• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1065-1068
• /
• 2008

Concrete is still one most common construction materials even in railway structures. As structures become massive and mega-sized, the importance of early age concrete quality control becomes more significant. Among various factors, relative humidity and temperature are the primary factors governing the early age quality. Temperature raise due to cement hydration causes stress, which can develop to cracking with internal and/or external restraints. Exposure conditions including ambient temperature, humidity and wind also significantly affect the cracking behavior of early age concrete. Among many of studies on the early age concrete behavior, investigation on the variation of temperature and relative humidity internal of concrete is not common. That is in part because the difficulties in measuring the relative humidity and temperature inside the concrete. This study used a digital sensor with an appropriate logger to measure internal temperature and relative humidity. This direct measuring method is expected to provide more reliable and comprehensive data acquisition on the early age behavior of concrete.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.851-856
• /
• 2013

Recently, as the tactical environment has changedto one of network-centric warfare, where all components are connected through a network, much emphasis has been placed on the use of an artificial satellite for achieving high communication speeds. To provide a high-quality artificial satellite link, stabilization is very important in a platform. Previous stabilization control techniques used PI control, which is commonly used for vessels. However, for ground terminals that require a higher communication speed, the antenna should move faster to track an artificial satellite within a short period of time. Moreover, the terminals must be equipped with proper sensors and algorithms so that they can detect and compensate for external disturbances while tracking the artificial satellite. In this study, through the analysis of the dynamic model of an antenna system, a stabilization algorithm for ground terminals was proposed;this algorithm shows high isolation performance in the low-frequency range and includes $PI^2$ control.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.81-89
• /
• 2009

Dancer systems are typical equipment for attenuation of tension disturbances. Lately, demands for high speed roll-to-roll machines are rising but it is prior to attenuate the tension variation on the web entering into the printing zone to achieve the speed increment. Maintaining a constant tension before the first printing cylinder is the key of high speed, high quality printing. Dancer has been researched in two ways, whether it is controlled or not. The first one is active dancer and the other one is passive dancer. In the active dancer, a position of idle roll of dancer is measured and the roll is moved by external hydraulic cylinder to control tension disturbances. While the passive one composed with spring, damper and idle roll has no external actuator to position the idle roll. The tension disturbance causes movement of dancer roll and the displacement of the roll regulates the tension variation. On the other hand a composite type of dancer is applied for roll-to-roll printing machines. It has same apparatus as passive dancer. The displacement of roll is measured and front(or rear) driven roller is controlled to position the roll. In this paper, it is presented an analysis of pendulum dancer including position feedback PI control and logic for PI gain tuning in roll-to-roll machines. Pole-zero map and root locus with varying system parameters gives a design method for control of the dancer.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.3
• /
• pp.129-136
• /
• 2022

The most important part of the smart livestock building system is to maintain a breeding environment so that livestock can grow to high quality despite changes in the internal and external atmospheric environment. Especially, it is very important to maintain the temperature and humidity in the livestock building because various diseases occur during the summer and winter. To manage the environment suitable for livestock, a smartfarm system for livestock building is applied, but it is very expensive. In this study, we propose a hardware design and control method for low cost system based on HMI and fuzzy control. To evaluate the performance of the proposed system, we did a simulation experiment in the atmospheric conditions of summer and winter. As a result, it showed the performance of minimizing the temperature and humidity stress of livestock. And when applied to the livestock building, the proposed system showed stable control performance even in the change of the external atmospheric environment. Therefore, as with these results, if proposed system in this study is applied to the smart farm system, it will be effective in managing the environment of livestock building.

• Journal of Korean Society on Water Environment
• /
• v.34 no.3
• /
• pp.301-307
• /
• 2018

This study investigated the effects of sediment removal on water quality and phytoplankton development by setting up mesocosms at Uiam Lake, South Korea, and analyzing the environmental parameters and phytoplankton communities between June and October 2015. The comparison between testbed without sediment removal (TB-1) and testbed after sediment removal (TB-2) gave similar values for water temperature, pH, dissolved oxygen (DO), and electrical conductivity. Nevertheless, the average electrical conductivities of the two testbeds were $139{\mu}S/cm$ and $135{\mu}S/cm$, which were lower than the value obtained from the external control point (TB-con; $154{\mu}S/cm$). The small difference in total phosphorus (TP) and total nitrogen (TN) concentrations between the two testbeds implied that sediment removal did not greatly reduce nutrients; however, the phytoplankton cell count had decreased by approximately 37 % in TB-2 (average 1,663 cells/mL) compared to TB-1 (average 2,625 cells/mL). Compared to TB-con, the phosphorus and nitrogen concentrations of the two testbeds had decreased by 39 % and 30 %, respectively, whereas the phytoplankton abundance had decreased by up to 73 %, perhaps because of the blocked inflow of nutrients and the stabilized body of water caused by the installation of the mesocosm. The concentration of geosmin was lower in testbeds than in the external point, because installation of the structures had reduced the cyanobacteria biomass.

• Food Science of Animal Resources
• /
• v.40 no.3
• /
• pp.323-337
• /
• 2020

This study was conducted to investigate whether adding different levels of raw or differently processed chickpea into different diets of laying quails affected live weight, feed intake, feed efficiency, egg weight and internal and external egg quality. Chickpea was used as raw, autoclaved or microwave-processed, and it was involved in the diets on two different levels (20% and 40%). The sample was divided into 7 groups including the control, 20% and 40% raw, 20% and 40% autoclaved, and 20% and 40% microwave-processed groups. 336 ten-week-old female laying quails were used in the study, and the experiment continued for 19 weeks. In the study, the differences among the groups were insignificant in terms of live weight, feed intake, feed efficiency, egg weight and egg quality characteristics such as shell thickness, shell weight, yolk weight, yolk color and albumin index. The differences were significant in terms of the shape index, Haugh unit (p<0.05) and yolk index (p<0.01). Consequently, it was observed that different thermal processes on chickpeas did not usually have a significant effect on the yield performance of the quails, and the results that were obtained were similar to the other groups. However, it was determined that some egg quality characteristics were affected by the autoclaving and microwaving processes. Between the thermal processes, it may be stated that autoclaving provided better results.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.203-236
• /
• 2002

Environmental Performance Evaluation(EPE) is a key process of Corporate Environmental Management. This paper presents the results of an empirical survey on the status of current practices in EPE of Korean firms. Based on a corporate environmental management(CEM) model, which is initially developed by Hibbitt and Kamp-Roelands(2001) and modified in terms of EPE, the survey is peformed on the population of Korean firms, which are composed of firms certified as "environmentally friendly" by Korean government and/or certified under Is014001, and compares its results with those of Europe's. Although the relatively low response rate and some methodological limitations makes us be cautious about the interpretation, the results shows many interesting aspects of the current states of Korean firms' EPE practices. That is, the levels of EPE implementation in the environmentally-leading companies of Korea are almost the same as that of European companies, I. e., in the-final-part-of-developing-stage (3rd stage) level of the CEM model. It is also shown that as In Europe's case, Korean firms are also moving slower in external relationships than in internal control and management, are more developed in the parameters like environmental policy, Internal control, Information system, which are requirements of certification under Is014001, than in parameters like life cycle analysis and full cost accounting, which requires more research efforts, etc.orts, etc.

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.135-141
• /
• 1992

Effects of various artificial light sources on the growth of Chinese white cabbage, Chinese flat cabbage, lettuce, garland chrysanthemum, and green perilla were investigated. Plants were grown under different treatments for three weeks. Generally, the growth of artificial light treatment were better than natural daylight(ND). The greatest growth and external quality occurred in high-pressure sodium lamp(HPS). In incandescent lamp(IL), fresh weight was heavy, but marketable quality was poor because of succulent(or spindly) growth. Overall, vitamin C content were no difference among treatments. But relative chlorophyll content was somewhat high in HPS.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3794-3803
• /
• 2000

In a Video-on-Demand system, admission control that is used to serve multimedia data efficiently has to be perfonned by an accurate grasp of the condition of surplus resources. Most of all. we need to adaptable admission control mechanism because the disk has irregular response time caused by external elements of disk, and also has high deviation of amount demanded. In previous admission control schemes, they determined whether a new user is granted or not through a theoretical value. Although they based on the measurement, they left much to be desired in dealing with the service state. Measurement ~based statistical admission control scheme, as we su~~ested in this research, perfonns 2 processes of off-line process and on-line process in real service environment. Through this processes, we can grasp the accurate resource state of system and adaptive!y detennine the admission according to circumstances. Therefore, it can guarantee both maximum resource utilization and QoS(Quality of Service). On performance evaluations, we show that the video server can utilize maximum resource utilization with QoS guarantee through precision of perfonnance by measurement and adaptable admission control according to the requested bandwidth.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.484-490
• /
• 2000

The abjective of the study is the development of the system for effective prediction of residual stresses using the backpropagation algorithm from the neural network. To achieve this goal, the series experiment were carried out and measured the residual stresses using the sectional method. Using the experimental results, the optional control algorithms using a neural network should be developed in order to reduce the effect of the external disturbances on during GMA welding processes. Then the results obtained from this study were compared between the measured and calculated results, the neural network based on backpropagation algorithm might be controlled weld quality. This system can not only help to understand the interaction between the process parameters and residual stress, but also improve the quantity control for welded structures.