• Korean Journal of Poultry Science
• /
• v.39 no.2
• /
• pp.105-112
• /
• 2012

Genetic resource conservation of indigenous species is important to conserve terrestrial, aquatic and avian species throughout the world. The native Korean Oge (KO) chickens are important and protected indigenous avian species in Korea. This KO breed is very popular in Korea because of its external appearances of blackish color. The characterization of morphology and growth performances of KO were performed since 1980s, however the information is still not sufficient for breed selection. In this study, we compared various growth performances including body growth, tibia length, shank length, chest width, chest grith and length of tail feather between male and female chickens of KO and widely known White Leghorn (WL) breeds at 1 week, 2 weeks, 5 weeks, 10 weeks, and 24 weeks. We observed differences on various growth performances at different aged groups between KO and WL chickens. This study may help for the selection of chicken breeds based on age, body growth and meat production.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.162-162
• /
• 2011

Nanometer-sized noble metals can trap and guide sunlight for enhanced absorption of light based on surface plasmon that is beneficial for generation of hot electron flows. A pulse of high kinetic energy electrons (1-3 eV), or hot electrons, in metals can be generated after surface exposure to external energy, such as in the absorption of light or in exothermic chemical processes. These energetic electrons are not at thermal equilibrium with the metal atoms. It is highly probable that the correlation between hot electron generation and surface plasmon can offer a new guide for energy conversion systems [1-3]. We show that hot electron flow is generated on the modified gold thin film (<10 nm) of metal-semiconductor (TiO2) Schottky diodes by photon absorption, which is amplified by localized surface plasmon resonance. The short-circuit photocurrent obtained with low energy photons (lower than bandgap of TiO2, ~3.1-3.2 eV) is consistent with Fowler's law, confirming the presence of hot electron flows. The morphology of the metal thin film was modified to a connected gold island structure after heating to 120, 160, 200, and 240$^{\circ}C$. These connected island structures exhibit both a significant increase in hot electron flow and a localized surface plasmon with the peak energy at 550-570 nm, which was separately characterized with UV-Vis [4]. The result indicates a strong correlation between the hot electron flow and localized surface plasmon resonance with possible application in hot electron based solar cells and photodetectors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.371-372
• /
• 2012

We have studied lead-based gapless semiconductors, $PbPdO_2$, which is very sensitive to external parameters such as temperature, pressure, electric field, etc[1]. We have fabricated pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films using the pulsed laser deposition. Because of the volatile element of Pb, it is very difficult to grow the films. Note that in case of $MgB_2$, Mg is also volatile element. So in order to enhance the quality of $MgB_2$, some experiments are carried out in annealing with Mg-rich atmosphere [2]. This annealing process with volatile element plays an important role in making smooth surface. Thus, we applied such process to our studies of $PbPdO_2$ thin films. As a result, we found the optimal condition of ex-situ annealing temperature ${\sim}650^{\circ}C$ and time ~12 hrs. The ex-situ annealing brought the extreme change of surface morphology of thin films. After ex-situ annealing with PbO-rich atmosphere, the grain size of thin film was almost 100 times enlarged for all the thin films and also the PbO impurity phase was smeared out. And from X-ray diffraction measurements, we determined highly crystallized phases after annealing. So, we measured electrical and magnetic properties. Because of reduced grain boundary, the resistivity of ex-situ annealed samples changed smaller than no ex-situ sample. And the carrier densities of thin films were decreased with ex-situ annealing time. In this case, oxygen vacancies were removed by ex-situ annealing. Furthermore, we will discuss the transport and magnetic properties in pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films in detail.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.462-473
• /
• 2010

Inductions of hybrids and reciprocal hybrids between Oryzias dancena and O. javanicus (ODJ and OJD) were conducted and backcross hybrids between female O. dancena and male ODJ were also produced for biological and cytogenetic analysis. Embryonic development of ODJ and OJD were compared with those of their parents. Developmental time was fastest in O. dancena and ODJ, followed by O. javanicus and OJD. Oryzias dancena hatched 11 days (d) after fertilization, ODJ at 13 d, O. javanicus at 14 d and OJD at 15 d. The abnormality of external morphology rate in ODJ was 10.6%; however, OJD showed a high degree of abnormality, over 90%. The proportion of males was 90.0% and 31.3% for ODJ and OJD, respectively. Cytogenetic analysis was conducted to obtain basic information for genetic identification of O. dancena, O. javanicus and their hybrids. The karyotypes of all experimental groups showed 2n=48 chromosomes and the fundamental number (FN) was 48. The first pair carried secondary constrictions near the centromeric regions. Erythrocyte area and volume were $9.8\;{\pm}\;0.5\;{\mu}m^2$ and $18.2\;{\pm}\;1.0\;{\mu}m^3$, respectively, for O. dancena, $8.3\;{\pm}\;0.5\;{\mu}m^2$ and $15.8\;{\pm}\;1.5\;{\mu}m^3$ in O. javanicus, and $18.3\;{\pm}\;0.5\;{\mu}m^2$ and $15.7\;{\pm}\;1.3\;{\mu}m^3$ in ODJ. Erythrocyte area and volume in ODJ were similar to those of O. javanicus. In backcross hybrids between female O. dancena and male ODJ, all embryos failed to develop and died in the late gastrula stage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.73-73
• /
• 2012

Modern technology-driven society largely relies on hybrid electric vehicles or electric vehicles for eco-friendly transportation and the use of high technology devices. Lithium rechargeable batteries are the most promising power sources because of its high energy density but still have a challenge. Graphite is the most widely used anode material in the field of lithium rechargeable batteries due to its many advantages such as good cyclic performances, and high charge/discharge efficiency in the initial cycle. However, it has an important safety issue associated with the dendritic lithium growth on the anode surface at high charging current because the conventional graphite approaches almost 0 V vs $Li/Li^+$ at the end of lithium insertion. Therefore, a fundamental solution is to use an electrochemical redox couple with higher equilibrium potentials, which suppresses lithium metal formation on the anode surface. Among the candidates, $Li_4Ti_5O_{12}$ is a very interesting intercalation compound with safe operation, high rate capability, no volume change, and excellent cycleability. But the insulating character of $Li_4Ti_5O_{12}$ has raised concerns about its electrochemical performance. The initial insulating character associated with Ti4+ in $Li_4Ti_5O_{12}$ limits the electronic transfer between particles and to the external circuit, thereby worsening its high rate performance. In order to overcome these weak points, several alternative synthetic methods are highly required. Hence, in this presentation, novel ways using a synergetic strategy based on 1D architecture and surface coating will be introduced to enhance the kinetic property of Ti-based electrode. In addition, first-principle calculation will prove its significance to design Ti-based electrode for the most optimized electrochemical performance.

• Journal of Species Research
• /
• v.9 no.4
• /
• pp.362-374
• /
• 2020

A total of 35 bacterial strains were isolated from various sediment samples. From 16S rRNA gene sequence similarities higher than 98.7% and the formation of a robust phylogenetic clade with the closest species, it was determined that each strain belonged to independent and predefined bacterial species. No previous official reports have described these 35 species in Korea. The unrecorded species were assigned to 6 phyla, 10 classes, 18 orders, 23 families, and 31 genera. At the genus level, the unrecorded species were affiliated with Terriglobus of the phylum Acidobacteria, as well as with Mycobacterium, Rhodococcus, Kineococcus, Phycicoccus, Agromyces, Cryobacterium, Microbacterium, and Arthrobacter; Catellatospora of the class Actinomycetia; Lacibacter of the class Chitinophagia; Algoriphagus and Flectobacillus of the class Cytophagia; Flavobacterium and Maribacter of the class Flavobacteriia; Bacillus, Cohnella, Fontibacillus, Paenibacillus, Lysynibacillus, and Paenisporosarcina of the class Bacilli; Bradyrhizobium, Gemmobacter, Loktanella, and Altererythrobacter of the class Alphaproteobacteria; Acidovorax of the class Betaproteobacteria; Aliiglaciecola, Cellvibrio, Arenimonas, and Lysobacter of class Gammaproteobacteria; and Roseimicrobium of the class Verrucomicrobia. The selected strains were subjected to further taxonomic characterization, including Gram reaction, cellular and colonial morphology, and biochemical properties. This paper provides detailed descriptions of the 35 previously unrecorded bacterial species.

• Korean Journal of Ichthyology
• /
• v.29 no.2
• /
• pp.94-100
• /
• 2017

Three pseudo-silver eels (PS1~PS3) were found by analysis of silvering index and biological characteristics of 454 eels, Anguilla japonica, collected from the 9 sites of Korean fresh and brackish waters from September 2014 to August 2015. Two specimens (PS1~PS2) from Lake Soyang and one (PS3) from Geum river estuary were identified as pseudo-silver eel showing a large difference between silvering index and GSI. The external morphology of the pseudo-silver eels were in S2 (late silver eel) stage, but they were classified into Y1 (yellow eel) and Y2 (late yellow eel) stage in GSI, Gut index, Eye index and Y2 stage in gonadal development and mean egg diameter.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.589-594
• /
• 2002

Natural clonal stock of triploid crucian carp, Carassius aurahs was identified and its cytogenetic, molecular genetic and morphological traits were studied. Cytogenetic analysis of the clonal crucian carp revealed that they were natural triploidy, evidenced by 1.5-fold increases of cell size, DNA content, and chromosome number. Multi-locus DNA fingerprinting using $(GATA)_4$ probe showed that they had an identical fingerprint profile, indicating the clonal propagation of the population. External morphology and morphometric characteristics of triploid individuals were much uniform compared to those of diploids. Natural triploid crucian carp was proven to be all-female in this study.

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.366-372
• /
• 2017

Plasma electrolytic oxidation(PEO) has attracted attention as a surface treatment which has high wear resistance and corrosion resistance. PEO is generally considered as cost-effective, environmentally friendly and superior in terms of coating performance. Most of studies about the PEO processes have been applied to light metals such as Al and Mg. Because the strength of Al and Mg is weaker than that of steel, there is a limit to the application. In this study, PEO process was used to form oxide coatings on Hot dipped aluminized(HDA) steel and the characteristics of the coating film according to the PEO current density were studied. The morphology was observed by SEM and component was analyzed by using EDS. The corrosion behaviors of PEO coating films were estimated by exposing salt spray test at 5 wt.% NaCl solution and measuring polarization curves in deaerated 3 wt.% NaCl solution. With the increase of PEO process current density, the pore size of the coating surface and the thickness of coating increased. It was confirmed that no Fe component was present on the coating surface. PEO coating films obviously showed good corrosion resistance compared with HDA. It is considered that the PEO coating acts as a barrier to protect the base material from external factors causing corrosion.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.235-248
• /
• 2018

Background: Injectable hydrogels have been extensively researched for the use as scaffolds or as carriers of therapeutic agents such as drugs, cells, proteins, and bioactive molecules in the treatment of diseases and cancers and the repair and regeneration of tissues. It is because they have the injectability with minimal invasiveness and usability for irregularly shaped sites, in addition to typical advantages of conventional hydrogels such as biocompatibility, permeability to oxygen and nutrient, properties similar to the characteristics of the native extracellular matrix, and porous structure allowing therapeutic agents to be loaded. Main body: In this article, recent studies of injectable hydrogel systems applicable for therapeutic agent delivery, disease/cancer therapy, and tissue engineering have reviewed in terms of the various factors physically and chemically contributing to sol-gel transition via which gels have been formed. The various factors are as follows: several different non-covalent interactions resulting in physical crosslinking (the electrostatic interactions (e.g., the ionic and hydrogen bonds), hydrophobic interactions, ${\pi}$-interactions, and van der Waals forces), in-situ chemical reactions inducing chemical crosslinking (the Diels Alder click reactions, Michael reactions, Schiff base reactions, or enzyme-or photo-mediated reactions), and external stimuli (temperatures, pHs, lights, electric/magnetic fields, ultrasounds, or biomolecular species (e.g., enzyme)). Finally, their applications with accompanying therapeutic agents and notable properties used were reviewed as well. Conclusion: Injectable hydrogels, of which network morphology and properties could be tuned, have shown to control the load and release of therapeutic agents, consequently producing significant therapeutic efficacy. Accordingly, they are believed to be successful and promising biomaterials as scaffolds and carriers of therapeutic agents for disease and cancer therapy and tissue engineering.