opposite effects to technological innovation depending on technological level and industrial characteristics. The current results are still bounded in the statistical significance, mainly due to the limited observations and information.

• Journal of the Korean Mathematical Society
• /
• v.37 no.5
• /
• pp.779-791
• /
• 2000

The nonlinear stage of the evolution of free boundary between a light fluid and a heavy fluid driven by an external force is studied by a potential flow model with a source singlarity. The potential flow model is applied to a bubble and spije evolution for constantly accelerated interface (Rayleigh-Taylor instability) and impulsively accelerated interface (Richtmyer-Meshkow instability). The numerical results of the model show that, in constantly accelerated intergace, bubble grows with constant velocity and the spike falls with gravitational acceleration at later times, while the velocity of the bubble in impulsively accelerated interface decay to zero asymp flow model for the bubble and spike for constantly accelerated interface and impulsively accelerated interface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.6
• /
• pp.372-375
• /
• 2017

ZnO thin films were deposited by RF magnetron sputtering and then diffused by using an As source in the ampouletube. Also, the ZnO p-n homojunction was made by using As-doped ZnO thin films, and its properties were analyzed. After the As doping, the surface roughness increased, the crystal quality deteriorated, and the full width at half maximum was increased. The As-doped ZnO thin films showed typical p-type properties, and their resistivity was as low as $2.19{\times}10^{-3}{\Omega}cm$, probably because of the in-diffusion from an external As source and out-diffusion from the GaAs substrate. Also, the ZnO p-n junction displayed the typical rectification properties of a p-n junction. Therefore, the As diffusion method is effective for obtaining ZnO films with p-type properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.86-89
• /
• 1995

In this pacer, The effect of the impedances in SNOSEFT s memory devices has been developed. The effect of source and drain impedances are measuring using the method of the field effect bias resistance in the inner resistance regions of the device structure and external bias resistance. The effect of impedance by source and drain resistance shows according to increasing to the storage of memory charges, shows according to a function of decreasing to the gate voltages, shows the delay of threshold voltages, The delay time of low conductance state and high conductance state by the impedance effect shows 3 [${\mu}$sec] and 1[${\mu}$sec] respectively.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.183-186
• /
• 2014

In this letter, we consider a cooperation system with multiple untrusted relays (URs). To keep the transmitted information confidential, we obtain joint channel characteristics (JCCs) through combining the channels from the source to the destination. Then, in the null space of the JCCs, jammers construct artificial noise to confuse URs when the source node broadcasts its data. Through a distributed implementation algorithm, the weight of each node can be obtained from its own channel state information. Simulation results show that high-level security of the system can be achieved when internal and external eavesdroppers coexist.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.318-321
• /
• 2005

In vibro-acoustic analysis, the commercial CAE tools, such as SYSNOISE, is usually used to take into account of the coupled effects of fluid acoustics and structural vibration. The acoustic field can be solved by either FEM or BEM, while the vibration field is usually solved by FEM. The interior or exterior acoustic problems with the coupled effects of the structural boundary could be solved by the commercial tools. The commercial tools, however, could not solve the problems in case that both the interior and exterior acoustic field is coupled with the structural boundary. In this paper, a realistic method based on FEM/BEM coupling scheme is presented to analyze the acoustic radiation from the internal source in a chamber to external acoustic field through elastic structural boundary. Several numerical examples are implemented to validate the developed program.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.8-15
• /
• 2003

When a typoon sets into harbour, a moored ship shows erratic motions and even mooring line failure may occur. such troubles may be caused by harbour resonance phenomena, resulting in large motion amplitudes at low frequency, which is close ti the natural frequency of th moored ship. The nonlinear motions of a ship moored to quay are simulated under external forces due to wave, current including mooring forces in time domain. The forces due to waves are obtained from source and dipole distribution method in the frequency domain. The current forces are calculated by using slow motion maneuvering equation in the horizontal plane. The wind forces are calculated from the empirical formula of ABS and the mooring forces of ropes and fenders are modeled as linear spring.