This is a brief review and discussion for present status and prospects of quality evaluation in medicinal plants as oriental medicine materials (OMM). Quality in medicinal plants could be defined as the combination of origin, external appearance, effectiveness and safety, and be evaluated by plant taxonomic, morphological, physiochemical and biological methods. For high-quality improvement and standardization of OMM, medicinal plants should be produced through using proper species or good variety and standard cultivation method in suitable cultivation area. Standardizing of quality means to meet with minimum qualifying criteria of OMM in the market while improving of quality to be over standard quality of medicinal piano in production. For making new high quality and standardized products, we need to keep standard field plants, standard OMM, standard plant specimen, and standard compounds. Researchers and administration have to study and propose the quality factors and their evaluating techniques and criteria, so high-quality and standardized produce of medicinal plane could be produced and distributed under the control of the relevant regulations, and would be contributed to increasing of national health.
In order to achieve the high quality output voltage of single-phase voltage source inverters, in this paper an Adaptive Complementary Sliding Mode Control (ACSMC) is proposed. Firstly, the dynamics model of the single-phase inverter with lumped uncertainty including parameter variations and external disturbances is derived. Then, the conventional Sliding Mode Control (SMC) and Complementary Sliding Mode Control (CSMC) are introduced separately. However, when system parameters vary or external disturbance occurs, the controlling performance such as tracking error, response speed et al. always could not satisfy the requirements based on the SMC and CSMC methods. Consequently, an ACSMC is developed. The ACSMC is composed of a CSMC term, a compensating control term and a filter parameters estimator. The compensating control term is applied to compensate for the system uncertainties, the filter parameters estimator is used for on-line LC parameter estimation by the proposed adaptive law. The adaptive law is derived using the Lyapunov theorem to guarantee the closed-loop stability. In order to decrease the control system cost, an inductor current estimator is developed. Finally, the effectiveness of the proposed controller is validated through Matlab/Simulink and experiments on a prototype single-phase inverter test bed with a TMS320LF28335 DSP. The simulation and experimental results show that compared to the conventional SMC and CSMC, the proposed ACSMC control strategy achieves more excellent performance such as fast transient response, small steady-state error, and low total harmonic distortion no matter under load step change, nonlinear load with inductor parameter variation or external disturbance.
Background: The elevated risk of occupational infection such as tuberculosis among health workers in many countries raises the question of whether the quality of occupational health and safety (OHS) and infection prevention and control (IPC) can be improved by auditing. The objectives of this study were to measure (1) audited compliance of primary health-care facilities in South Africa with national standards for OHS and IPC, (2) change in compliance at reaudit three years after baseline, and (3) the inter-rater reliability of the audit. Methods: The study analyzed audits of 60 primary health-care facilities in the Western Cape Province of South Africa. Baseline external audits in the time period 2011-2012 were compared with follow-up internal audits in 2014-2015. Audits at 25 facilities that had both internal and external audits conducted in 2014/2015 were used to measure reliability. Results: At baseline, 25% of 60 facilities were "noncompliant" (audit score<50%), 48% "conditionally compliant" (score >50 < 80%), and only 27% "compliant" (score >80%). Overall, there was no significant improvement in compliance three years after baseline. Percentage agreement on specific items between internal and external audits ranged from 28% to 92% and kappa from -0.8 to 0.41 (poor to moderate). Conclusion: Low baseline compliance with OHS-IPC measures and lack of improvement over three years reflect the difficulties of quality improvement in these domains. Low inter-rater reliability of the audit instrument undermines the audit process. Evidence-based investment of effort is required if repeat auditing is to contribute to occupational risk reduction for health workers.
Background: Children with cerebral palsy have difficulty acquiring motor skills through motor learning due to lack of motor planning of the central nervous system and musculoskeletal dysfunction. Motor learning is the acquisition or modification of movements with the aim of developing skilled movements and behaviors. Cerebral palsy improve motor function through motor learning, and effective motor learning mainly depends on practice parameters such as learning feedback. Therefore, we investigate the effect of motor learning in children with cerebral palsy and try to present the possibility of clinical application. Design: A systemic review. Methods: Research papers were published from Jan, 2010 to Dec, 2020 and were searched using PubMed and Medline. The search terms are 'task specific training' OR 'motor learning' OR 'feedback(Mesh term)' OR 'goal activity' AND 'cerebral palsy(Mesh term)'. A total of eight papers were analyzed in this study. The paper presented the quality level based on the research evidence, and also presented PEDro (Physiotherapy Evidence Database) scores to evaluate the quality of design studies in randomized clinical trials. Results: The results showed that motor learning coaching in children with cerebral palsy improved motor function in post and follow up tests. Also, self-control feedback of motor learning is more effective than external control feedback. 100% external control feedback of motor learning is effective in the acquisition phase and 50% external feedback of motor learning is effective in the retain phase. Conclusion: These results suggest that it will be an important data for establishing evidence on the effect of motor learning arbitration methods in children with cerebral palsy to develop clinical applicability and protocols.
Proceedings of the Korean Society of Medical Physics Conference
/
2002.09a
/
pp.17-18
/
2002
Last year, a three-year research program was started in order to establish an external audit system to radiotherapy QA in Japan. It consists of questionnaire surveys, mailed (off-site) dosimetry and visited (on-site) dosimetry at radiotherapy facilities in Japan. The first questionnaire was sent to all Japanese radiotherapy facilities in October 2001, surveying basic QA procedures at each facility. 628 answers were returned with the return rate of 87%. In February 2002, the second questionnaire was sent. Off-site and on-site dosimetry have been tested in several facilities, and will be started soon. We anticipates that this program will gradually grow to a radiotherapy quality control center similar to Radiological Physics Center at MD Anderson Hospital.
Active suspension system improves ride quality with optimized suspension force, generated by electric, hydrolic or pneumatic power and controlled by micro-processor under various operation condition of train, while Semi-Active susepsion system provides optimized and controlled characteristics of suspensions such as damping coefficient without external energy. The benefits fo Semi-Active suspension are no required power source and to be made compact with lower cost. Train with narrow gauge could be more unstable than one for normal or wide gauge, and it could be more vibrated than others one by external force such as aerodynamic force and track irregularity. So, the reduced ride quality could be improved with appling with Semi-active suspension system. In this report, the Semi-Active suspension system for narrow gauge train shall be proposed and to prepare the Roller Rig test of this train, integration of system, development of control algorithm and confirmation of its performance with simulation tool would be taken.
The purpose of this study was to serve a standard of the good quality control and shelf-life of food and beverage served from the vending machines. So it was performed to examine the temperature (internal & external environmental, food itself), pH, Aw, POV and microbiological quality of Adlay tea and Wheat noodles served from the vending machines based on storage time in the machines. They were assessed to find the critical control point(CCP) during each of the production, delivery, purchasing phases from the vending machines. The result of this study can be summarized as follows: 1. The temperature of foods inside the vending machines was ranged from 4$0^{\circ}C$ to 45$^{\circ}C$. It was in the range of dangerous zone. The average temperature of food showed 71$^{\circ}C$ for Adlay tea and 74$^{\circ}C$ for Wheat noodles. As a result of measuring pH and Aw, they had potential danger. 2. Even though POV was low, it increased as the time passed. 3. As a result of microbial analysis, it showed that the amount of total plate count and coliforms were increased ten times after 1 day respectively. Wheat noodles' coliform and total plate counts exceeded standard value in 1 day. As a result of food poisoning bacteria, it was negative in sample against Vibrio parahaemolyticus, Salmonella, Staphylococcus aureus.
Korean oil and honey Yukwa has been paid attention as formal cake for traditional national seasons' holiday and religious service. Quality of Yukwa, however, has been maintained arbitrarily by each Yukwa manufacturer. Since even same Yukwa had severe differences in size, weight, and pattern, it has given the negative effect to the consumer. Yukwa industries need to setup the quantitative quality specifications instead of qualitative ones to maintain the uniformity of Yukwa quality. Efficient and economical inspection and process control system should be developed. In developing quality standards of Yukwa, features which can measure quality quantitatively in real time should be properly chosen. Existing quality features such as acidity, oxidization, hardness, viscosity, and texture were measured by the chemical or physical base destructive methods. Many research and developments have been performed in investigating and analyzing chemical transition states of those quality features as environment or storage condition changes. Most methods, however, require either off-line or complex treatment or time consuming process of analysis in evaluating quality features. Consumer, however, selects products mostly based on the external features such as shape, size, and color. Therefore, critical visual quality features should be chosen and the efficient real time measurement system must be developed. In this paper, computer image acquisition and processing system were developed and software modules were developed to extract the quantitative data of those features in real-time. Computer image processing system will promote in maintaining uniform quality of Yukwa and establishing quality standards of Yukwa.
TAHIR, Safdar Husain;AKRAM, Sadaf;PERVEEN, Shahida;AHMAD, Gulzar;ULLAH, Muhammad Rizwan
The Journal of Asian Finance, Economics and Business
/
v.7
no.8
/
pp.95-102
/
2020
The purpose of this study is to test both the alignment theory and entertainment theory on family firms listed on the Pakistan Stock Exchange. To achieve these goals, we collected secondary data from 164 non-financial family firms in various sectors during 2014-18. These family firms are classified into two categories: family control firms and family owned firms. We take the audit fee and the audit quality as dependent variables while family control firms, family-owned firms, and family CEOs as independent variables. In addition, the study uses leverage, profit and export as control variables. To test the effect of the explanatory variables on the output variables, we use two econometric models, Ordinary Least Square and the Probit regression model. In addition, Huber Sandwich test is used to check the non-normality and heteroscedasticity of panel data. Contrary to the alignment effect, the study supports the entrenchment effect and advocates that family-controlled firms as well as family-owned firms are not conscientious regarding the selection of external auditors during their contracts with audit firms. They are less likely to pay high audit fees for good quality audit in Pakistan. Furthermore, the study shows a statistically significant and positive relationship between audit quality and audit fees.
Lyophilized whole blood samples containing various concentrations of Pb and Cd have been prepared as external quality control materials. These materials have been characterized with graphite furnace atomic absorption spectrometry(GFAAS), The optimized conditions for the quantitative determination of Ph and Cd in whole blood using GFAAS were obtained at the ashing temperature of $600{\sim}650^{\circ}C$ with 0.1% ammonium dihydrogen phosphate and 0.1% Triton X-100 as matrix modifier. Homogeniety and stability of the prepared whole blood have been studied at the optimized analytical condition.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.