• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.369-378
• /
• 1999

This paper presents position control of an electro-hydraulic servo system whoch is operated by four 2-2way high speed on-off valves with either PWM PID control method or sliding mode control method, The advantages of using high speed on-off valves instead of electo-hydraulic servo valves or electro-hydraulic proportional valves are low price robustness for oil contamination and direct control without a D/A converter. The system consists of load cylinder inertia car potentiometer and external load cylinder. The experiments were carried out under several conditions and the results were compared. As a result the sliding mode method has shown good control performance and the robust and stable positioning of the elector-hydraulic servo system can be achieved accurately.

• 한국농공학회논문집
• /
• 제51권4호
• /
• pp.67-73
• /
• 2009

Chemical properties of soil in the proposed horticultural complexes of Saemangeun reclaimed tideland were studied for sustainable development of the newly reclaimed land resources. The soil texture of Gwanghwal, Gyehwa, Mangyeong and Okgu complex area were sandy loam. The pH and ESP (exchangeable sodium percentage) were 7.42 to 7.82 and 61.05 to 73.62 %, respectively. Compared to general agricultural land in Korea, the soil organic matter and other plant nutrients were low. The concentrations of heavy metals in the soil were found to be acceptable except several sites where they doesn't meet the warning standard of agricultural land contamination. Continuous monitoring and interception of external pollutants are suggested for water-soil-plant system conservation.

• 생태와환경
• /
• 제39권4호통권118호
• /
• pp.445-449
• /
• 2006

Phenolic compounds are manufacturing by-products commonly found in industrial wastewater. The toxicity of high level phenolic compounds in wastewater threatens not only the aquatic organisms, but also many components of the adjacent ecosystem. One of the major light harvesting pigments in cyanobacteria is phycocyanin which can be rapidly and specifically degraded by external stimuli such as nutritional depletion or environmental stress. We employed the cyanobacterium Anabaena sp. PCC 7120 as an indicator organism in estimating the pollution level by phenolic compounds. The phycocyanin content of the cyanobacterium decreased without significantly altering the total chlorophyll as the phenol concentration in a medium increased. We examined the phenol contamination level using the correlation of the phycocyanin content and the phenol concentration. Our results indicated that no significant pollution by phenolic compounds was found in several waterbodies in the vicinity of Daegu, South Korea.

• 한국임상수의학회지
• /
• 제26권3호
• /
• pp.286-289
• /
• 2009

Perineal laceration commonly occurs due to dilation of the birth canal at the time of foaling in primiparous mares. A 7-year-old Thoroughbred mare was presented with faecal contamination of the external genitalia. She was having history of constant straining three days after the mare's first foaling. Physical examination revealed the tearing extended from the deep part of vagina through muscles of the perineal body involved rectal floor and anal sphincter. Tentative diagnosed was third-degree perineal laceration therefore one-stage surgical procedure and a modified surgical procedure at three-week intervals was performed. During postoperative care for 3 weeks, soft faces was a key factor in success. After 3 weeks, the patient was recovered to normal condition completely.

• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.35-40
• /
• 2002

Understanding of charging properties of a small particle is necessary to control the particle contamination and to improve productivity of the electronic device in the plasma aided semiconductor manufacturing processes. In this study, the effects of both magnetic field and particle size on the charging properties are experimentally investigated in collisional dusty plasmas. The experiments carried out in the system consisted of a monodisperse particle generation system, a DC magnetized plasma generation system and a charge measurement system. The plasma chamber is made of cross-shape Pyrex surrounded by magnetic bucket (composed of 12 permanent magnetic bar) to confine the plasma. DC magnetic field up to 250G are applied to the plasma zone by external magnetic coil. Previous work shows the charging effect clearly increase with increasing the size of the particle and plasma density, as it was expected.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.261-266
• /
• 1998

In developing the high density memory device, the etching of fine pattern is becoming increasingly important. Therefore, definition of ultra fine line and space pattern and minimization of damage and contamination are essential process. Also, the high density plasma in low operating pressure is necessary. The candidates of high density plasma sources are electron cyclotron resonance plasma, helicon wave plasma, helical resonator, and inductively coupled plasma. In this study, planar type magnetized inductively coupled plasma etcher has been built. The density and temperature of Ar plasma are measured as a function of rf power, flow rate, external magnetic field, and pressure. The oxide etch rate and selectivity to polysilicon are measured as the above mentioned conditions and self-bias voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.214-215
• /
• 2007

Int this paper, we studied the analysis on long-term durability and output power characteristics of PV modules by variation on local thermal property. Using 5 modules(80W), we measured the maximum output power change during the test period. And the optical transmittance of glass was compared with PV module's maximum power fluctuation. The external environment change effected contamination on the entire or local surface of module. This caused the local temperature variation of each solar cell on PV module. The specific analysis is shown in the following paper.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.183-191
• /
• 2023

The potential impact of hypothetical accidents that occur during the immediate and deferred dismantling of the Kori Unit 1 steam generator has been comprehensively evaluated. The evaluation includes determining the inventory of radionuclides in the Steam Generator based on surface contamination measurements, assuming a rate of release for each accident scenario, and applying external and internal exposure dose coefficients to assess the effects of radionuclides on human health. The evaluation also includes calculating the atmospheric dispersion factor using the PAVAN code and analyzing three years of meteorological data from Kori NPP to determine the degree of diffusion of radionuclides in the atmosphere. Overall, the effective dose for residents living in the Exclusion Area Boundary (EAB) of Kori NPP is predicted, an it is found that the maximum level of the dose is 0.034% compared to the annual dose limit of 1 mSv for the general public. This implies that the potential impact of hypothetical accidents on human health discussed above is within acceptable limits.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.41-46
• /
• 2018

This study proves the causes of cylinder and piston jam by scratches which is the fatal problem of hydraulic breaker through the thermal analysis and thermal-structural coupled field analysis. The trouble from the scratch is a complex problem which can be caused by manufacturing process (this is an internal factor) and the users mistake or contamination in the hydraulic circuit (these are an external factor). Hence, it's not easy to investigate the causes, also hard to prevent the recurrence. In this reason, hydraulic breaker manufacturers are trying to improve the manufacturing process such as machining, heat treatment, grinding, cleaning, also to prevent the contamination in hydraulic circuit and to remove the remains. It's being managed thoroughly by manufacturers. This study shows the effect of the temperature rise by the frictional heat generated when the piston hits the tool on the hydraulic oil while the hydraulic breaker is operating, also the temperature distribution when it starts to affect main components of hydraulic breaker. The stress and the amount of deformation also could be found through thermal-structural coupled field analysis. It proved that the stress and deformation are proportionally increased according to the temperature rise in hit area, and it affects the cylinder and the viscosity of hydraulic oil inside the cylinder when it heats up beyond the certain temperature.

• 한국식품위생안전성학회지
• /
• 제35권5호
• /
• pp.459-467
• /
• 2020

본 연구에서는 신선편의식품을 구매한 뒤 집으로 귀가해서 냉장고에 보관하거나 섭취하는데 소요되는 시간과 그에 따른 신선편의식품 내.외부의 온도변화와 미생물학적 변화를 관찰하였다. 시판 중인 신선편의 식품에 대해 위생지표세균인 일반세균, 대장균군 및 대장균, 병원성 미생물인 B. cereus, S. aureus, Salmonella spp., L. monocytogenes를 분석하였다. 설문조사 결과 신선편의식품을 구매 후 귀가 또는 섭취에 소요되는 시간이 최대 3시간 소요되는 것으로 확인되어, 차량 트렁크 내에서 최대 3시간 동안 보관한 결과 차량 트렁크 내부 최고 온도가 봄(3월) 19℃, 여름(7월) 44℃, 가을(9월) 31.3℃, 겨울(2월) 17.6℃로 각각 확인되었으며, 차량 트렁크에서 보관한 신선편의식품의 품온은 최대 봄 18.5℃, 여름 42℃, 가을 29.2℃, 겨울 16.8℃로 확인되었다. 차량 트렁크에 최대 3시간 보관한 신선편의식품의 일반세균수는 봄 3.41 log CFU/g, 여름 4.32 log CFU/g, 가을과 겨울은 각각 3.81 log CFU/g, 3.36 log CFU/g으로 확인되었다. 그 외의 대장균군 및 대장균, B. cereus, Salmonella spp., L. monocytogenes균은 검출되지 않았지만 S. aureus는 여름과 가을철에는 신선편의식품을 1시간만 차량에 보관하더라도 검출되었고, 봄과 겨울은 2시간 이상 차량 트렁크에 보관하였을 때 검출되었다. 이동용기로 흔히 사용되는 종이박스와 스티로폼 박스 내부가 알루미늄필름으로 코팅된 종이 박스를 이용하여 얼음 첨가여부에 따른 이동용기 온도변화 실험과 이동 중 S. aureus의 증식여부를 확인한 결과 스티로폼 박스에서 내부 온도변화가 가장 낮게 유지되었고, 시간 경과에 따른 미생물의 증식도 가장 적게 나타남을 확인할 수 있었다. 이상의 결과로 볼 때 신선편의식품 소비자들에게 구매 후 안전한 섭취를 위해 보관 온도나 시간에 대한 가이드라인과 이동용기를 이용한 신선편의식품의 온도관리에 대한 정보를 제공하여 식품의 안전성을 높이는 홍보가 필요할 것으로 판단된다.